[Sun Sep 25 08:14:21 2011] Detection parameters:
  Position = (567.7, 939.6) = 5 41 2.50 69 35 55.6
  Extent = 1.8" x 0.9", rotation angle = 28 degrees
  Source counts = 133.0 +/- 11.9
  Background counts = 8.0
  Rate = 0.004 +/- 0.0004

[Sun Sep 25 08:14:23 2011] Off-axis axis estimate = 7.27'
[Sun Sep 25 08:15:22 2011] Using EEF radius (= 2.34 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 08:15:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 08:15:22 2011] Initial guess for spatial extent in simple fitting = 2.34"
[Sun Sep 25 08:15:22 2011] source mask rpix=4.8, npix_max = 110, mask sum = 118, frac = 1.064
[Sun Sep 25 08:15:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.34"
[Sun Sep 25 08:15:23 2011] fullrun_ccd3_acisf10529_pi14-548_cl_pass0_src1.ximg exists
[Sun Sep 25 08:15:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10529_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 08:15:23 2011] fullrun_ccd3_acisf10529_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Sep 25 08:15:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10529_pi14-548_cl_pass0_src1.csv
[Sun Sep 25 08:15:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10529_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10529_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 08:15:23 2011] fullrun_ccd3_acisf10529_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 08:15:23 2011] fullrun_ccd3_acisf10529_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 08:15:23 2011] Fit fullrun_ccd3_acisf10529_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 08:15:35 2011] Spatial fit model total counts = 164.444000, observed total counts = 160.000000
[Sun Sep 25 08:15:35 2011] Offset between fit and detection position for source 1 = 1.520905 pixels
[Sun Sep 25 08:15:35 2011] 164.066900 total counts/ 17.619900 bgd. counts: snr = 34.888216
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.520905 pixels
  Position = (569.2, 939.8) = 5 41 2.40 69 35 55.4
  Extent = 1.9 (1.5-2.2)", rotation angle = 0
  Source counts = 146.4 +/- 12.8
  Background counts = 17.6
  Rate = 0.005 +/- 0.0004
[Sun Sep 25 08:15:35 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 08:15:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 08:15:35 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 08:15:35 2011] Source does appear to be extended
[Sun Sep 25 08:15:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 08:16:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 08:16:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 08:16:04 2011] Initial guess for spatial extent in simple fitting = 1.88"
[Sun Sep 25 08:16:04 2011] source mask rpix=3.8, npix_max = 74, mask sum = 78, frac = 1.043
[Sun Sep 25 08:16:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.88"
[Sun Sep 25 08:16:04 2011] fullrun_ccd3_acisf10529_pi14-548_cl_pass1_src1.ximg exists
[Sun Sep 25 08:16:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10529_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 08:16:04 2011] fullrun_ccd3_acisf10529_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Sep 25 08:16:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10529_pi14-548_cl_pass1_src1.csv
[Sun Sep 25 08:16:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10529_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10529_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 08:16:05 2011] fullrun_ccd3_acisf10529_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 08:16:05 2011] fullrun_ccd3_acisf10529_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 08:16:05 2011] Fit fullrun_ccd3_acisf10529_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 08:16:14 2011] Spatial fit model total counts = 158.058000, observed total counts = 157.000000
[Sun Sep 25 08:16:14 2011] Offset between fit and detection position for source 1 = 0.415947 pixels
[Sun Sep 25 08:16:14 2011] 157.156300 total counts/ 33.343300 bgd. counts: snr = 21.441835
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.415947 pixels
  Position = (569.2, 940.2) = 5 41 2.41 69 35 55.6
  Extent = 1.5 (1.2-1.9)", rotation angle = 0
  Source counts = 123.8 +/- 12.5
  Background counts = 33.3
  Rate = 0.004 +/- 0.0004
[Sun Sep 25 08:16:14 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 08:16:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 08:16:14 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 08:16:14 2011] Source does appear to be extended
[Sun Sep 25 08:16:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 08:20:01 2011] Not overwriting source region fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_src.reg
[Sun Sep 25 08:20:01 2011] Extracting stamp from image fullrun_ccd3_acisf10529_pi14-548_cl_sm2.00.img.gz, (500, 871) - (639, 1010)
[Sun Sep 25 08:20:01 2011] Writing fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1.gif
[Sun Sep 25 08:20:05 2011] ../../acisf10529/products/events/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_src.evt and ../../acisf10529/products/events/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Sep 25 08:20:05 2011] Size of ../../acisf10529/products/events/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_src.evt.gz[events] = 148 counts
[Sun Sep 25 08:20:05 2011] Mean chipx,y = (251.04, 473.22)
[Sun Sep 25 08:20:05 2011] Mean tdetx,y = (4658.78, 3312.04)
[Sun Sep 25 08:20:05 2011] chipx,y range = (229.00-276.00, 454.00-497.00)
[Sun Sep 25 08:20:05 2011] Size of ../../acisf10529/products/events/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 66 counts
[Sun Sep 25 08:20:05 2011] ../../acisf10529/products/images/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_src.img and ../../acisf10529/products/images/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Sep 25 08:20:05 2011] ../../acisf10529/products/spectra/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_src.pi and ../../acisf10529/products/spectra/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Sep 25 08:20:08 2011] ../../acisf10529/products/lightcurves/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_src.lc and ../../acisf10529/products/lightcurves/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Sep 25 08:21:35 2011] Keeping rmf generated by specextract
[Sun Sep 25 08:21:35 2011] 164.265
[Sun Sep 25 08:21:46 2011] Updating aperture counts using extracted products
[Sun Sep 25 08:21:47 2011] Error reading totcts from fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Sep 25 08:21:47 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 08:21:47 2011] Using photon index=1.80, rate=0.00395, arf fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1.arf
[Sun Sep 25 08:21:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 08:21:47 2011] Updating source flux to 5.5e-14
[Sun Sep 25 08:22:05 2011] Reading fit data from acisf10529/analysis//spectral/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_pl.csv
[Sun Sep 25 08:22:05 2011] Spectral fit parameter nH value = 3.44317e+14
[Sun Sep 25 08:22:05 2011] Spectral fit parameter PhoIndex value = 4.10303
[Sun Sep 25 08:22:05 2011] Failed to get F(0.3-8.0) from acisf10529/analysis//spectral/fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 08:22:05 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 08:22:05 2011] Using Nh = 3.4e+14, photon index=4.10, rate=0.00395, arf fullrun_ccd3_acisf10529_pi14-548_pass1_cl_src1.arf
[Sun Sep 25 08:22:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 08:22:05 2011] Updating source flux to 1.6e-13