[Sat Oct 29 18:49:25 2011] Detection parameters:
  Position = (672.2, 719.4) = 4 8 40.34 -20 51 57.7
  Extent = 5.1" x 5.0", rotation angle = 124 degrees
  Source counts = 1066.5 +/- 36.7
  Background counts = 283.5
  Rate = 0.02 +/- 0.0007

[Sat Oct 29 18:49:26 2011] Off-axis axis estimate = 12.28'
[Sat Oct 29 18:50:30 2011] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:50:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 18:50:30 2011] Initial guess for spatial extent in simple fitting = 6.74"
[Sat Oct 29 18:50:30 2011] source mask rpix=13.7, npix_max = 807, mask sum = 812, frac = 1.006
[Sat Oct 29 18:50:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.74"
[Sat Oct 29 18:50:30 2011] fullrun_ccd2_acisf10539_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 18:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10539_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 18:50:30 2011] fullrun_ccd2_acisf10539_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 18:50:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10539_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 18:50:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10539_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10539_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:50:31 2011] fullrun_ccd2_acisf10539_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 18:50:31 2011] fullrun_ccd2_acisf10539_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 18:50:31 2011] Fit fullrun_ccd2_acisf10539_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 18:50:41 2011] Spatial fit model total counts = 1516.330000, observed total counts = 1518.000000
[Sat Oct 29 18:50:41 2011] Offset between fit and detection position for source 1 = 0.923981 pixels
[Sat Oct 29 18:50:41 2011] 1516.115000 total counts/ 272.895000 bgd. counts: snr = 75.257571
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.923981 pixels
  Position = (673.1, 719.7) = 4 8 40.33 -20 51 57.8
  Extent = 6.4 (6.2-6.8)", rotation angle = 0
  Source counts = 1243.2 +/- 38.9
  Background counts = 272.9
  Rate = 0.03 +/- 0.0008
[Sat Oct 29 18:50:41 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:50:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:50:41 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:50:41 2011] Source does appear to be extended
[Sat Oct 29 18:50:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:51:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:51:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 18:51:08 2011] Initial guess for spatial extent in simple fitting = 6.45"
[Sat Oct 29 18:51:08 2011] source mask rpix=13.1, npix_max = 740, mask sum = 756, frac = 1.021
[Sat Oct 29 18:51:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.45"
[Sat Oct 29 18:51:08 2011] fullrun_ccd2_acisf10539_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 18:51:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10539_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 18:51:08 2011] fullrun_ccd2_acisf10539_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 18:51:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10539_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 18:51:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10539_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10539_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:51:08 2011] fullrun_ccd2_acisf10539_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 18:51:08 2011] fullrun_ccd2_acisf10539_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 18:51:08 2011] Fit fullrun_ccd2_acisf10539_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 18:51:18 2011] Spatial fit model total counts = 1495.860000, observed total counts = 1498.000000
[Sat Oct 29 18:51:18 2011] Offset between fit and detection position for source 1 = 0.084789 pixels
[Sat Oct 29 18:51:18 2011] 1496.045000 total counts/ 257.085000 bgd. counts: snr = 77.271424
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.084789 pixels
  Position = (673.0, 719.7) = 4 8 40.33 -20 51 57.8
  Extent = 6.4 (6.2-6.7)", rotation angle = 0
  Source counts = 1239.0 +/- 38.7
  Background counts = 257.1
  Rate = 0.03 +/- 0.0008
[Sat Oct 29 18:51:18 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:51:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:51:18 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:51:18 2011] Source does appear to be extended
[Sat Oct 29 18:51:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:51:43 2011] Not overwriting source region fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 29 18:51:43 2011] Extracting stamp from image fullrun_ccd2_acisf10539_pi14-548_cl_sm2.00.img.gz, (379, 426) - (967, 1014)
[Sat Oct 29 18:51:43 2011] Writing fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1.gif
[Sat Oct 29 18:51:44 2011] ../../acisf10539/products/events/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_src.evt and ../../acisf10539/products/events/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 29 18:51:44 2011] Size of ../../acisf10539/products/events/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1439 counts
[Sat Oct 29 18:51:44 2011] Mean chipx,y = (474.99, 546.34)
[Sat Oct 29 18:51:44 2011] Mean tdetx,y = (3607.34, 3611.01)
[Sat Oct 29 18:51:44 2011] chipx,y range = (416.00-540.00, 482.00-607.00)
[Sat Oct 29 18:51:44 2011] Size of ../../acisf10539/products/events/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1718 counts
[Sat Oct 29 18:51:44 2011] ../../acisf10539/products/images/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_src.img and ../../acisf10539/products/images/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 29 18:51:44 2011] ../../acisf10539/products/spectra/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_src.pi and ../../acisf10539/products/spectra/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 29 18:51:47 2011] ../../acisf10539/products/lightcurves/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_src.lc and ../../acisf10539/products/lightcurves/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 29 18:52:10 2011] Keeping rmf generated by specextract
[Sat Oct 29 18:52:10 2011] 153.018
[Sat Oct 29 18:55:30 2011] Updating aperture counts using extracted products
[Sat Oct 29 18:55:30 2011] Error reading totcts from fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 29 18:55:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:55:30 2011] Using photon index=1.80, rate=0.0251, arf fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1.arf
[Sat Oct 29 18:55:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:55:30 2011] Updating source flux to 3.6e-13
[Sat Oct 29 18:55:38 2011] Reading fit data from acisf10539/analysis//spectral/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 29 18:55:38 2011] Spectral fit parameter nH value = 1.51631e+19
[Sat Oct 29 18:55:38 2011] Spectral fit parameter PhoIndex value = 1.80611
[Sat Oct 29 18:55:38 2011] Failed to get F(0.3-8.0) from acisf10539/analysis//spectral/fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 18:55:38 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:55:38 2011] Using Nh = 1.5e+19, photon index=1.81, rate=0.0251, arf fullrun_ccd2_acisf10539_pi14-548_pass1_cl_src1.arf
[Sat Oct 29 18:55:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:55:38 2011] Updating source flux to 3.7e-13