[Sat Oct 15 01:43:55 2011] Detection parameters:
  Position = (826.5, 731.4) = 22 5 54.78 -50 7 9.4
  Extent = 1.0" x 0.9", rotation angle = 155 degrees
  Source counts = 171.4 +/- 13.6
  Background counts = 13.6
  Rate = 0.02 +/- 0.001

[Sat Oct 15 01:43:56 2011] Off-axis axis estimate = 1.26'
[Sat Oct 15 01:44:36 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 01:44:36 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 15 01:44:36 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.375
[Sat Oct 15 01:44:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Sat Oct 15 01:44:36 2011] fullrun_ccd7_acisf10546_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 01:44:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10546_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 01:44:36 2011] fullrun_ccd7_acisf10546_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 01:44:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10546_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 01:44:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10546_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10546_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 01:44:36 2011] fullrun_ccd7_acisf10546_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 01:44:36 2011] fullrun_ccd7_acisf10546_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 01:44:36 2011] Fit fullrun_ccd7_acisf10546_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 01:44:41 2011] Spatial fit model total counts = 197.999000, observed total counts = 198.000000
[Sat Oct 15 01:44:41 2011] Offset between fit and detection position for source 1 = 0.356917 pixels
[Sat Oct 15 01:44:41 2011] 202.717000 total counts/ 101.204000 bgd. counts: snr = 10.090736
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.356917 pixels
  Position = (826.6, 731.8) = 22 5 54.80 -50 7 9.4
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 101.5 +/- 14.2
  Background counts = 101.2
  Rate = 0.01 +/- 0.001
[Sat Oct 15 01:44:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 01:44:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 01:44:41 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 01:44:41 2011] Source does appear to be extended
[Sat Oct 15 01:44:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 01:45:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 01:45:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 01:45:05 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sat Oct 15 01:45:05 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.004
[Sat Oct 15 01:45:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.98"
[Sat Oct 15 01:45:05 2011] fullrun_ccd7_acisf10546_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 01:45:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10546_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 01:45:05 2011] fullrun_ccd7_acisf10546_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 01:45:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10546_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 01:45:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10546_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10546_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 01:45:05 2011] fullrun_ccd7_acisf10546_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 01:45:05 2011] fullrun_ccd7_acisf10546_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 01:45:05 2011] Fit fullrun_ccd7_acisf10546_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 01:45:12 2011] Warning, spatial fit 1 centroid is now closest to src. 6
[Sat Oct 15 01:45:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 01:45:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 01:45:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 01:45:12 2011] Source does appear to be extended
[Sat Oct 15 01:45:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 01:46:07 2011] Not overwriting source region fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 01:46:07 2011] Extracting stamp from image fullrun_ccd7_acisf10546_pi14-548_cl_sm2.00.img.gz, (782, 687) - (872, 777)
[Sat Oct 15 01:46:07 2011] Writing fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 01:46:08 2011] ../../acisf10546/products/events/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_src.evt and ../../acisf10546/products/events/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 01:46:08 2011] Size of ../../acisf10546/products/events/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_src.evt.gz[events] = 183 counts
[Sat Oct 15 01:46:08 2011] Mean chipx,y = (340.64, 514.78)
[Sat Oct 15 01:46:08 2011] Mean tdetx,y = (4257.64, 2216.78)
[Sat Oct 15 01:46:08 2011] chipx,y range = (320.00-363.00, 492.00-537.00)
[Sat Oct 15 01:46:08 2011] Size of ../../acisf10546/products/events/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 189 counts
[Sat Oct 15 01:46:08 2011] ../../acisf10546/products/images/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_src.img and ../../acisf10546/products/images/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 01:46:08 2011] ../../acisf10546/products/spectra/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_src.pi and ../../acisf10546/products/spectra/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 15 01:46:11 2011] ../../acisf10546/products/lightcurves/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_src.lc and ../../acisf10546/products/lightcurves/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 01:46:51 2011] Keeping rmf generated by specextract
[Sat Oct 15 01:46:51 2011] 234.861
[Sat Oct 15 01:46:54 2011] Updating aperture counts using extracted products
[Sat Oct 15 01:46:54 2011] Error reading totcts from fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 01:46:54 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 01:46:54 2011] Using photon index=1.80, rate=0.01, arf fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 01:46:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 01:46:54 2011] Updating source flux to 7.4e-14
[Sat Oct 15 01:47:09 2011] Reading fit data from acisf10546/analysis//spectral/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 01:47:09 2011] Spectral fit parameter nH value = 4.44771e+21
[Sat Oct 15 01:47:09 2011] Spectral fit parameter PhoIndex value = 4.81647
[Sat Oct 15 01:47:09 2011] Failed to get F(0.3-8.0) from acisf10546/analysis//spectral/fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 01:47:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 01:47:09 2011] Using Nh = 4.4e+21, photon index=4.82, rate=0.01, arf fullrun_ccd7_acisf10546_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 01:47:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 01:47:09 2011] Updating source flux to 4.2e-14