[Wed Oct  5 17:33:38 2011] Detection parameters:
  Position = (497.2, 1031.5) = 11 48 43.99 -27 21 3.0
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 293.8 +/- 17.3
  Background counts = 4.2
  Rate = 0.008 +/- 0.0005

[Wed Oct  5 17:33:39 2011] Off-axis axis estimate = 1.60'
[Wed Oct  5 17:34:38 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:34:38 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Oct  5 17:34:38 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.313
[Wed Oct  5 17:34:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Wed Oct  5 17:34:39 2011] fullrun_ccd7_acisf10540_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 17:34:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10540_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 17:34:39 2011] fullrun_ccd7_acisf10540_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 17:34:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10540_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 17:34:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10540_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10540_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:34:39 2011] fullrun_ccd7_acisf10540_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 17:34:39 2011] fullrun_ccd7_acisf10540_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 17:34:39 2011] Fit fullrun_ccd7_acisf10540_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 17:34:54 2011] Spatial fit model total counts = 301.445000, observed total counts = 302.000000
[Wed Oct  5 17:34:54 2011] Offset between fit and detection position for source 2 = 0.699614 pixels
[Wed Oct  5 17:34:54 2011] 302.812300 total counts/ 14.020300 bgd. counts: snr = 77.127012
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.699614 pixels
  Position = (497.7, 1032.0) = 11 48 43.99 -27 21 3.0
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 288.8 +/- 17.4
  Background counts = 14.0
  Rate = 0.008 +/- 0.0005
[Wed Oct  5 17:34:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:34:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:34:54 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:34:54 2011] Source does appear to be extended
[Wed Oct  5 17:34:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:35:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:35:12 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Wed Oct  5 17:35:12 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.983
[Wed Oct  5 17:35:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.50"
[Wed Oct  5 17:35:13 2011] fullrun_ccd7_acisf10540_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 17:35:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10540_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 17:35:13 2011] fullrun_ccd7_acisf10540_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 17:35:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10540_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 17:35:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10540_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10540_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:35:13 2011] fullrun_ccd7_acisf10540_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 17:35:13 2011] fullrun_ccd7_acisf10540_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 17:35:13 2011] Fit fullrun_ccd7_acisf10540_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 17:35:22 2011] Spatial fit model total counts = 301.980000, observed total counts = 302.000000
[Wed Oct  5 17:35:22 2011] Offset between fit and detection position for source 2 = 0.001239 pixels
[Wed Oct  5 17:35:22 2011] 303.033900 total counts/ 13.720900 bgd. counts: snr = 78.104607
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001239 pixels
  Position = (497.7, 1032.0) = 11 48 43.99 -27 21 3.0
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 289.3 +/- 17.4
  Background counts = 13.7
  Rate = 0.008 +/- 0.0005
[Wed Oct  5 17:35:22 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:35:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:35:22 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:35:22 2011] Source does appear to be extended
[Wed Oct  5 17:35:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:39:05 2011] Not overwriting source region fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_src.reg
[Wed Oct  5 17:39:05 2011] Extracting stamp from image fullrun_ccd7_acisf10540_pi14-548_cl_sm2.00.img.gz, (475, 1009) - (521, 1055)
[Wed Oct  5 17:39:05 2011] Writing fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2.gif
[Wed Oct  5 17:39:06 2011] ../../acisf10540/products/events/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_src.evt and ../../acisf10540/products/events/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct  5 17:39:06 2011] Size of ../../acisf10540/products/events/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_src.evt.gz[events] = 291 counts
[Wed Oct  5 17:39:06 2011] Mean chipx,y = (185.90, 305.93)
[Wed Oct  5 17:39:06 2011] Mean tdetx,y = (4102.90, 2007.93)
[Wed Oct  5 17:39:06 2011] chipx,y range = (168.00-205.00, 288.00-323.00)
[Wed Oct  5 17:39:06 2011] Size of ../../acisf10540/products/events/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 16 counts
[Wed Oct  5 17:39:06 2011] ../../acisf10540/products/images/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_src.img and ../../acisf10540/products/images/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct  5 17:39:06 2011] ../../acisf10540/products/spectra/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_src.pi and ../../acisf10540/products/spectra/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct  5 17:39:12 2011] ../../acisf10540/products/lightcurves/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_src.lc and ../../acisf10540/products/lightcurves/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct  5 17:40:22 2011] Keeping rmf generated by specextract
[Wed Oct  5 17:40:22 2011] 232.097
[Wed Oct  5 17:40:26 2011] Updating aperture counts using extracted products
[Wed Oct  5 17:40:26 2011] Error reading totcts from fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct  5 17:40:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:40:26 2011] Using photon index=1.80, rate=0.00791, arf fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2.arf
[Wed Oct  5 17:40:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:40:26 2011] Updating source flux to 6e-14
[Wed Oct  5 17:40:51 2011] Reading fit data from acisf10540/analysis//spectral/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_pl.csv
[Wed Oct  5 17:40:51 2011] Spectral fit parameter nH value = 1.81611e+21
[Wed Oct  5 17:40:51 2011] Spectral fit parameter PhoIndex value = 1.59322
[Wed Oct  5 17:40:51 2011] Failed to get F(0.3-8.0) from acisf10540/analysis//spectral/fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 17:40:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:40:51 2011] Using Nh = 1.8e+21, photon index=1.59, rate=0.00791, arf fullrun_ccd7_acisf10540_pi14-548_pass1_cl_src2.arf
[Wed Oct  5 17:40:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:40:51 2011] Updating source flux to 7.2e-14