[Tue Apr 10 13:13:35 2012] Detection parameters:
  Position = (812.8, 720.0) = 9 55 38.05 69 40 29.6
  Extent = 0.6" x 0.5", rotation angle = 151 degrees
  Source counts = 395.1 +/- 20.8
  Background counts = 36.9
  Rate = 0.004 +/- 0.0002

[Tue Apr 10 13:13:47 2012] Off-axis axis estimate = 3.65'
[Tue Apr 10 13:15:26 2012] Using EEF radius (= 0.73 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:15:26 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Tue Apr 10 13:15:26 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.013
[Tue Apr 10 13:15:26 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 0.73"
[Tue Apr 10 13:15:31 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src33.ximg exists
[Tue Apr 10 13:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src33.csv
[Tue Apr 10 13:15:31 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src33_1.ximg exists
[Tue Apr 10 13:15:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src33.csv
[Tue Apr 10 13:15:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:15:36 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass0_tfrozen_src33.ximg exists
[Tue Apr 10 13:15:36 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Apr 10 13:15:36 2012] Fit fullrun_ccd7_acisf10545_pi14-548_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Apr 10 13:16:05 2012] Spatial fit model total counts = 451.750000, observed total counts = 451.000000
[Tue Apr 10 13:16:05 2012] Offset between fit and detection position for source 25 = 0.787206 pixels
[Tue Apr 10 13:16:05 2012] 453.031600 total counts/ 68.487600 bgd. counts: snr = 46.466511
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.787206 pixels
  Position = (813.3, 720.5) = 9 55 38.04 69 40 29.6
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 384.5 +/- 21.3
  Background counts = 68.5
  Rate = 0.004 +/- 0.0002
[Tue Apr 10 13:16:05 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:16:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:16:05 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:16:05 2012] Source does appear to be extended
[Tue Apr 10 13:16:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:16:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:16:31 2012] Initial guess for spatial extent in simple fitting = 0.73"
[Tue Apr 10 13:16:31 2012] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.767
[Tue Apr 10 13:16:31 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 0.73"
[Tue Apr 10 13:16:36 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src32.ximg exists
[Tue Apr 10 13:16:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src32.csv
[Tue Apr 10 13:16:36 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src32_1.ximg exists
[Tue Apr 10 13:16:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src32.csv
[Tue Apr 10 13:16:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:16:39 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass1_tfrozen_src32.ximg exists
[Tue Apr 10 13:16:39 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Apr 10 13:16:39 2012] Fit fullrun_ccd7_acisf10545_pi14-548_cl_pass1_tfrozen_src32 appears to have run properly
[Tue Apr 10 13:17:04 2012] Spatial fit model total counts = 452.250000, observed total counts = 451.000000
[Tue Apr 10 13:17:04 2012] Offset between fit and detection position for source 25 = 0.005727 pixels
[Tue Apr 10 13:17:04 2012] 453.538500 total counts/ 68.435500 bgd. counts: snr = 46.551768
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.005727 pixels
  Position = (813.3, 720.5) = 9 55 38.04 69 40 29.6
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 385.1 +/- 21.3
  Background counts = 68.4
  Rate = 0.004 +/- 0.0002
[Tue Apr 10 13:17:04 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:17:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:17:04 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:17:04 2012] Source does appear to be extended
[Tue Apr 10 13:17:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:18:50 2012] Not overwriting source region fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_src.reg
[Tue Apr 10 13:18:50 2012] Extracting stamp from image fullrun_ccd7_acisf10545_pi14-548_cl_sm2.00.img.gz, (780, 687) - (847, 754)
[Tue Apr 10 13:18:50 2012] Writing fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25.gif
[Tue Apr 10 13:20:26 2012] ../../acisf10545/products/events/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_src.evt and ../../acisf10545/products/events/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Tue Apr 10 13:20:26 2012] Size of ../../acisf10545/products/events/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_src.evt.gz[events] = 418 counts
[Tue Apr 10 13:20:26 2012] Mean chipx,y = (629.17, 538.98)
[Tue Apr 10 13:20:26 2012] Mean tdetx,y = (4546.17, 2240.98)
[Tue Apr 10 13:20:26 2012] chipx,y range = (610.00-652.00, 519.00-560.00)
[Tue Apr 10 13:20:26 2012] Size of ../../acisf10545/products/events/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 280 counts
[Tue Apr 10 13:20:26 2012] ../../acisf10545/products/images/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_src.img and ../../acisf10545/products/images/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Tue Apr 10 13:20:26 2012] ../../acisf10545/products/spectra/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_src.pi and ../../acisf10545/products/spectra/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Tue Apr 10 13:20:28 2012] ../../acisf10545/products/lightcurves/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_src.lc and ../../acisf10545/products/lightcurves/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Tue Apr 10 13:22:27 2012] Keeping rmf generated by specextract
[Tue Apr 10 13:22:27 2012] 225.008
[Tue Apr 10 13:22:32 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:22:32 2012] Error reading totcts from fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25_src.pi.gz
[Tue Apr 10 13:22:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:22:33 2012] Using photon index=1.80, rate=0.00405, arf fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src25.arf
[Tue Apr 10 13:22:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 13:22:33 2012] Updating source flux to 3.1e-14