[Wed Sep 28 17:07:25 2011] Detection parameters:
  Position = (1109.0, 421.2) = 5 42 39.79 69 32 25.1
  Extent = 0.7" x 0.5", rotation angle = 9 degrees
  Source counts = 16.0 +/- 4.1
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Wed Sep 28 17:07:26 2011] Off-axis axis estimate = 4.62'
[Wed Sep 28 17:08:19 2011] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:08:19 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Wed Sep 28 17:08:19 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.104
[Wed Sep 28 17:08:19 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.04"
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src4.ximg exists
[Wed Sep 28 17:08:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src4.csv
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Sep 28 17:08:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src4.csv
[Wed Sep 28 17:08:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Sep 28 17:08:20 2011] Fit fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Sep 28 17:08:35 2011] Spatial fit model total counts = 21.079800, observed total counts = 21.000000
[Wed Sep 28 17:08:35 2011] Offset between fit and detection position for source 7 = 0.464687 pixels
[Wed Sep 28 17:08:35 2011] 21.845880 total counts/ 6.568480 bgd. counts: snr = 5.960971
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.464687 pixels
  Position = (1109.2, 421.6) = 5 42 39.82 69 32 25.0
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 15.3 +/- 4.7
  Background counts = 6.6
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 17:08:35 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:08:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:08:35 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:08:35 2011] Source does appear to be extended
[Wed Sep 28 17:08:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:09:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:09:02 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Wed Sep 28 17:09:02 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.930
[Wed Sep 28 17:09:02 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.64"
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src4.ximg exists
[Wed Sep 28 17:09:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src4.csv
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src4_1.ximg exists
[Wed Sep 28 17:09:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src4.csv
[Wed Sep 28 17:09:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Sep 28 17:09:03 2011] Fit fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Sep 28 17:09:16 2011] Spatial fit model total counts = 20.128000, observed total counts = 21.000000
[Wed Sep 28 17:09:16 2011] Offset between fit and detection position for source 7 = 0.042868 pixels
[Wed Sep 28 17:09:16 2011] 20.825580 total counts/ 5.987680 bgd. counts: snr = 6.063776
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.042868 pixels
  Position = (1109.3, 421.6) = 5 42 39.81 69 32 25.1
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 14.8 +/- 4.6
  Background counts = 6.0
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 17:09:16 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:09:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:09:16 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:09:16 2011] Source does appear to be extended
[Wed Sep 28 17:09:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:12:24 2011] Not overwriting source region fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_src.reg
[Wed Sep 28 17:12:24 2011] Extracting stamp from image fullrun_ccd3_acisf10528_pi14-548_cl_sm2.00.img.gz, (1079, 391) - (1140, 452)
[Wed Sep 28 17:12:24 2011] Writing fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7.gif
[Wed Sep 28 17:12:34 2011] ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_src.evt and ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Sep 28 17:12:34 2011] Size of ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_src.evt.gz[events] = 18 counts
[Wed Sep 28 17:12:34 2011] Mean chipx,y = (1008.61, 466.61)
[Wed Sep 28 17:12:34 2011] Mean tdetx,y = (4665.39, 4069.61)
[Wed Sep 28 17:12:34 2011] chipx,y range = (989.00-1023.00, 449.00-481.00)
[Wed Sep 28 17:12:34 2011] Size of ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 14 counts
[Wed Sep 28 17:12:34 2011] ../../acisf10528/products/images/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_src.img and ../../acisf10528/products/images/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Sep 28 17:12:34 2011] ../../acisf10528/products/spectra/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_src.pi and ../../acisf10528/products/spectra/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Sep 28 17:12:34 2011] Not generating rmf since there are only 14 counts
[Wed Sep 28 17:12:36 2011] ../../acisf10528/products/lightcurves/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_src.lc and ../../acisf10528/products/lightcurves/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Sep 28 17:13:24 2011] 191.807
[Wed Sep 28 17:13:36 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:13:36 2011] Error reading totcts from fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Sep 28 17:13:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:13:36 2011] Using photon index=1.80, rate=0.000469, arf fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7.arf
[Wed Sep 28 17:13:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:13:36 2011] Updating source flux to 5.5e-15
[Wed Sep 28 17:13:44 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 17:13:45 2011] acisf10528/analysis//spectral/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete