[Tue Apr 10 18:07:52 2012] Detection parameters:
  Position = (577.9, 1273.7) = 9 56 32.27 69 41 27.5
  Extent = 0.5" x 0.5", rotation angle = 58 degrees
  Source counts = 21.5 +/- 5.0
  Background counts = 3.5
  Rate = 0.0002 +/- 4e-05

[Tue Apr 10 18:07:54 2012] Off-axis axis estimate = 3.15'
[Tue Apr 10 18:10:01 2012] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:10:01 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Tue Apr 10 18:10:01 2012] source mask rpix=1.2, npix_max = 12, mask sum = 10, frac = 0.822
[Tue Apr 10 18:10:01 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.61"
[Tue Apr 10 18:10:02 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src13.ximg exists
[Tue Apr 10 18:10:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src13.csv
[Tue Apr 10 18:10:02 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src13_1.ximg exists
[Tue Apr 10 18:10:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src13.csv
[Tue Apr 10 18:10:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10542_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:10:03 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Tue Apr 10 18:10:03 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Apr 10 18:10:03 2012] Fit fullrun_ccd6_acisf10542_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Apr 10 18:10:28 2012] Spatial fit model total counts = 34.377200, observed total counts = 35.000000
[Tue Apr 10 18:10:28 2012] Offset between fit and detection position for source 15 = 0.262689 pixels
[Tue Apr 10 18:10:28 2012] 33.393450 total counts/ 4.498250 bgd. counts: snr = 13.623977
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.262689 pixels
  Position = (578.1, 1273.5) = 9 56 32.30 69 41 27.1
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 28.9 +/- 5.8
  Background counts = 4.5
  Rate = 0.0002 +/- 5e-05
[Tue Apr 10 18:10:28 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:10:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:10:28 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:10:28 2012] Source does appear to be extended
[Tue Apr 10 18:10:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:11:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 18:11:03 2012] Initial guess for spatial extent in simple fitting = 0.74"
[Tue Apr 10 18:11:03 2012] source mask rpix=1.5, npix_max = 15, mask sum = 14, frac = 0.876
[Tue Apr 10 18:11:03 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.74"
[Tue Apr 10 18:11:04 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src11.ximg exists
[Tue Apr 10 18:11:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src11.csv
[Tue Apr 10 18:11:04 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Apr 10 18:11:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src11.csv
[Tue Apr 10 18:11:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10542_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 18:11:04 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Apr 10 18:11:04 2012] fullrun_ccd6_acisf10542_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Apr 10 18:11:04 2012] Fit fullrun_ccd6_acisf10542_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Apr 10 18:11:23 2012] Spatial fit model total counts = 35.004400, observed total counts = 36.000000
[Tue Apr 10 18:11:23 2012] Offset between fit and detection position for source 15 = 0.014085 pixels
[Tue Apr 10 18:11:23 2012] 33.746080 total counts/ 5.347780 bgd. counts: snr = 12.280204
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.014085 pixels
  Position = (578.1, 1273.5) = 9 56 32.30 69 41 27.1
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 28.4 +/- 5.8
  Background counts = 5.3
  Rate = 0.0002 +/- 5e-05
[Tue Apr 10 18:11:23 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 18:11:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 18:11:23 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 18:11:23 2012] Source does appear to be extended
[Tue Apr 10 18:11:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 18:11:54 2012] Not overwriting source region fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_src.reg
[Tue Apr 10 18:11:54 2012] Extracting stamp from image fullrun_ccd6_acisf10542_pi14-548_cl_sm2.00.img.gz, (544, 1239) - (613, 1308)
[Tue Apr 10 18:11:54 2012] Writing fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15.gif
[Tue Apr 10 18:12:30 2012] ../../acisf10542/products/events/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_src.evt and ../../acisf10542/products/events/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Apr 10 18:12:30 2012] Size of ../../acisf10542/products/events/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_src.evt.gz[events] = 30 counts
[Tue Apr 10 18:12:30 2012] Mean chipx,y = (1003.43, 177.47)
[Tue Apr 10 18:12:30 2012] Mean tdetx,y = (3878.43, 1879.47)
[Tue Apr 10 18:12:30 2012] chipx,y range = (988.00-1022.00, 164.00-199.00)
[Tue Apr 10 18:12:30 2012] Size of ../../acisf10542/products/events/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 69 counts
[Tue Apr 10 18:12:30 2012] ../../acisf10542/products/images/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_src.img and ../../acisf10542/products/images/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Apr 10 18:12:30 2012] ../../acisf10542/products/spectra/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_src.pi and ../../acisf10542/products/spectra/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Apr 10 18:12:30 2012] Not generating rmf since there are only 28 counts
[Tue Apr 10 18:12:35 2012] ../../acisf10542/products/lightcurves/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_src.lc and ../../acisf10542/products/lightcurves/fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Apr 10 18:13:51 2012] 199.111
[Tue Apr 10 18:17:26 2012] Updating aperture counts using extracted products
[Tue Apr 10 18:17:26 2012] Error reading totcts from fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15_src.pi.gz
[Tue Apr 10 18:17:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 18:17:27 2012] Using photon index=1.80, rate=0.000239, arf fullrun_ccd6_acisf10542_pi14-548_pass1_cl_src15.arf
[Tue Apr 10 18:17:27 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 18:17:27 2012] Updating source flux to 2.6e-15
[Tue Apr 10 18:17:33 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting