[Tue Apr 10 13:13:47 2012] Detection parameters:
  Position = (456.1, 56.9) = 9 56 11.76 69 35 3.6
  Extent = 0.8" x 0.6", rotation angle = 98 degrees
  Source counts = 122.3 +/- 11.5
  Background counts = 9.7
  Rate = 0.001 +/- 0.0001

[Tue Apr 10 13:13:47 2012] Off-axis axis estimate = 4.25'
[Tue Apr 10 13:15:26 2012] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:15:26 2012] Initial guess for spatial extent in simple fitting = 0.91"
[Tue Apr 10 13:15:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.728
[Tue Apr 10 13:15:26 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 0.91"
[Tue Apr 10 13:15:33 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src61.ximg exists
[Tue Apr 10 13:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src61.csv
[Tue Apr 10 13:15:33 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src61_1.ximg exists
[Tue Apr 10 13:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src61.csv
[Tue Apr 10 13:15:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10545_pi14-548_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:15:37 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass0_tfrozen_src61.ximg exists
[Tue Apr 10 13:15:37 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass0_tfrozen_src61_1.ximg exists
[Tue Apr 10 13:15:37 2012] Fit fullrun_ccd7_acisf10545_pi14-548_cl_pass0_tfrozen_src61 appears to have run properly
[Tue Apr 10 13:16:05 2012] Source 197 is offset by 7.473429 and 6.302531 pixels which is larger than
2 X fitted extent = 7.375284 x 7.375284, not incorporating fit results
[Tue Apr 10 13:16:05 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:16:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:16:05 2012] Assessing source extent using major
[Tue Apr 10 13:16:05 2012] Source does appear to be extended
[Tue Apr 10 13:16:05 2012] Computing asymmetry using major and minor axis, asym = 1.33
[Tue Apr 10 13:16:31 2012] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:16:31 2012] Initial guess for spatial extent in simple fitting = 0.91"
[Tue Apr 10 13:16:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.728
[Tue Apr 10 13:16:31 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 0.91"
[Tue Apr 10 13:16:37 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src59.ximg exists
[Tue Apr 10 13:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src59.csv
[Tue Apr 10 13:16:37 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src59_1.ximg exists
[Tue Apr 10 13:16:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src59.csv
[Tue Apr 10 13:16:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10545_pi14-548_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:16:39 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass1_tfrozen_src59.ximg exists
[Tue Apr 10 13:16:39 2012] fullrun_ccd7_acisf10545_pi14-548_cl_pass1_tfrozen_src59_1.ximg exists
[Tue Apr 10 13:16:39 2012] Fit fullrun_ccd7_acisf10545_pi14-548_cl_pass1_tfrozen_src59 appears to have run properly
[Tue Apr 10 13:17:04 2012] Spatial fit model total counts = 141.966000, observed total counts = 142.000000
[Tue Apr 10 13:17:04 2012] Offset between fit and detection position for source 197 = 0.602056 pixels
[Tue Apr 10 13:17:04 2012] 143.317700 total counts/ 20.938700 bgd. counts: snr = 26.744350
Spatial fit parameters:
  Offset between fit and detection position for source 197 = 0.602056 pixels
  Position = (456.6, 57.3) = 9 56 11.76 69 35 3.6
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 122.4 +/- 12.0
  Background counts = 20.9
  Rate = 0.001 +/- 0.0001
[Tue Apr 10 13:17:04 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:17:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:17:04 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:17:04 2012] Source does appear to be extended
[Tue Apr 10 13:17:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:18:52 2012] Not overwriting source region fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_src.reg
[Tue Apr 10 13:18:52 2012] Extracting stamp from image fullrun_ccd7_acisf10545_pi14-548_cl_sm2.00.img.gz, (411, 11) - (503, 103)
[Tue Apr 10 13:18:52 2012] Writing fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197.gif
[Tue Apr 10 13:21:38 2012] ../../acisf10545/products/events/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_src.evt and ../../acisf10545/products/events/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_bgd.evt exist, delete to re-create
[Tue Apr 10 13:21:38 2012] Size of ../../acisf10545/products/events/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_src.evt.gz[events] = 143 counts
[Tue Apr 10 13:21:38 2012] Mean chipx,y = (23.20, 983.50)
[Tue Apr 10 13:21:38 2012] Mean tdetx,y = (3940.20, 2685.50)
[Tue Apr 10 13:21:38 2012] chipx,y range = (3.00-43.00, 965.00-1008.00)
[Tue Apr 10 13:21:38 2012] Size of ../../acisf10545/products/events/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_bgd.evt.gz[events] = 190 counts
[Tue Apr 10 13:21:38 2012] ../../acisf10545/products/images/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_src.img and ../../acisf10545/products/images/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_bgd.img exist, delete to re-create
[Tue Apr 10 13:21:38 2012] ../../acisf10545/products/spectra/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_src.pi and ../../acisf10545/products/spectra/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_bgd.pi exist, delete to re-create
[Tue Apr 10 13:21:41 2012] ../../acisf10545/products/lightcurves/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_src.lc and ../../acisf10545/products/lightcurves/fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_bgd.lc exist, delete to re-create
[Tue Apr 10 13:22:28 2012] Keeping rmf generated by specextract
[Tue Apr 10 13:22:28 2012] 206.651
[Tue Apr 10 13:22:33 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:22:33 2012] Error reading totcts from fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197_src.pi.gz
[Tue Apr 10 13:22:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:22:34 2012] Using photon index=1.80, rate=0.00129, arf fullrun_ccd7_acisf10545_pi14-548_pass1_cl_src197.arf
[Tue Apr 10 13:22:34 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 13:22:34 2012] Updating source flux to 1.2e-14
[Tue Apr 10 13:22:57 2012] Flag b found in src. 197 procflags, skipping spectral fitting