[Sat Oct 22 04:37:02 2011] Detection parameters:
  Position = (866.2, 367.6) = 2 50 22.37 -31 11 39.9
  Extent = 2.0" x 1.5", rotation angle = 34 degrees
  Source counts = 17.4 +/- 5.3
  Background counts = 10.6
  Rate = 0.0005 +/- 0.0001

[Sat Oct 22 04:37:02 2011] Off-axis axis estimate = 10.29'
[Sat Oct 22 04:38:07 2011] Using EEF radius (= 4.70 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 04:38:07 2011] Initial guess for spatial extent in simple fitting = 4.70"
[Sat Oct 22 04:38:07 2011] source mask rpix=9.5, npix_max = 403, mask sum = 392, frac = 0.970
[Sat Oct 22 04:38:07 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.70"
[Sat Oct 22 04:38:07 2011] fullrun_ccd2_acisf10537_pi14-548_cl_pass0_src3.ximg exists
[Sat Oct 22 04:38:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10537_pi14-548_cl_pass0_src3.csv
[Sat Oct 22 04:38:07 2011] fullrun_ccd2_acisf10537_pi14-548_cl_pass0_src3_1.ximg exists
[Sat Oct 22 04:38:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10537_pi14-548_cl_pass0_src3.csv
[Sat Oct 22 04:38:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10537_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10537_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 04:38:07 2011] fullrun_ccd2_acisf10537_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sat Oct 22 04:38:07 2011] fullrun_ccd2_acisf10537_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Oct 22 04:38:07 2011] Fit fullrun_ccd2_acisf10537_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Oct 22 04:38:14 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 53.897036 pixels away
[Sat Oct 22 04:38:14 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 04:38:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 04:38:14 2011] Assessing source extent using major
[Sat Oct 22 04:38:14 2011] Source does appear to be extended
[Sat Oct 22 04:38:14 2011] Computing asymmetry using major and minor axis, asym = 1.36
[Sat Oct 22 04:38:31 2011] Using EEF radius (= 4.70 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 04:38:31 2011] Initial guess for spatial extent in simple fitting = 4.70"
[Sat Oct 22 04:38:31 2011] source mask rpix=9.5, npix_max = 403, mask sum = 392, frac = 0.970
[Sat Oct 22 04:38:31 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.70"
[Sat Oct 22 04:38:31 2011] fullrun_ccd2_acisf10537_pi14-548_cl_pass1_src3.ximg exists
[Sat Oct 22 04:38:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10537_pi14-548_cl_pass1_src3.csv
[Sat Oct 22 04:38:31 2011] fullrun_ccd2_acisf10537_pi14-548_cl_pass1_src3_1.ximg exists
[Sat Oct 22 04:38:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10537_pi14-548_cl_pass1_src3.csv
[Sat Oct 22 04:38:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10537_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10537_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 04:38:32 2011] fullrun_ccd2_acisf10537_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sat Oct 22 04:38:32 2011] fullrun_ccd2_acisf10537_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Oct 22 04:38:33 2011] Fit fullrun_ccd2_acisf10537_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Oct 22 04:38:38 2011] Spatial fit model total counts = 86.758400, observed total counts = 87.000000
[Sat Oct 22 04:38:38 2011] Offset between fit and detection position for source 3 = 7.437449 pixels
[Sat Oct 22 04:38:38 2011] 86.838200 total counts/ 38.600600 bgd. counts: snr = 7.764056
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 7.437449 pixels
  Position = (858.9, 366.5) = 2 50 22.67 -31 11 40.7
  Extent = 4.8 (2.8-6.8)", rotation angle = 0
  Source counts = 48.2 +/- 9.3
  Background counts = 38.6
  Rate = 0.001 +/- 0.0003
[Sat Oct 22 04:38:38 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 04:38:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 04:38:38 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 04:38:38 2011] Source does appear to be extended
[Sat Oct 22 04:38:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 04:38:54 2011] Not overwriting source region fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 22 04:38:54 2011] Extracting stamp from image fullrun_ccd2_acisf10537_pi14-548_cl_sm2.00.img.gz, (639, 146) - (1079, 587)
[Sat Oct 22 04:38:54 2011] Writing fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3.gif
[Sat Oct 22 04:38:57 2011] ../../acisf10537/products/events/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_src.evt and ../../acisf10537/products/events/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Oct 22 04:38:57 2011] Size of ../../acisf10537/products/events/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_src.evt.gz[events] = 116 counts
[Sat Oct 22 04:38:57 2011] Mean chipx,y = (633.68, 846.03)
[Sat Oct 22 04:38:57 2011] Mean tdetx,y = (3907.03, 3452.32)
[Sat Oct 22 04:38:57 2011] chipx,y range = (589.00-684.00, 792.00-885.00)
[Sat Oct 22 04:38:57 2011] Size of ../../acisf10537/products/events/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 774 counts
[Sat Oct 22 04:38:57 2011] ../../acisf10537/products/images/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_src.img and ../../acisf10537/products/images/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Oct 22 04:38:57 2011] ../../acisf10537/products/spectra/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_src.pi and ../../acisf10537/products/spectra/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Oct 22 04:38:57 2011] Not generating rmf since there are only 48 counts
[Sat Oct 22 04:38:59 2011] ../../acisf10537/products/lightcurves/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_src.lc and ../../acisf10537/products/lightcurves/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Oct 22 04:39:05 2011] 156.72
[Sat Oct 22 04:40:19 2011] Updating aperture counts using extracted products
[Sat Oct 22 04:40:19 2011] Error reading totcts from fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 22 04:40:19 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 22 04:40:19 2011] Using photon index=1.80, rate=0.00129, arf fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3.arf
[Sat Oct 22 04:40:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 22 04:40:19 2011] Updating source flux to 1.8e-14
[Sat Oct 22 04:40:21 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 04:40:22 2011] acisf10537/analysis//spectral/fullrun_ccd2_acisf10537_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete