[Sun Oct  2 09:30:56 2011] Detection parameters:
  Position = (466.6, 1123.4) = 10 47 56.11 51 1 34.0
  Extent = 2.5" x 1.3", rotation angle = 126 degrees
  Source counts = 19.2 +/- 7.9
  Background counts = 43.8
  Rate = 0.0002 +/- 8e-05

[Sun Oct  2 09:30:56 2011] Off-axis axis estimate = 13.04'
[Sun Oct  2 09:32:53 2011] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:32:53 2011] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Oct  2 09:32:53 2011] source mask rpix=15.5, npix_max = 1025, mask sum = 921, frac = 0.898
[Sun Oct  2 09:32:53 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.63"
[Sun Oct  2 09:32:53 2011] fullrun_ccd6_acisf10534_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct  2 09:32:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10534_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 09:32:53 2011] fullrun_ccd6_acisf10534_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct  2 09:32:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10534_pi14-548_cl_pass0_src3.csv
[Sun Oct  2 09:32:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10534_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10534_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:32:54 2011] fullrun_ccd6_acisf10534_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct  2 09:32:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10534_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Oct  2 09:32:54 2011] fullrun_ccd6_acisf10534_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct  2 09:32:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10534_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Oct  2 09:32:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10534_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10534_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:33:14 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 66.513867 pixels away
[Sun Oct  2 09:33:14 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 87.632377 pixels away
[Sun Oct  2 09:33:14 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:33:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:33:14 2011] Assessing source extent using major
[Sun Oct  2 09:33:14 2011] Source does appear to be extended
[Sun Oct  2 09:33:14 2011] Computing asymmetry using major and minor axis, asym = 1.89
[Sun Oct  2 09:33:14 2011] Source is asymmetric
[Sun Oct  2 09:33:14 2011] Deleting source due to low Poisson probability 0.8