[Wed Sep 28 17:07:25 2011] Detection parameters:
  Position = (767.7, 490.5) = 5 43 11.81 69 32 59.5
  Extent = 0.5" x 0.5", rotation angle = 124 degrees
  Source counts = 12.5 +/- 3.6
  Background counts = 0.5
  Rate = 0.0004 +/- 0.0001

[Wed Sep 28 17:07:26 2011] Off-axis axis estimate = 3.62'
[Wed Sep 28 17:08:19 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:08:19 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Wed Sep 28 17:08:19 2011] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.775
[Wed Sep 28 17:08:19 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.72"
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src5.ximg exists
[Wed Sep 28 17:08:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src5.csv
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Sep 28 17:08:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src5.csv
[Wed Sep 28 17:08:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Sep 28 17:08:20 2011] Fit fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Sep 28 17:08:35 2011] Spatial fit model total counts = 15.607700, observed total counts = 16.000000
[Wed Sep 28 17:08:35 2011] Offset between fit and detection position for source 9 = 0.728866 pixels
[Wed Sep 28 17:08:35 2011] 15.246880 total counts/ 2.838680 bgd. counts: snr = 7.364624
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.728866 pixels
  Position = (768.3, 491.0) = 5 43 11.81 69 32 59.5
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.4 +/- 3.9
  Background counts = 2.8
  Rate = 0.0004 +/- 0.0001
[Wed Sep 28 17:08:35 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:08:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:08:35 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:08:35 2011] Source does appear to be extended
[Wed Sep 28 17:08:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:09:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:09:02 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Sep 28 17:09:02 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.779
[Wed Sep 28 17:09:02 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.44"
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src5.ximg exists
[Wed Sep 28 17:09:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src5.csv
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Sep 28 17:09:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src5.csv
[Wed Sep 28 17:09:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Sep 28 17:09:03 2011] Fit fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Sep 28 17:09:16 2011] Spatial fit model total counts = 15.679300, observed total counts = 16.000000
[Wed Sep 28 17:09:16 2011] Offset between fit and detection position for source 9 = 0.038942 pixels
[Wed Sep 28 17:09:16 2011] 15.074850 total counts/ 2.568550 bgd. counts: snr = 7.803417
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.038942 pixels
  Position = (768.2, 491.0) = 5 43 11.81 69 32 59.5
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 12.5 +/- 3.9
  Background counts = 2.6
  Rate = 0.0004 +/- 0.0001
[Wed Sep 28 17:09:16 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:09:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:09:16 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:09:16 2011] Source does appear to be extended
[Wed Sep 28 17:09:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:12:24 2011] Not overwriting source region fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_src.reg
[Wed Sep 28 17:12:24 2011] Extracting stamp from image fullrun_ccd3_acisf10528_pi14-548_cl_sm2.00.img.gz, (749, 472) - (788, 511)
[Wed Sep 28 17:12:24 2011] Writing fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9.gif
[Wed Sep 28 17:12:36 2011] ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_src.evt and ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Wed Sep 28 17:12:36 2011] Size of ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_src.evt.gz[events] = 13 counts
[Wed Sep 28 17:12:36 2011] Mean chipx,y = (711.23, 651.54)
[Wed Sep 28 17:12:36 2011] Mean tdetx,y = (4480.46, 3772.23)
[Wed Sep 28 17:12:36 2011] chipx,y range = (696.00-732.00, 636.00-667.00)
[Wed Sep 28 17:12:36 2011] Size of ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 4 counts
[Wed Sep 28 17:12:36 2011] ../../acisf10528/products/images/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_src.img and ../../acisf10528/products/images/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Wed Sep 28 17:12:36 2011] ../../acisf10528/products/spectra/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_src.pi and ../../acisf10528/products/spectra/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Wed Sep 28 17:12:36 2011] Not generating rmf since there are only 12 counts
[Wed Sep 28 17:12:39 2011] ../../acisf10528/products/lightcurves/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_src.lc and ../../acisf10528/products/lightcurves/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Wed Sep 28 17:13:24 2011] 192.966
[Wed Sep 28 17:13:36 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:13:36 2011] Error reading totcts from fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_src.pi.gz
[Wed Sep 28 17:13:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:13:36 2011] Using photon index=1.80, rate=0.000395, arf fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9.arf
[Wed Sep 28 17:13:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:13:36 2011] Updating source flux to 4.6e-15
[Wed Sep 28 17:13:44 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 17:13:45 2011] acisf10528/analysis//spectral/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete