[Sun Oct  2 09:30:55 2011] Detection parameters:
  Position = (674.8, 1073.4) = 10 49 20.84 51 0 41.2
  Extent = 0.6" x 0.5", rotation angle = 123 degrees
  Source counts = 25.4 +/- 5.2
  Background counts = 1.6
  Rate = 0.0003 +/- 5e-05

[Sun Oct  2 09:30:56 2011] Off-axis axis estimate = 2.61'
[Sun Oct  2 09:32:51 2011] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:32:51 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Sun Oct  2 09:32:51 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.954
[Sun Oct  2 09:32:51 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.51"
[Sun Oct  2 09:32:52 2011] fullrun_ccd3_acisf10534_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct  2 09:32:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10534_pi14-548_cl_pass0_src10.csv
[Sun Oct  2 09:32:52 2011] fullrun_ccd3_acisf10534_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct  2 09:32:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10534_pi14-548_cl_pass0_src10.csv
[Sun Oct  2 09:32:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10534_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10534_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:32:52 2011] fullrun_ccd3_acisf10534_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct  2 09:32:52 2011] fullrun_ccd3_acisf10534_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct  2 09:32:52 2011] Fit fullrun_ccd3_acisf10534_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct  2 09:33:13 2011] Spatial fit model total counts = 30.046600, observed total counts = 30.000000
[Sun Oct  2 09:33:13 2011] Offset between fit and detection position for source 7 = 0.827564 pixels
[Sun Oct  2 09:33:13 2011] 29.648050 total counts/ 4.957350 bgd. counts: snr = 11.089414
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.827564 pixels
  Position = (675.1, 1074.2) = 10 49 20.85 51 0 41.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 24.7 +/- 5.4
  Background counts = 5.0
  Rate = 0.0002 +/- 5e-05
[Sun Oct  2 09:33:13 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:33:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:33:13 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:33:13 2011] Source does appear to be extended
[Sun Oct  2 09:33:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:34:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:34:00 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Oct  2 09:34:00 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.579
[Sun Oct  2 09:34:00 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.40"
[Sun Oct  2 09:34:00 2011] fullrun_ccd3_acisf10534_pi14-548_cl_pass1_src10.ximg exists
[Sun Oct  2 09:34:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10534_pi14-548_cl_pass1_src10.csv
[Sun Oct  2 09:34:00 2011] fullrun_ccd3_acisf10534_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Oct  2 09:34:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10534_pi14-548_cl_pass1_src10.csv
[Sun Oct  2 09:34:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10534_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10534_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:34:01 2011] fullrun_ccd3_acisf10534_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Oct  2 09:34:01 2011] fullrun_ccd3_acisf10534_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Oct  2 09:34:01 2011] Fit fullrun_ccd3_acisf10534_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Oct  2 09:34:24 2011] Spatial fit model total counts = 29.966100, observed total counts = 30.000000
[Sun Oct  2 09:34:24 2011] Offset between fit and detection position for source 7 = 0.006411 pixels
[Sun Oct  2 09:34:24 2011] 29.236900 total counts/ 4.097700 bgd. counts: snr = 12.418850
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.006411 pixels
  Position = (675.1, 1074.2) = 10 49 20.85 51 0 41.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 25.1 +/- 5.4
  Background counts = 4.1
  Rate = 0.0002 +/- 5e-05
[Sun Oct  2 09:34:24 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:34:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:34:24 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:34:24 2011] Source does appear to be extended
[Sun Oct  2 09:34:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:44:19 2011] Not overwriting source region fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_src.reg
[Sun Oct  2 09:44:19 2011] Extracting stamp from image fullrun_ccd3_acisf10534_pi14-548_cl_sm2.00.img.gz, (656, 1055) - (694, 1093)
[Sun Oct  2 09:44:19 2011] Writing fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7.gif
[Sun Oct  2 09:44:55 2011] ../../acisf10534/products/events/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_src.evt and ../../acisf10534/products/events/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun Oct  2 09:44:55 2011] Size of ../../acisf10534/products/events/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_src.evt.gz[events] = 25 counts
[Sun Oct  2 09:44:55 2011] Mean chipx,y = (786.72, 759.64)
[Sun Oct  2 09:44:55 2011] Mean tdetx,y = (4372.36, 3847.72)
[Sun Oct  2 09:44:55 2011] chipx,y range = (770.00-803.00, 738.00-771.00)
[Sun Oct  2 09:44:55 2011] Size of ../../acisf10534/products/events/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 9 counts
[Sun Oct  2 09:44:55 2011] ../../acisf10534/products/images/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_src.img and ../../acisf10534/products/images/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun Oct  2 09:44:55 2011] ../../acisf10534/products/spectra/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_src.pi and ../../acisf10534/products/spectra/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sun Oct  2 09:44:55 2011] Not generating rmf since there are only 25 counts
[Sun Oct  2 09:44:59 2011] ../../acisf10534/products/lightcurves/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_src.lc and ../../acisf10534/products/lightcurves/fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun Oct  2 09:45:46 2011] 191.758
[Sun Oct  2 09:46:19 2011] Updating aperture counts using extracted products
[Sun Oct  2 09:46:19 2011] Error reading totcts from fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7_src.pi.gz
[Sun Oct  2 09:46:19 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 09:46:19 2011] Using photon index=1.80, rate=0.000248, arf fullrun_ccd3_acisf10534_pi14-548_pass1_cl_src7.arf
[Sun Oct  2 09:46:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 09:46:19 2011] Updating source flux to 3.1e-15
[Sun Oct  2 09:47:13 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting