[Tue Apr 10 18:07:57 2012] Detection parameters:
  Position = (644.1, 201.3) = 9 55 46.14 69 40 26.5
  Extent = 0.6" x 0.6", rotation angle = 112 degrees
  Source counts = 796.7 +/- 37.6
  Background counts = 614.3
  Rate = 0.007 +/- 0.0003

[Tue Apr 10 18:08:04 2012] Off-axis axis estimate = 1.87'
[Tue Apr 10 18:10:04 2012] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:10:04 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Tue Apr 10 18:10:04 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.823
[Tue Apr 10 18:10:04 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 0.42"
[Tue Apr 10 18:10:07 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src30.ximg exists
[Tue Apr 10 18:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src30.csv
[Tue Apr 10 18:10:07 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src30_1.ximg exists
[Tue Apr 10 18:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src30.csv
[Tue Apr 10 18:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10542_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:10:09 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Tue Apr 10 18:10:09 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Apr 10 18:10:09 2012] Fit fullrun_ccd7_acisf10542_pi14-548_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Apr 10 18:10:41 2012] Spatial fit model total counts = 2376.000000, observed total counts = 2376.000000
[Tue Apr 10 18:10:41 2012] Offset between fit and detection position for source 35 = 0.398366 pixels
[Tue Apr 10 18:10:41 2012] 2371.820000 total counts/ 1785.210000 bgd. counts: snr = 13.883687
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.398366 pixels
  Position = (644.3, 201.7) = 9 55 46.17 69 40 26.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 586.6 +/- 48.7
  Background counts = 1785.2
  Rate = 0.005 +/- 0.0004
[Tue Apr 10 18:10:42 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:10:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:10:42 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:10:42 2012] Source does appear to be extended
[Tue Apr 10 18:10:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:11:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:11:07 2012] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Apr 10 18:11:07 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.904
[Tue Apr 10 18:11:07 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 0.53"
[Tue Apr 10 18:11:11 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src30.ximg exists
[Tue Apr 10 18:11:11 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src30.csv
[Tue Apr 10 18:11:11 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src30_1.ximg exists
[Tue Apr 10 18:11:11 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src30.csv
[Tue Apr 10 18:11:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10542_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:11:13 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Tue Apr 10 18:11:13 2012] fullrun_ccd7_acisf10542_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Apr 10 18:11:13 2012] Fit fullrun_ccd7_acisf10542_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Apr 10 18:11:35 2012] Spatial fit model total counts = 2374.320000, observed total counts = 2376.000000
[Tue Apr 10 18:11:35 2012] Offset between fit and detection position for source 35 = 0.001696 pixels
[Tue Apr 10 18:11:35 2012] 2369.139000 total counts/ 1782.560000 bgd. counts: snr = 13.893269
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.001696 pixels
  Position = (644.3, 201.7) = 9 55 46.17 69 40 26.4
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 586.6 +/- 48.7
  Background counts = 1782.6
  Rate = 0.005 +/- 0.0004
[Tue Apr 10 18:11:35 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:11:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:11:35 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:11:35 2012] Source does appear to be extended
[Tue Apr 10 18:11:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:13:53 2012] Not overwriting source region fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_src.reg
[Tue Apr 10 18:13:53 2012] Extracting stamp from image fullrun_ccd7_acisf10542_pi14-548_cl_sm2.00.img.gz, (620, 177) - (669, 226)
[Tue Apr 10 18:13:53 2012] Writing fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35.gif
[Tue Apr 10 18:15:22 2012] ../../acisf10542/products/events/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_src.evt and ../../acisf10542/products/events/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_bgd.evt exist, delete to re-create
[Tue Apr 10 18:15:23 2012] Size of ../../acisf10542/products/events/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_src.evt.gz[events] = 1026 counts
[Tue Apr 10 18:15:23 2012] Mean chipx,y = (50.03, 678.81)
[Tue Apr 10 18:15:23 2012] Mean tdetx,y = (3967.03, 2380.81)
[Tue Apr 10 18:15:23 2012] chipx,y range = (29.00-71.00, 658.00-701.00)
[Tue Apr 10 18:15:23 2012] Size of ../../acisf10542/products/events/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 972 counts
[Tue Apr 10 18:15:23 2012] ../../acisf10542/products/images/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_src.img and ../../acisf10542/products/images/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_bgd.img exist, delete to re-create
[Tue Apr 10 18:15:23 2012] ../../acisf10542/products/spectra/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_src.pi and ../../acisf10542/products/spectra/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_bgd.pi exist, delete to re-create
[Tue Apr 10 18:15:25 2012] ../../acisf10542/products/lightcurves/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_src.lc and ../../acisf10542/products/lightcurves/fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_bgd.lc exist, delete to re-create
[Tue Apr 10 18:17:20 2012] Keeping rmf generated by specextract
[Tue Apr 10 18:17:20 2012] 227.027
[Tue Apr 10 18:17:28 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:17:28 2012] Error reading totcts from fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35_src.pi.gz
[Tue Apr 10 18:17:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:17:29 2012] Using photon index=1.80, rate=0.00495, arf fullrun_ccd7_acisf10542_pi14-548_pass1_cl_src35.arf
[Tue Apr 10 18:17:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 18:17:29 2012] Updating source flux to 3.8e-14