[Sun Sep 25 08:14:18 2011] Detection parameters:
  Position = (266.8, 604.7) = 5 40 20.08 69 27 12.9
  Extent = 0.6" x 0.5", rotation angle = 143 degrees
  Source counts = 56.5 +/- 7.6
  Background counts = 1.5
  Rate = 0.002 +/- 0.0002

[Sun Sep 25 08:14:19 2011] Off-axis axis estimate = 3.14'
[Sun Sep 25 08:15:20 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 08:15:20 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Sun Sep 25 08:15:20 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.991
[Sun Sep 25 08:15:20 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.61"
[Sun Sep 25 08:15:21 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src3.ximg exists
[Sun Sep 25 08:15:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 08:15:21 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Sep 25 08:15:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src3.csv
[Sun Sep 25 08:15:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10529_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 08:15:21 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Sep 25 08:15:21 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Sep 25 08:15:21 2011] Fit fullrun_ccd1_acisf10529_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Sep 25 08:15:31 2011] Spatial fit model total counts = 60.999200, observed total counts = 61.000000
[Sun Sep 25 08:15:31 2011] Offset between fit and detection position for source 17 = 0.727406 pixels
[Sun Sep 25 08:15:31 2011] 60.715500 total counts/ 5.691900 bgd. counts: snr = 23.063243
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.727406 pixels
  Position = (267.2, 605.3) = 5 40 20.09 69 27 13.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 55.0 +/- 7.8
  Background counts = 5.7
  Rate = 0.002 +/- 0.0002
[Sun Sep 25 08:15:31 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 08:15:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 08:15:31 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 08:15:31 2011] Source does appear to be extended
[Sun Sep 25 08:15:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 08:16:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 08:16:00 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Sun Sep 25 08:16:00 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.838
[Sun Sep 25 08:16:00 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.56"
[Sun Sep 25 08:16:02 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src3.ximg exists
[Sun Sep 25 08:16:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 08:16:02 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Sep 25 08:16:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src3.csv
[Sun Sep 25 08:16:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10529_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 08:16:03 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Sep 25 08:16:03 2011] fullrun_ccd1_acisf10529_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Sep 25 08:16:03 2011] Fit fullrun_ccd1_acisf10529_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Sep 25 08:16:11 2011] Spatial fit model total counts = 61.893200, observed total counts = 62.000000
[Sun Sep 25 08:16:11 2011] Offset between fit and detection position for source 17 = 0.009568 pixels
[Sun Sep 25 08:16:11 2011] 61.300360 total counts/ 6.597260 bgd. counts: snr = 21.297574
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.009568 pixels
  Position = (267.2, 605.3) = 5 40 20.09 69 27 13.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 54.7 +/- 7.8
  Background counts = 6.6
  Rate = 0.002 +/- 0.0002
[Sun Sep 25 08:16:11 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 08:16:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 08:16:11 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 08:16:11 2011] Source does appear to be extended
[Sun Sep 25 08:16:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 08:17:15 2011] Not overwriting source region fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_src.reg
[Sun Sep 25 08:17:15 2011] Extracting stamp from image fullrun_ccd1_acisf10529_pi14-548_cl_sm2.00.img.gz, (242, 580) - (293, 631)
[Sun Sep 25 08:17:15 2011] Writing fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17.gif
[Sun Sep 25 08:17:25 2011] ../../acisf10529/products/events/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_src.evt and ../../acisf10529/products/events/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sun Sep 25 08:17:25 2011] Size of ../../acisf10529/products/events/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_src.evt.gz[events] = 57 counts
[Sun Sep 25 08:17:25 2011] Mean chipx,y = (269.82, 920.89)
[Sun Sep 25 08:17:25 2011] Mean tdetx,y = (4211.11, 4376.82)
[Sun Sep 25 08:17:25 2011] chipx,y range = (252.00-288.00, 905.00-938.00)
[Sun Sep 25 08:17:25 2011] Size of ../../acisf10529/products/events/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 15 counts
[Sun Sep 25 08:17:25 2011] ../../acisf10529/products/images/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_src.img and ../../acisf10529/products/images/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_bgd.img exist, delete to re-create
[Sun Sep 25 08:17:25 2011] ../../acisf10529/products/spectra/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_src.pi and ../../acisf10529/products/spectra/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_bgd.pi exist, delete to re-create
[Sun Sep 25 08:17:25 2011] Not generating rmf since there are only 54 counts
[Sun Sep 25 08:17:30 2011] ../../acisf10529/products/lightcurves/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_src.lc and ../../acisf10529/products/lightcurves/fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_bgd.lc exist, delete to re-create
[Sun Sep 25 08:18:34 2011] 182.862
[Sun Sep 25 08:21:46 2011] Updating aperture counts using extracted products
[Sun Sep 25 08:21:46 2011] Error reading totcts from fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17_src.pi.gz
[Sun Sep 25 08:21:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 08:21:46 2011] Using photon index=1.80, rate=0.00174, arf fullrun_ccd1_acisf10529_pi14-548_pass1_cl_src17.arf
[Sun Sep 25 08:21:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 08:21:46 2011] Updating source flux to 2.2e-14
[Sun Sep 25 08:21:51 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting