[Fri Oct 21 14:48:38 2011] Detection parameters:
  Position = (1260.5, 553.9) = 11 24 10.09 53 56 35.6
  Extent = 2.0" x 1.7", rotation angle = 105 degrees
  Source counts = 85.7 +/- 10.0
  Background counts = 14.3
  Rate = 0.002 +/- 0.0002

[Fri Oct 21 14:48:39 2011] Off-axis axis estimate = 7.79'
[Fri Oct 21 14:49:36 2011] Using EEF radius (= 2.69 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 14:49:36 2011] Initial guess for spatial extent in simple fitting = 2.69"
[Fri Oct 21 14:49:36 2011] source mask rpix=5.5, npix_max = 142, mask sum = 132, frac = 0.929
[Fri Oct 21 14:49:36 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.69"
[Fri Oct 21 14:49:37 2011] fullrun_ccd3_acisf10541_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 21 14:49:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10541_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 14:49:37 2011] fullrun_ccd3_acisf10541_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 21 14:49:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10541_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 14:49:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10541_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10541_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 14:49:37 2011] fullrun_ccd3_acisf10541_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 21 14:49:37 2011] fullrun_ccd3_acisf10541_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 21 14:49:37 2011] Fit fullrun_ccd3_acisf10541_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 21 14:49:45 2011] Spatial fit model total counts = 107.000000, observed total counts = 107.000000
[Fri Oct 21 14:49:45 2011] Offset between fit and detection position for source 3 = 0.615768 pixels
[Fri Oct 21 14:49:45 2011] 106.948000 total counts/ 19.185500 bgd. counts: snr = 20.036526
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.615768 pixels
  Position = (1261.0, 554.3) = 11 24 10.09 53 56 35.5
  Extent = 2.2 (1.9-2.8)", rotation angle = 0
  Source counts = 87.8 +/- 10.3
  Background counts = 19.2
  Rate = 0.002 +/- 0.0002
[Fri Oct 21 14:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 14:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 14:49:45 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 14:49:45 2011] Source does appear to be extended
[Fri Oct 21 14:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 14:50:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 14:50:08 2011] Initial guess for spatial extent in simple fitting = 2.24"
[Fri Oct 21 14:50:08 2011] source mask rpix=4.6, npix_max = 102, mask sum = 100, frac = 0.977
[Fri Oct 21 14:50:08 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.24"
[Fri Oct 21 14:50:09 2011] fullrun_ccd3_acisf10541_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 21 14:50:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10541_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 14:50:09 2011] fullrun_ccd3_acisf10541_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 21 14:50:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10541_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 14:50:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10541_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10541_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 14:50:09 2011] fullrun_ccd3_acisf10541_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 21 14:50:09 2011] fullrun_ccd3_acisf10541_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 21 14:50:09 2011] Fit fullrun_ccd3_acisf10541_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 21 14:50:17 2011] Spatial fit model total counts = 97.844500, observed total counts = 98.000000
[Fri Oct 21 14:50:17 2011] Offset between fit and detection position for source 3 = 0.282432 pixels
[Fri Oct 21 14:50:17 2011] 98.268110 total counts/ 4.917210 bgd. counts: snr = 42.097774
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.282432 pixels
  Position = (1260.9, 554.0) = 11 24 10.10 53 56 35.4
  Extent = 2.3 (2.0-2.8)", rotation angle = 0
  Source counts = 93.4 +/- 9.9
  Background counts = 4.9
  Rate = 0.002 +/- 0.0002
[Fri Oct 21 14:50:17 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 14:50:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 14:50:17 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 14:50:17 2011] Source does appear to be extended
[Fri Oct 21 14:50:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 14:50:58 2011] Not overwriting source region fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 21 14:50:58 2011] Extracting stamp from image fullrun_ccd3_acisf10541_pi14-548_cl_sm2.00.img.gz, (1153, 447) - (1368, 661)
[Fri Oct 21 14:50:58 2011] Writing fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3.gif
[Fri Oct 21 14:51:07 2011] ../../acisf10541/products/events/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_src.evt and ../../acisf10541/products/events/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 21 14:51:07 2011] Size of ../../acisf10541/products/events/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_src.evt.gz[events] = 106 counts
[Fri Oct 21 14:51:07 2011] Mean chipx,y = (86.97, 903.74)
[Fri Oct 21 14:51:07 2011] Mean tdetx,y = (4228.26, 3147.97)
[Fri Oct 21 14:51:07 2011] chipx,y range = (59.00-114.00, 874.00-932.00)
[Fri Oct 21 14:51:07 2011] Size of ../../acisf10541/products/events/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 220 counts
[Fri Oct 21 14:51:07 2011] ../../acisf10541/products/images/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_src.img and ../../acisf10541/products/images/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 21 14:51:07 2011] ../../acisf10541/products/spectra/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_src.pi and ../../acisf10541/products/spectra/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 21 14:51:07 2011] Not generating rmf since there are only 93 counts
[Fri Oct 21 14:51:09 2011] ../../acisf10541/products/lightcurves/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_src.lc and ../../acisf10541/products/lightcurves/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 21 14:51:23 2011] 173.009
[Fri Oct 21 14:54:14 2011] Updating aperture counts using extracted products
[Fri Oct 21 14:54:14 2011] Error reading totcts from fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 21 14:54:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 14:54:14 2011] Using photon index=1.80, rate=0.00173, arf fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 14:54:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 14:54:14 2011] Updating source flux to 2.4e-14
[Fri Oct 21 14:54:19 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 21 14:54:20 2011] acisf10541/analysis//spectral/fullrun_ccd3_acisf10541_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete