[Sun Oct 23 06:45:29 2011] Detection parameters:
  Position = (1049.5, 552.8) = 12 14 48.85 33 23 12.6
  Extent = 1.8" x 1.6", rotation angle = 82 degrees
  Source counts = 78.5 +/- 10.7
  Background counts = 35.5
  Rate = 0.002 +/- 0.0003

[Sun Oct 23 06:45:29 2011] Off-axis axis estimate = 11.19'
[Sun Oct 23 06:46:29 2011] Using EEF radius (= 5.57 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 06:46:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 06:46:29 2011] Initial guess for spatial extent in simple fitting = 5.57"
[Sun Oct 23 06:46:29 2011] source mask rpix=11.3, npix_max = 559, mask sum = 538, frac = 0.961
[Sun Oct 23 06:46:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.57"
[Sun Oct 23 06:46:30 2011] fullrun_ccd2_acisf10535_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 06:46:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10535_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 06:46:30 2011] fullrun_ccd2_acisf10535_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 06:46:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10535_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 06:46:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10535_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10535_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 06:46:30 2011] fullrun_ccd2_acisf10535_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 06:46:30 2011] fullrun_ccd2_acisf10535_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 06:46:30 2011] Fit fullrun_ccd2_acisf10535_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 06:46:38 2011] Spatial fit model total counts = 254.933000, observed total counts = 253.000000
[Sun Oct 23 06:46:38 2011] Offset between fit and detection position for source 1 = 1.478115 pixels
[Sun Oct 23 06:46:38 2011] 255.404600 total counts/ 157.736000 bgd. counts: snr = 7.776596
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.478115 pixels
  Position = (1050.6, 553.8) = 12 14 48.82 33 23 12.9
  Extent = 4.2 (3.2-5.4)", rotation angle = 0
  Source counts = 97.7 +/- 16.0
  Background counts = 157.7
  Rate = 0.002 +/- 0.0004
[Sun Oct 23 06:46:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 06:46:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 06:46:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 06:46:38 2011] Source does appear to be extended
[Sun Oct 23 06:46:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 06:47:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 06:47:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 06:47:04 2011] Initial guess for spatial extent in simple fitting = 4.19"
[Sun Oct 23 06:47:04 2011] source mask rpix=8.5, npix_max = 324, mask sum = 324, frac = 0.998
[Sun Oct 23 06:47:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.19"
[Sun Oct 23 06:47:05 2011] fullrun_ccd2_acisf10535_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 06:47:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10535_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 06:47:05 2011] fullrun_ccd2_acisf10535_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 06:47:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10535_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 06:47:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10535_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10535_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 06:47:05 2011] fullrun_ccd2_acisf10535_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 06:47:05 2011] fullrun_ccd2_acisf10535_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 06:47:05 2011] Fit fullrun_ccd2_acisf10535_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 06:47:14 2011] Spatial fit model total counts = 189.321000, observed total counts = 187.000000
[Sun Oct 23 06:47:14 2011] Offset between fit and detection position for source 1 = 0.665996 pixels
[Sun Oct 23 06:47:14 2011] 189.789400 total counts/ 103.363000 bgd. counts: snr = 8.500880
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.665996 pixels
  Position = (1049.9, 553.9) = 12 14 48.85 33 23 12.9
  Extent = 3.7 (2.6-5.1)", rotation angle = 0
  Source counts = 86.4 +/- 13.8
  Background counts = 103.4
  Rate = 0.002 +/- 0.0003
[Sun Oct 23 06:47:14 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 06:47:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 06:47:14 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 06:47:14 2011] Source does appear to be extended
[Sun Oct 23 06:47:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 06:47:36 2011] Not overwriting source region fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 06:47:36 2011] Extracting stamp from image fullrun_ccd2_acisf10535_pi14-548_cl_sm2.00.img.gz, (880, 384) - (1219, 723)
[Sun Oct 23 06:47:36 2011] Writing fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 06:47:37 2011] ../../acisf10535/products/events/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_src.evt and ../../acisf10535/products/events/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 23 06:47:37 2011] Size of ../../acisf10535/products/events/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_src.evt.gz[events] = 153 counts
[Sun Oct 23 06:47:37 2011] Mean chipx,y = (783.79, 231.46)
[Sun Oct 23 06:47:37 2011] Mean tdetx,y = (3292.46, 3302.21)
[Sun Oct 23 06:47:37 2011] chipx,y range = (741.00-823.00, 191.00-274.00)
[Sun Oct 23 06:47:37 2011] Size of ../../acisf10535/products/events/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 467 counts
[Sun Oct 23 06:47:37 2011] ../../acisf10535/products/images/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_src.img and ../../acisf10535/products/images/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 23 06:47:37 2011] Not generating rmf since there are only 86 counts
[Sun Oct 23 06:47:37 2011] arf not found, will run specextract
[Sun Oct 23 06:47:59 2011] ../../acisf10535/products/spectra/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1.warf not found
[Sun Oct 23 06:47:59 2011] ../../acisf10535/products/spectra/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1.wrmf not found
[Sun Oct 23 06:47:59 2011] Removal of ../../acisf10535/products/spectra/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1.soff failed
[Sun Oct 23 06:48:05 2011] ../../acisf10535/products/lightcurves/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_src.lc and ../../acisf10535/products/lightcurves/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 23 06:50:27 2011] Spectrum 1 has only 86 counts, deleting rmf
[Sun Oct 23 06:50:27 2011] 144.41
[Sun Oct 23 07:06:57 2011] Updating aperture counts using extracted products
[Sun Oct 23 07:06:57 2011] Error reading totcts from fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 07:06:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 07:06:57 2011] Using photon index=1.80, rate=0.00208, arf fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 07:06:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 07:06:57 2011] Updating source flux to 3.4e-14
[Sun Oct 23 07:07:00 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 07:07:03 2011] acisf10535/analysis//spectral/fullrun_ccd2_acisf10535_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete