[Wed Oct  5 17:33:35 2011] Detection parameters:
  Position = (390.7, 923.9) = 11 49 21.67 -27 18 2.0
  Extent = 3.6" x 2.5", rotation angle = 112 degrees
  Source counts = 31.1 +/- 6.9
  Background counts = 16.9
  Rate = 0.0008 +/- 0.0002

[Wed Oct  5 17:33:37 2011] Off-axis axis estimate = 8.89'
[Wed Oct  5 17:34:37 2011] Using EEF radius (= 3.49 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:34:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 17:34:37 2011] Initial guess for spatial extent in simple fitting = 3.49"
[Wed Oct  5 17:34:37 2011] source mask rpix=7.1, npix_max = 230, mask sum = 225, frac = 0.976
[Wed Oct  5 17:34:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.49"
[Wed Oct  5 17:34:38 2011] fullrun_ccd6_acisf10540_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct  5 17:34:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10540_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 17:34:38 2011] fullrun_ccd6_acisf10540_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct  5 17:34:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10540_pi14-548_cl_pass0_src1.csv
[Wed Oct  5 17:34:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10540_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10540_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:34:38 2011] fullrun_ccd6_acisf10540_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 17:34:38 2011] fullrun_ccd6_acisf10540_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 17:34:38 2011] Fit fullrun_ccd6_acisf10540_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 17:34:50 2011] Spatial fit model total counts = 82.128300, observed total counts = 82.000000
[Wed Oct  5 17:34:50 2011] Offset between fit and detection position for source 1 = 7.003664 pixels
[Wed Oct  5 17:34:50 2011] 81.783500 total counts/ 32.961900 bgd. counts: snr = 8.503660
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.003664 pixels
  Position = (396.5, 927.9) = 11 49 21.47 -27 18 0.3
  Extent = 4.3 (3.3-6.0)", rotation angle = 0
  Source counts = 48.8 +/- 9.0
  Background counts = 33.0
  Rate = 0.001 +/- 0.0002
[Wed Oct  5 17:34:50 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:34:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:34:50 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:34:50 2011] Source does appear to be extended
[Wed Oct  5 17:34:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:35:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 17:35:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 17:35:11 2011] Initial guess for spatial extent in simple fitting = 4.32"
[Wed Oct  5 17:35:11 2011] source mask rpix=8.8, npix_max = 345, mask sum = 342, frac = 0.991
[Wed Oct  5 17:35:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.32"
[Wed Oct  5 17:35:11 2011] fullrun_ccd6_acisf10540_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct  5 17:35:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10540_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 17:35:11 2011] fullrun_ccd6_acisf10540_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct  5 17:35:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10540_pi14-548_cl_pass1_src1.csv
[Wed Oct  5 17:35:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10540_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10540_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:35:11 2011] fullrun_ccd6_acisf10540_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 17:35:11 2011] fullrun_ccd6_acisf10540_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 17:35:11 2011] Fit fullrun_ccd6_acisf10540_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 17:35:20 2011] Spatial fit model total counts = 106.396000, observed total counts = 106.000000
[Wed Oct  5 17:35:20 2011] Offset between fit and detection position for source 1 = 0.329364 pixels
[Wed Oct  5 17:35:20 2011] 106.165400 total counts/ 62.635400 bgd. counts: snr = 5.500203
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.329364 pixels
  Position = (396.3, 927.6) = 11 49 21.48 -27 18 0.4
  Extent = 4.1 (3.2-5.3)", rotation angle = 0
  Source counts = 43.5 +/- 10.3
  Background counts = 62.6
  Rate = 0.001 +/- 0.0003
[Wed Oct  5 17:35:20 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:35:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:35:20 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:35:20 2011] Source does appear to be extended
[Wed Oct  5 17:35:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:37:10 2011] Not overwriting source region fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 17:37:10 2011] Extracting stamp from image fullrun_ccd6_acisf10540_pi14-548_cl_sm2.00.img.gz, (210, 741) - (582, 1114)
[Wed Oct  5 17:37:10 2011] Writing fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 17:37:11 2011] ../../acisf10540/products/events/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_src.evt and ../../acisf10540/products/events/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 17:37:11 2011] Size of ../../acisf10540/products/events/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_src.evt.gz[events] = 80 counts
[Wed Oct  5 17:37:11 2011] Mean chipx,y = (153.85, 431.66)
[Wed Oct  5 17:37:11 2011] Mean tdetx,y = (3028.85, 2133.66)
[Wed Oct  5 17:37:11 2011] chipx,y range = (107.00-180.00, 394.00-476.00)
[Wed Oct  5 17:37:11 2011] Size of ../../acisf10540/products/events/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 578 counts
[Wed Oct  5 17:37:11 2011] ../../acisf10540/products/images/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_src.img and ../../acisf10540/products/images/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 17:37:11 2011] ../../acisf10540/products/spectra/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_src.pi and ../../acisf10540/products/spectra/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct  5 17:37:11 2011] Not generating rmf since there are only 43 counts
[Wed Oct  5 17:37:18 2011] ../../acisf10540/products/lightcurves/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_src.lc and ../../acisf10540/products/lightcurves/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 17:39:04 2011] 171.606
[Wed Oct  5 17:40:26 2011] Updating aperture counts using extracted products
[Wed Oct  5 17:40:26 2011] Error reading totcts from fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 17:40:26 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 17:40:26 2011] Using photon index=1.80, rate=0.00119, arf fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 17:40:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 17:40:26 2011] Updating source flux to 1.4e-14
[Wed Oct  5 17:40:44 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 17:40:45 2011] acisf10540/analysis//spectral/fullrun_ccd6_acisf10540_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete