[Sat Oct 22 04:37:03 2011] Detection parameters:
  Position = (336.7, 288.0) = 2 49 55.77 -31 7 29.2
  Extent = 0.7" x 0.5", rotation angle = 160 degrees
  Source counts = 10.0 +/- 3.3
  Background counts = 1.0
  Rate = 0.0003 +/- 9e-05

[Sat Oct 22 04:37:04 2011] Off-axis axis estimate = 5.20'
[Sat Oct 22 04:38:08 2011] Using EEF radius (= 1.26 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 04:38:08 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Sat Oct 22 04:38:08 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Sat Oct 22 04:38:08 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 1.26"
[Sat Oct 22 04:38:09 2011] fullrun_ccd6_acisf10537_pi14-548_cl_pass0_src8.ximg exists
[Sat Oct 22 04:38:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10537_pi14-548_cl_pass0_src8.csv
[Sat Oct 22 04:38:09 2011] fullrun_ccd6_acisf10537_pi14-548_cl_pass0_src8_1.ximg exists
[Sat Oct 22 04:38:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10537_pi14-548_cl_pass0_src8.csv
[Sat Oct 22 04:38:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10537_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10537_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 04:38:09 2011] fullrun_ccd6_acisf10537_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sat Oct 22 04:38:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10537_pi14-548_cl_pass0_tfrozen_src8.csv
[Sat Oct 22 04:38:09 2011] fullrun_ccd6_acisf10537_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Oct 22 04:38:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10537_pi14-548_cl_pass0_tfrozen_src8.csv
[Sat Oct 22 04:38:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10537_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10537_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 04:38:15 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.743516 pixels away
[Sat Oct 22 04:38:15 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 04:38:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 04:38:15 2011] Assessing source extent using major
[Sat Oct 22 04:38:15 2011] Source does appear to be extended
[Sat Oct 22 04:38:15 2011] Computing asymmetry using major and minor axis, asym = 1.43
[Sat Oct 22 04:38:15 2011] Deleting source due to low Poisson probability 0.9