[Tue Apr 10 13:13:32 2012] Detection parameters:
  Position = (891.5, 957.8) = 9 56 58.67 69 38 52.5
  Extent = 1.0" x 0.6", rotation angle = 51 degrees
  Source counts = 633.5 +/- 25.4
  Background counts = 13.5
  Rate = 0.007 +/- 0.0003

[Tue Apr 10 13:13:33 2012] Off-axis axis estimate = 3.59'
[Tue Apr 10 13:15:25 2012] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:15:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 13:15:25 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Tue Apr 10 13:15:25 2012] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.788
[Tue Apr 10 13:15:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.71"
[Tue Apr 10 13:15:25 2012] fullrun_ccd6_acisf10545_pi14-548_cl_pass0_src1.ximg exists
[Tue Apr 10 13:15:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10545_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 13:15:26 2012] fullrun_ccd6_acisf10545_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Apr 10 13:15:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10545_pi14-548_cl_pass0_src1.csv
[Tue Apr 10 13:15:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10545_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10545_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:15:26 2012] fullrun_ccd6_acisf10545_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 13:15:26 2012] fullrun_ccd6_acisf10545_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 13:15:26 2012] Fit fullrun_ccd6_acisf10545_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 13:15:50 2012] Spatial fit model total counts = 654.995000, observed total counts = 655.000000
[Tue Apr 10 13:15:50 2012] Offset between fit and detection position for source 1 = 0.695747 pixels
[Tue Apr 10 13:15:50 2012] 655.200000 total counts/ 18.862000 bgd. counts: snr = 146.519014
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.695747 pixels
  Position = (892.0, 958.2) = 9 56 58.67 69 38 52.5
  Extent = 1.1 (1.0-1.1)", rotation angle = 0
  Source counts = 636.3 +/- 25.6
  Background counts = 18.9
  Rate = 0.007 +/- 0.0003
[Tue Apr 10 13:15:50 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:15:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:15:50 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:15:50 2012] Source does appear to be extended
[Tue Apr 10 13:15:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:16:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 13:16:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 13:16:27 2012] Initial guess for spatial extent in simple fitting = 1.07"
[Tue Apr 10 13:16:27 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.050
[Tue Apr 10 13:16:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.07"
[Tue Apr 10 13:16:27 2012] fullrun_ccd6_acisf10545_pi14-548_cl_pass1_src1.ximg exists
[Tue Apr 10 13:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10545_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 13:16:28 2012] fullrun_ccd6_acisf10545_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Apr 10 13:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10545_pi14-548_cl_pass1_src1.csv
[Tue Apr 10 13:16:28 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10545_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10545_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 13:16:30 2012] fullrun_ccd6_acisf10545_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 13:16:30 2012] fullrun_ccd6_acisf10545_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 13:16:30 2012] Fit fullrun_ccd6_acisf10545_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 13:16:47 2012] Spatial fit model total counts = 660.338000, observed total counts = 659.000000
[Tue Apr 10 13:16:47 2012] Offset between fit and detection position for source 1 = 0.014441 pixels
[Tue Apr 10 13:16:47 2012] 660.428100 total counts/ 20.291100 bgd. counts: snr = 142.108526
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014441 pixels
  Position = (892.0, 958.3) = 9 56 58.67 69 38 52.5
  Extent = 1.1 (1.0-1.1)", rotation angle = 0
  Source counts = 640.1 +/- 25.7
  Background counts = 20.3
  Rate = 0.007 +/- 0.0003
[Tue Apr 10 13:16:47 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 13:16:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 13:16:47 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 13:16:47 2012] Source does appear to be extended
[Tue Apr 10 13:16:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 13:17:41 2012] Not overwriting source region fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_src.reg
[Tue Apr 10 13:17:41 2012] Extracting stamp from image fullrun_ccd6_acisf10545_pi14-548_cl_sm2.00.img.gz, (843, 909) - (941, 1007)
[Tue Apr 10 13:17:41 2012] Writing fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1.gif
[Tue Apr 10 13:17:42 2012] ../../acisf10545/products/events/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_src.evt and ../../acisf10545/products/events/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 13:17:42 2012] Size of ../../acisf10545/products/events/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_src.evt.gz[events] = 657 counts
[Tue Apr 10 13:17:42 2012] Mean chipx,y = (816.40, 351.42)
[Tue Apr 10 13:17:42 2012] Mean tdetx,y = (3691.40, 2053.42)
[Tue Apr 10 13:17:42 2012] chipx,y range = (794.00-840.00, 331.00-372.00)
[Tue Apr 10 13:17:42 2012] Size of ../../acisf10545/products/events/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 126 counts
[Tue Apr 10 13:17:42 2012] ../../acisf10545/products/images/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_src.img and ../../acisf10545/products/images/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 13:17:42 2012] ../../acisf10545/products/spectra/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_src.pi and ../../acisf10545/products/spectra/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 13:17:47 2012] ../../acisf10545/products/lightcurves/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_src.lc and ../../acisf10545/products/lightcurves/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 13:18:47 2012] Keeping rmf generated by specextract
[Tue Apr 10 13:18:47 2012] 200.595
[Tue Apr 10 13:22:31 2012] Updating aperture counts using extracted products
[Tue Apr 10 13:22:31 2012] Error reading totcts from fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Apr 10 13:22:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:22:32 2012] Using photon index=1.80, rate=0.00674, arf fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 13:22:32 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 13:22:32 2012] Updating source flux to 7.3e-14
[Tue Apr 10 13:22:57 2012] Reading fit data from acisf10545/analysis//spectral/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_pl.csv
[Tue Apr 10 13:22:57 2012] Spectral fit parameter nH value = 2.21085e+21
[Tue Apr 10 13:22:57 2012] Spectral fit parameter PhoIndex value = 2.05964
[Tue Apr 10 13:22:57 2012] Failed to get F(0.3-8.0) from acisf10545/analysis//spectral/fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 13:22:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 13:22:57 2012] Using Nh = 2.2e+21, photon index=2.06, rate=0.00674, arf fullrun_ccd6_acisf10545_pi14-548_pass1_cl_src1.arf
[Tue Apr 10 13:22:57 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 13:22:57 2012] Updating source flux to 6.7e-14