[Sun Sep 25 08:14:18 2011] Detection parameters:
  Position = (397.4, 722.7) = 5 40 7.84 69 28 10.8
  Extent = 0.6" x 0.5", rotation angle = 144 degrees
  Source counts = 41.6 +/- 6.6
  Background counts = 1.4
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 08:14:19 2011] Off-axis axis estimate = 3.87'
[Sun Sep 25 08:15:20 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 08:15:20 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Sun Sep 25 08:15:20 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.124
[Sun Sep 25 08:15:20 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.79"
[Sun Sep 25 08:15:21 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src5.ximg exists
[Sun Sep 25 08:15:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src5.csv
[Sun Sep 25 08:15:21 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Sep 25 08:15:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src5.csv
[Sun Sep 25 08:15:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 08:15:21 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Sep 25 08:15:21 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Sep 25 08:15:21 2011] Fit fullrun_ccd1_acisf10529_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Sep 25 08:15:31 2011] Spatial fit model total counts = 44.385200, observed total counts = 45.000000
[Sun Sep 25 08:15:31 2011] Offset between fit and detection position for source 5 = 0.747631 pixels
[Sun Sep 25 08:15:31 2011] 44.818150 total counts/ 4.233450 bgd. counts: snr = 19.724914
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.747631 pixels
  Position = (398.0, 723.1) = 5 40 7.83 69 28 10.8
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 40.6 +/- 6.7
  Background counts = 4.2
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 08:15:31 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 08:15:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 08:15:31 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 08:15:31 2011] Source does appear to be extended
[Sun Sep 25 08:15:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 08:16:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 08:16:00 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sun Sep 25 08:16:00 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.129
[Sun Sep 25 08:16:00 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.68"
[Sun Sep 25 08:16:02 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src5.ximg exists
[Sun Sep 25 08:16:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src5.csv
[Sun Sep 25 08:16:02 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src5_1.ximg exists
[Sun Sep 25 08:16:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src5.csv
[Sun Sep 25 08:16:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 08:16:03 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun Sep 25 08:16:03 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Sep 25 08:16:03 2011] Fit fullrun_ccd1_acisf10529_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Sep 25 08:16:11 2011] Spatial fit model total counts = 44.128300, observed total counts = 45.000000
[Sun Sep 25 08:16:11 2011] Offset between fit and detection position for source 5 = 0.057110 pixels
[Sun Sep 25 08:16:11 2011] 44.703200 total counts/ 4.015800 bgd. counts: snr = 20.303640
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.057110 pixels
  Position = (398.0, 723.1) = 5 40 7.84 69 28 10.8
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 40.7 +/- 6.7
  Background counts = 4.0
  Rate = 0.001 +/- 0.0002
[Sun Sep 25 08:16:11 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 08:16:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 08:16:11 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 08:16:11 2011] Source does appear to be extended
[Sun Sep 25 08:16:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 08:17:15 2011] Not overwriting source region fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_src.reg
[Sun Sep 25 08:17:15 2011] Extracting stamp from image fullrun_ccd1_acisf10529_pi14-548_cl_sm2.00.img.gz, (366, 691) - (430, 755)
[Sun Sep 25 08:17:15 2011] Writing fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5.gif
[Sun Sep 25 08:17:39 2011] ../../acisf10529/products/events/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_src.evt and ../../acisf10529/products/events/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Sep 25 08:17:39 2011] Size of ../../acisf10529/products/events/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_src.evt.gz[events] = 42 counts
[Sun Sep 25 08:17:39 2011] Mean chipx,y = (283.45, 745.05)
[Sun Sep 25 08:17:39 2011] Mean tdetx,y = (4386.95, 4390.45)
[Sun Sep 25 08:17:39 2011] chipx,y range = (265.00-301.00, 727.00-762.00)
[Sun Sep 25 08:17:39 2011] Size of ../../acisf10529/products/events/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 13 counts
[Sun Sep 25 08:17:39 2011] ../../acisf10529/products/images/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_src.img and ../../acisf10529/products/images/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Sep 25 08:17:39 2011] ../../acisf10529/products/spectra/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_src.pi and ../../acisf10529/products/spectra/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Sep 25 08:17:39 2011] Not generating rmf since there are only 40 counts
[Sun Sep 25 08:17:42 2011] ../../acisf10529/products/lightcurves/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_src.lc and ../../acisf10529/products/lightcurves/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Sep 25 08:18:34 2011] 197.283
[Sun Sep 25 08:21:46 2011] Updating aperture counts using extracted products
[Sun Sep 25 08:21:46 2011] Error reading totcts from fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Sep 25 08:21:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 08:21:46 2011] Using photon index=1.80, rate=0.0013, arf fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src5.arf
[Sun Sep 25 08:21:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 08:21:46 2011] Updating source flux to 1.5e-14
[Sun Sep 25 08:21:51 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting