[Sun Oct  2 09:30:48 2011] Detection parameters:
  Position = (915.4, 896.7) = 10 49 49.37 51 4 46.6
  Extent = 0.9" x 0.7", rotation angle = 147 degrees
  Source counts = 47.8 +/- 7.2
  Background counts = 4.2
  Rate = 0.0005 +/- 7e-05

[Sun Oct  2 09:30:50 2011] Off-axis axis estimate = 5.10'
[Sun Oct  2 09:32:46 2011] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:32:46 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Sun Oct  2 09:32:46 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014
[Sun Oct  2 09:32:46 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 1.22"
[Sun Oct  2 09:32:47 2011] fullrun_ccd1_acisf10534_pi14-548_cl_pass0_src16.ximg exists
[Sun Oct  2 09:32:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10534_pi14-548_cl_pass0_src16.csv
[Sun Oct  2 09:32:47 2011] fullrun_ccd1_acisf10534_pi14-548_cl_pass0_src16_1.ximg exists
[Sun Oct  2 09:32:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10534_pi14-548_cl_pass0_src16.csv
[Sun Oct  2 09:32:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10534_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10534_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:32:48 2011] fullrun_ccd1_acisf10534_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Sun Oct  2 09:32:48 2011] fullrun_ccd1_acisf10534_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Oct  2 09:32:48 2011] Fit fullrun_ccd1_acisf10534_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Oct  2 09:33:07 2011] Spatial fit model total counts = 55.999700, observed total counts = 56.000000
[Sun Oct  2 09:33:07 2011] Offset between fit and detection position for source 20 = 0.940370 pixels
[Sun Oct  2 09:33:07 2011] 55.647400 total counts/ 12.802500 bgd. counts: snr = 11.974344
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.940370 pixels
  Position = (916.2, 897.0) = 10 49 49.35 51 4 46.5
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 42.8 +/- 7.5
  Background counts = 12.8
  Rate = 0.0004 +/- 7e-05
[Sun Oct  2 09:33:07 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:33:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:33:07 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:33:07 2011] Source does appear to be extended
[Sun Oct  2 09:33:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:33:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:33:48 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Sun Oct  2 09:33:48 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Sun Oct  2 09:33:48 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.84"
[Sun Oct  2 09:33:57 2011] fullrun_ccd1_acisf10534_pi14-548_cl_pass1_src16.ximg exists
[Sun Oct  2 09:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10534_pi14-548_cl_pass1_src16.csv
[Sun Oct  2 09:33:57 2011] fullrun_ccd1_acisf10534_pi14-548_cl_pass1_src16_1.ximg exists
[Sun Oct  2 09:33:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10534_pi14-548_cl_pass1_src16.csv
[Sun Oct  2 09:33:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10534_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10534_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:33:58 2011] fullrun_ccd1_acisf10534_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sun Oct  2 09:33:58 2011] fullrun_ccd1_acisf10534_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Oct  2 09:33:58 2011] Fit fullrun_ccd1_acisf10534_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Oct  2 09:34:18 2011] Spatial fit model total counts = 54.999500, observed total counts = 55.000000
[Sun Oct  2 09:34:18 2011] Offset between fit and detection position for source 20 = 0.036595 pixels
[Sun Oct  2 09:34:18 2011] 54.525600 total counts/ 10.885700 bgd. counts: snr = 13.226824
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.036595 pixels
  Position = (916.3, 897.0) = 10 49 49.35 51 4 46.5
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 43.6 +/- 7.4
  Background counts = 10.9
  Rate = 0.0004 +/- 7e-05
[Sun Oct  2 09:34:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:34:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:34:18 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:34:18 2011] Source does appear to be extended
[Sun Oct  2 09:34:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:36:36 2011] Not overwriting source region fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_src.reg
[Sun Oct  2 09:36:36 2011] Extracting stamp from image fullrun_ccd1_acisf10534_pi14-548_cl_sm2.00.img.gz, (877, 858) - (956, 936)
[Sun Oct  2 09:36:36 2011] Writing fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20.gif
[Sun Oct  2 09:37:50 2011] ../../acisf10534/products/events/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_src.evt and ../../acisf10534/products/events/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sun Oct  2 09:37:50 2011] Size of ../../acisf10534/products/events/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_src.evt.gz[events] = 50 counts
[Sun Oct  2 09:37:50 2011] Mean chipx,y = (476.94, 783.92)
[Sun Oct  2 09:37:50 2011] Mean tdetx,y = (4348.08, 4583.94)
[Sun Oct  2 09:37:50 2011] chipx,y range = (460.00-498.00, 765.00-802.00)
[Sun Oct  2 09:37:50 2011] Size of ../../acisf10534/products/events/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 42 counts
[Sun Oct  2 09:37:50 2011] ../../acisf10534/products/images/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_src.img and ../../acisf10534/products/images/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sun Oct  2 09:37:50 2011] ../../acisf10534/products/spectra/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_src.pi and ../../acisf10534/products/spectra/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sun Oct  2 09:37:50 2011] Not generating rmf since there are only 43 counts
[Sun Oct  2 09:37:55 2011] ../../acisf10534/products/lightcurves/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_src.lc and ../../acisf10534/products/lightcurves/fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sun Oct  2 09:41:02 2011] 190.336
[Sun Oct  2 09:46:17 2011] Updating aperture counts using extracted products
[Sun Oct  2 09:46:17 2011] Error reading totcts from fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20_src.pi.gz
[Sun Oct  2 09:46:18 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 09:46:18 2011] Using photon index=1.80, rate=0.00043, arf fullrun_ccd1_acisf10534_pi14-548_pass1_cl_src20.arf
[Sun Oct  2 09:46:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 09:46:18 2011] Updating source flux to 5.3e-15
[Sun Oct  2 09:46:39 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting