[Tue Apr 10 18:07:53 2012] Detection parameters:
  Position = (959.5, 1097.5) = 9 55 56.20 69 40 1.0
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 138.7 +/- 20.3
  Background counts = 272.3
  Rate = 0.001 +/- 0.0002

[Tue Apr 10 18:07:54 2012] Off-axis axis estimate = 2.06'
[Tue Apr 10 18:10:01 2012] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:10:01 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Tue Apr 10 18:10:01 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.780
[Tue Apr 10 18:10:01 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 0.44"
[Tue Apr 10 18:10:03 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src40.ximg exists
[Tue Apr 10 18:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src40.csv
[Tue Apr 10 18:10:03 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src40_1.ximg exists
[Tue Apr 10 18:10:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src40.csv
[Tue Apr 10 18:10:03 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:10:04 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass0_tfrozen_src40.ximg exists
[Tue Apr 10 18:10:04 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass0_tfrozen_src40_1.ximg exists
[Tue Apr 10 18:10:04 2012] Fit fullrun_ccd6_acisf10542_pi14-548_cl_pass0_tfrozen_src40 appears to have run properly
[Tue Apr 10 18:10:28 2012] Spatial fit model total counts = 637.998000, observed total counts = 638.000000
[Tue Apr 10 18:10:28 2012] Offset between fit and detection position for source 46 = 3.707740 pixels
[Tue Apr 10 18:10:28 2012] 638.511100 total counts/ 591.542000 bgd. counts: snr = 1.931165
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 3.707740 pixels
  Position = (960.8, 1101.0) = 9 55 56.13 69 40 2.5
  Extent = 0.9 (0.3-1.5)", rotation angle = 0
  Source counts = 47.0 +/- 25.3
  Background counts = 591.5
  Rate = 0.0004 +/- 0.0002
[Tue Apr 10 18:10:28 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:10:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:10:28 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:10:28 2012] Source does appear to be extended
[Tue Apr 10 18:10:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:11:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:11:03 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Tue Apr 10 18:11:03 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.897
[Tue Apr 10 18:11:03 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 0.92"
[Tue Apr 10 18:11:04 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src30.ximg exists
[Tue Apr 10 18:11:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src30.csv
[Tue Apr 10 18:11:04 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src30_1.ximg exists
[Tue Apr 10 18:11:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src30.csv
[Tue Apr 10 18:11:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:11:06 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass1_tfrozen_src30.ximg exists
[Tue Apr 10 18:11:06 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Apr 10 18:11:06 2012] Fit fullrun_ccd6_acisf10542_pi14-548_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Apr 10 18:11:23 2012] Spatial fit model total counts = 636.397000, observed total counts = 636.000000
[Tue Apr 10 18:11:23 2012] Offset between fit and detection position for source 46 = 0.364411 pixels
[Tue Apr 10 18:11:23 2012] 633.762500 total counts/ 575.885000 bgd. counts: snr = 2.411803
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.364411 pixels
  Position = (961.0, 1101.3) = 9 55 56.11 69 40 2.6
  Extent = 1.0 (0.6-1.8)", rotation angle = 0
  Source counts = 57.9 +/- 25.2
  Background counts = 575.9
  Rate = 0.0005 +/- 0.0002
[Tue Apr 10 18:11:23 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:11:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:11:23 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:11:23 2012] Source does appear to be extended
[Tue Apr 10 18:11:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:11:54 2012] Not overwriting source region fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_src.reg
[Tue Apr 10 18:11:54 2012] Extracting stamp from image fullrun_ccd6_acisf10542_pi14-548_cl_sm2.00.img.gz, (914, 1054) - (1008, 1149)
[Tue Apr 10 18:11:54 2012] Writing fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46.gif
[Tue Apr 10 18:13:29 2012] ../../acisf10542/products/events/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_src.evt and ../../acisf10542/products/events/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_bgd.evt exist, delete to re-create
[Tue Apr 10 18:13:29 2012] Size of ../../acisf10542/products/events/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_src.evt.gz[events] = 572 counts
[Tue Apr 10 18:13:29 2012] Mean chipx,y = (1006.00, 602.32)
[Tue Apr 10 18:13:29 2012] Mean tdetx,y = (3881.00, 2304.32)
[Tue Apr 10 18:13:29 2012] chipx,y range = (982.00-1023.00, 578.00-631.00)
[Tue Apr 10 18:13:29 2012] Size of ../../acisf10542/products/events/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_bgd.evt.gz[events] = 1881 counts
[Tue Apr 10 18:13:29 2012] ../../acisf10542/products/images/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_src.img and ../../acisf10542/products/images/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_bgd.img exist, delete to re-create
[Tue Apr 10 18:13:29 2012] ../../acisf10542/products/spectra/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_src.pi and ../../acisf10542/products/spectra/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_bgd.pi exist, delete to re-create
[Tue Apr 10 18:13:29 2012] Not generating rmf since there are only 57 counts
[Tue Apr 10 18:13:32 2012] ../../acisf10542/products/lightcurves/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_src.lc and ../../acisf10542/products/lightcurves/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_bgd.lc exist, delete to re-create
[Tue Apr 10 18:13:51 2012] 199
[Tue Apr 10 18:17:27 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:17:27 2012] Error reading totcts from fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46_src.pi.gz
[Tue Apr 10 18:17:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:17:27 2012] Using photon index=1.80, rate=0.000488, arf fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src46.arf
[Tue Apr 10 18:17:27 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 18:17:27 2012] Updating source flux to 5.4e-15
[Tue Apr 10 18:17:33 2012] Source 46 has fewer than 100.000000 counts, skipping spectral fitting