[Wed Sep 28 17:07:25 2011] Detection parameters:
  Position = (722.9, 296.8) = 5 43 16.03 69 31 24.2
  Extent = 0.6" x 0.5", rotation angle = 173 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Wed Sep 28 17:07:26 2011] Off-axis axis estimate = 1.99'
[Wed Sep 28 17:08:19 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:08:19 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Wed Sep 28 17:08:19 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.798
[Wed Sep 28 17:08:19 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.43"
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src6.ximg exists
[Wed Sep 28 17:08:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src6.csv
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Sep 28 17:08:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src6.csv
[Wed Sep 28 17:08:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10528_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Sep 28 17:08:20 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Sep 28 17:08:20 2011] Fit fullrun_ccd3_acisf10528_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Sep 28 17:08:35 2011] Spatial fit model total counts = 13.091800, observed total counts = 14.000000
[Wed Sep 28 17:08:35 2011] Offset between fit and detection position for source 4 = 0.627396 pixels
[Wed Sep 28 17:08:35 2011] 13.660710 total counts/ 3.107610 bgd. counts: snr = 5.986415
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.627396 pixels
  Position = (722.8, 297.4) = 5 43 16.08 69 31 24.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.6 +/- 3.7
  Background counts = 3.1
  Rate = 0.0003 +/- 0.0001
[Wed Sep 28 17:08:35 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:08:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:08:35 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:08:35 2011] Source does appear to be extended
[Wed Sep 28 17:08:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:09:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:09:02 2011] Initial guess for spatial extent in simple fitting = 0.36"
[Wed Sep 28 17:09:02 2011] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.981
[Wed Sep 28 17:09:02 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.36"
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src6.ximg exists
[Wed Sep 28 17:09:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src6.csv
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Sep 28 17:09:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src6.csv
[Wed Sep 28 17:09:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10528_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Sep 28 17:09:03 2011] fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Sep 28 17:09:03 2011] Fit fullrun_ccd3_acisf10528_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Sep 28 17:09:16 2011] Spatial fit model total counts = 13.508800, observed total counts = 14.000000
[Wed Sep 28 17:09:16 2011] Offset between fit and detection position for source 4 = 0.016827 pixels
[Wed Sep 28 17:09:16 2011] 14.082450 total counts/ 3.277650 bgd. counts: snr = 5.968091
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.016827 pixels
  Position = (722.8, 297.4) = 5 43 16.08 69 31 24.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.8 +/- 3.8
  Background counts = 3.3
  Rate = 0.0003 +/- 0.0001
[Wed Sep 28 17:09:16 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:09:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:09:16 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:09:16 2011] Source does appear to be extended
[Wed Sep 28 17:09:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:12:24 2011] Not overwriting source region fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_src.reg
[Wed Sep 28 17:12:24 2011] Extracting stamp from image fullrun_ccd3_acisf10528_pi14-548_cl_sm2.00.img.gz, (706, 281) - (739, 314)
[Wed Sep 28 17:12:24 2011] Writing fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4.gif
[Wed Sep 28 17:12:39 2011] ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_src.evt and ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Sep 28 17:12:39 2011] Size of ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_src.evt.gz[events] = 11 counts
[Wed Sep 28 17:12:39 2011] Mean chipx,y = (809.09, 817.27)
[Wed Sep 28 17:12:39 2011] Mean tdetx,y = (4314.73, 3870.09)
[Wed Sep 28 17:12:39 2011] chipx,y range = (798.00-830.00, 808.00-836.00)
[Wed Sep 28 17:12:39 2011] Size of ../../acisf10528/products/events/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 1 counts
[Wed Sep 28 17:12:39 2011] ../../acisf10528/products/images/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_src.img and ../../acisf10528/products/images/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Sep 28 17:12:39 2011] ../../acisf10528/products/spectra/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_src.pi and ../../acisf10528/products/spectra/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Sep 28 17:12:39 2011] Not generating rmf since there are only 10 counts
[Wed Sep 28 17:12:42 2011] ../../acisf10528/products/lightcurves/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_src.lc and ../../acisf10528/products/lightcurves/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Sep 28 17:13:24 2011] 199.912
[Wed Sep 28 17:13:36 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:13:36 2011] Error reading totcts from fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Sep 28 17:13:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:13:36 2011] Using photon index=1.80, rate=0.000341, arf fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4.arf
[Wed Sep 28 17:13:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:13:36 2011] Updating source flux to 3.9e-15
[Wed Sep 28 17:13:44 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 17:13:45 2011] acisf10528/analysis//spectral/fullrun_ccd3_acisf10528_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete