[Tue Apr 10 18:08:01 2012] Detection parameters:
  Position = (1187.6, 878.6) = 9 54 54.55 69 45 59.0
  Extent = 1.6" x 1.3", rotation angle = 175 degrees
  Source counts = 209.5 +/- 16.9
  Background counts = 77.5
  Rate = 0.002 +/- 0.0001

[Tue Apr 10 18:08:04 2012] Off-axis axis estimate = 6.64'
[Tue Apr 10 18:10:04 2012] Using EEF radius (= 1.97 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:10:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 18:10:04 2012] Initial guess for spatial extent in simple fitting = 1.97"
[Tue Apr 10 18:10:04 2012] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.996
[Tue Apr 10 18:10:04 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 1.97"
[Tue Apr 10 18:10:07 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src57.ximg exists
[Tue Apr 10 18:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src57.csv
[Tue Apr 10 18:10:07 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src57_1.ximg exists
[Tue Apr 10 18:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src57.csv
[Tue Apr 10 18:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:10:09 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass0_tfrozen_src57.ximg exists
[Tue Apr 10 18:10:09 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass0_tfrozen_src57_1.ximg exists
[Tue Apr 10 18:10:09 2012] Fit fullrun_ccd7_acisf10542_pi14-548_cl_pass0_tfrozen_src57 appears to have run properly
[Tue Apr 10 18:10:41 2012] Spatial fit model total counts = 272.656000, observed total counts = 272.000000
[Tue Apr 10 18:10:41 2012] Offset between fit and detection position for source 94 = 0.499692 pixels
[Tue Apr 10 18:10:41 2012] 276.215000 total counts/ 127.902000 bgd. counts: snr = 13.114162
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 0.499692 pixels
  Position = (1187.3, 879.0) = 9 54 54.62 69 45 59.0
  Extent = 1.8 (1.4-2.4)", rotation angle = 0
  Source counts = 148.3 +/- 16.6
  Background counts = 127.9
  Rate = 0.001 +/- 0.0001
[Tue Apr 10 18:10:42 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:10:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:10:42 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:10:42 2012] Source does appear to be extended
[Tue Apr 10 18:10:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:11:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:11:07 2012] Initial guess for spatial extent in simple fitting = 1.81"
[Tue Apr 10 18:11:07 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.027
[Tue Apr 10 18:11:07 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 1.81"
[Tue Apr 10 18:11:11 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src55.ximg exists
[Tue Apr 10 18:11:11 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src55.csv
[Tue Apr 10 18:11:11 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src55_1.ximg exists
[Tue Apr 10 18:11:11 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src55.csv
[Tue Apr 10 18:11:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:11:13 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass1_tfrozen_src55.ximg exists
[Tue Apr 10 18:11:13 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass1_tfrozen_src55_1.ximg exists
[Tue Apr 10 18:11:13 2012] Fit fullrun_ccd7_acisf10542_pi14-548_cl_pass1_tfrozen_src55 appears to have run properly
[Tue Apr 10 18:11:35 2012] Spatial fit model total counts = 264.001000, observed total counts = 264.000000
[Tue Apr 10 18:11:35 2012] Offset between fit and detection position for source 94 = 0.077041 pixels
[Tue Apr 10 18:11:35 2012] 266.559000 total counts/ 117.563000 bgd. counts: snr = 13.741663
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 0.077041 pixels
  Position = (1187.3, 879.1) = 9 54 54.62 69 45 59.1
  Extent = 1.8 (1.4-2.5)", rotation angle = 0
  Source counts = 149.0 +/- 16.3
  Background counts = 117.6
  Rate = 0.001 +/- 0.0001
[Tue Apr 10 18:11:35 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:11:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:11:35 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:11:35 2012] Source does appear to be extended
[Tue Apr 10 18:11:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:13:55 2012] Not overwriting source region fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_src.reg
[Tue Apr 10 18:13:55 2012] Extracting stamp from image fullrun_ccd7_acisf10542_pi14-548_cl_sm2.00.img.gz, (1104, 796) - (1271, 962)
[Tue Apr 10 18:13:55 2012] Writing fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94.gif
[Tue Apr 10 18:16:25 2012] ../../acisf10542/products/events/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_src.evt and ../../acisf10542/products/events/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_bgd.evt exist, delete to re-create
[Tue Apr 10 18:16:25 2012] Size of ../../acisf10542/products/events/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_src.evt.gz[events] = 282 counts
[Tue Apr 10 18:16:25 2012] Mean chipx,y = (892.13, 895.17)
[Tue Apr 10 18:16:25 2012] Mean tdetx,y = (4809.13, 2597.17)
[Tue Apr 10 18:16:25 2012] chipx,y range = (864.00-919.00, 866.00-924.00)
[Tue Apr 10 18:16:26 2012] Size of ../../acisf10542/products/events/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_bgd.evt.gz[events] = 955 counts
[Tue Apr 10 18:16:26 2012] ../../acisf10542/products/images/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_src.img and ../../acisf10542/products/images/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_bgd.img exist, delete to re-create
[Tue Apr 10 18:16:26 2012] ../../acisf10542/products/spectra/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_src.pi and ../../acisf10542/products/spectra/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_bgd.pi exist, delete to re-create
[Tue Apr 10 18:16:28 2012] ../../acisf10542/products/lightcurves/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_src.lc and ../../acisf10542/products/lightcurves/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_bgd.lc exist, delete to re-create
[Tue Apr 10 18:17:21 2012] Keeping rmf generated by specextract
[Tue Apr 10 18:17:21 2012] 206.014
[Tue Apr 10 18:17:28 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:17:28 2012] Error reading totcts from fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94_src.pi.gz
[Tue Apr 10 18:17:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:17:29 2012] Using photon index=1.80, rate=0.00126, arf fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src94.arf
[Tue Apr 10 18:17:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 18:17:29 2012] Updating source flux to 1.1e-14