[Mon Oct  3 16:03:49 2011] Detection parameters:
  Position = (805.3, 847.5) = 5 40 12.68 69 19 39.5
  Extent = 1.8" x 1.3", rotation angle = 136 degrees
  Source counts = 86.2 +/- 9.7
  Background counts = 7.8
  Rate = 0.003 +/- 0.0003

[Mon Oct  3 16:03:51 2011] Off-axis axis estimate = 7.28'
[Mon Oct  3 16:05:13 2011] Using EEF radius (= 2.35 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 16:05:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 16:05:13 2011] Initial guess for spatial extent in simple fitting = 2.35"
[Mon Oct  3 16:05:13 2011] source mask rpix=4.8, npix_max = 111, mask sum = 121, frac = 1.085
[Mon Oct  3 16:05:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.35"
[Mon Oct  3 16:05:14 2011] fullrun_ccd1_acisf10531_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct  3 16:05:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10531_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 16:05:14 2011] fullrun_ccd1_acisf10531_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct  3 16:05:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10531_pi14-548_cl_pass0_src1.csv
[Mon Oct  3 16:05:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10531_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10531_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 16:05:14 2011] fullrun_ccd1_acisf10531_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct  3 16:05:14 2011] fullrun_ccd1_acisf10531_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct  3 16:05:14 2011] Fit fullrun_ccd1_acisf10531_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct  3 16:05:28 2011] Spatial fit model total counts = 102.899000, observed total counts = 102.000000
[Mon Oct  3 16:05:28 2011] Offset between fit and detection position for source 3 = 1.112688 pixels
[Mon Oct  3 16:05:28 2011] 102.910200 total counts/ 22.068700 bgd. counts: snr = 17.208618
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.112688 pixels
  Position = (805.4, 848.6) = 5 40 12.71 69 19 39.8
  Extent = 1.6 (1.3-1.9)", rotation angle = 0
  Source counts = 80.8 +/- 10.1
  Background counts = 22.1
  Rate = 0.002 +/- 0.0003
[Mon Oct  3 16:05:28 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 16:05:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 16:05:28 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 16:05:28 2011] Source does appear to be extended
[Mon Oct  3 16:05:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 16:05:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 16:05:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct  3 16:05:59 2011] Initial guess for spatial extent in simple fitting = 1.55"
[Mon Oct  3 16:05:59 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.918
[Mon Oct  3 16:05:59 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.55"
[Mon Oct  3 16:06:00 2011] fullrun_ccd1_acisf10531_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct  3 16:06:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10531_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 16:06:00 2011] fullrun_ccd1_acisf10531_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct  3 16:06:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10531_pi14-548_cl_pass1_src1.csv
[Mon Oct  3 16:06:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10531_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10531_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 16:06:00 2011] fullrun_ccd1_acisf10531_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct  3 16:06:00 2011] fullrun_ccd1_acisf10531_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct  3 16:06:00 2011] Fit fullrun_ccd1_acisf10531_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct  3 16:06:11 2011] Spatial fit model total counts = 92.990900, observed total counts = 93.000000
[Mon Oct  3 16:06:11 2011] Offset between fit and detection position for source 3 = 0.396449 pixels
[Mon Oct  3 16:06:11 2011] 92.968900 total counts/ 19.130900 bgd. counts: snr = 16.881546
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.396449 pixels
  Position = (805.1, 848.8) = 5 40 12.74 69 19 39.9
  Extent = 1.4 (1.1-1.7)", rotation angle = 0
  Source counts = 73.8 +/- 9.6
  Background counts = 19.1
  Rate = 0.002 +/- 0.0003
[Mon Oct  3 16:06:11 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 16:06:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 16:06:11 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 16:06:11 2011] Source does appear to be extended
[Mon Oct  3 16:06:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 16:07:51 2011] Not overwriting source region fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_src.reg
[Mon Oct  3 16:07:51 2011] Extracting stamp from image fullrun_ccd1_acisf10531_pi14-548_cl_sm2.00.img.gz, (740, 784) - (870, 914)
[Mon Oct  3 16:07:51 2011] Writing fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3.gif
[Mon Oct  3 16:07:53 2011] ../../acisf10531/products/events/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_src.evt and ../../acisf10531/products/events/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct  3 16:07:53 2011] Size of ../../acisf10531/products/events/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_src.evt.gz[events] = 88 counts
[Mon Oct  3 16:07:53 2011] Mean chipx,y = (489.12, 359.40)
[Mon Oct  3 16:07:53 2011] Mean tdetx,y = (4772.60, 4596.12)
[Mon Oct  3 16:07:53 2011] chipx,y range = (466.00-516.00, 340.00-381.00)
[Mon Oct  3 16:07:53 2011] Size of ../../acisf10531/products/events/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 63 counts
[Mon Oct  3 16:07:53 2011] ../../acisf10531/products/images/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_src.img and ../../acisf10531/products/images/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct  3 16:07:53 2011] ../../acisf10531/products/spectra/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_src.pi and ../../acisf10531/products/spectra/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Oct  3 16:07:53 2011] Not generating rmf since there are only 73 counts
[Mon Oct  3 16:07:55 2011] ../../acisf10531/products/lightcurves/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_src.lc and ../../acisf10531/products/lightcurves/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct  3 16:08:47 2011] 174.541
[Mon Oct  3 16:12:02 2011] Updating aperture counts using extracted products
[Mon Oct  3 16:12:02 2011] Error reading totcts from fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct  3 16:12:02 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 16:12:02 2011] Using photon index=1.80, rate=0.00225, arf fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3.arf
[Mon Oct  3 16:12:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 16:12:02 2011] Updating source flux to 2.9e-14
[Mon Oct  3 16:12:09 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct  3 16:12:10 2011] acisf10531/analysis//spectral/fullrun_ccd1_acisf10531_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete