[Wed Sep 28 17:07:24 2011] Detection parameters:
  Position = (369.9, 997.1) = 5 44 56.61 69 31 5.5
  Extent = 3.7" x 1.4", rotation angle = 69 degrees
  Source counts = 12.3 +/- 4.4
  Background counts = 6.7
  Rate = 0.0004 +/- 0.0001

[Wed Sep 28 17:07:25 2011] Off-axis axis estimate = 8.59'
[Wed Sep 28 17:08:18 2011] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:08:18 2011] Initial guess for spatial extent in simple fitting = 3.26"
[Wed Sep 28 17:08:18 2011] source mask rpix=6.6, npix_max = 202, mask sum = 191, frac = 0.942
[Wed Sep 28 17:08:18 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 3.26"
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src17.ximg exists
[Wed Sep 28 17:08:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src17.csv
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src17_1.ximg exists
[Wed Sep 28 17:08:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src17.csv
[Wed Sep 28 17:08:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Sep 28 17:08:19 2011] Fit fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Sep 28 17:08:32 2011] Spatial fit model total counts = 29.643600, observed total counts = 31.000000
[Wed Sep 28 17:08:32 2011] Offset between fit and detection position for source 23 = 6.827501 pixels
[Wed Sep 28 17:08:32 2011] 29.050200 total counts/ 15.903800 bgd. counts: snr = 3.296525
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 6.827501 pixels
  Position = (371.0, 1003.9) = 5 44 56.55 69 31 8.5
  Extent = 2.3 (0.9-4.0)", rotation angle = 0
  Source counts = 13.1 +/- 5.4
  Background counts = 15.9
  Rate = 0.0004 +/- 0.0002
[Wed Sep 28 17:08:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:08:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:08:32 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:08:32 2011] Source does appear to be extended
[Wed Sep 28 17:08:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:09:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:09:01 2011] Initial guess for spatial extent in simple fitting = 2.32"
[Wed Sep 28 17:09:01 2011] source mask rpix=4.7, npix_max = 108, mask sum = 91, frac = 0.839
[Wed Sep 28 17:09:01 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 2.32"
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src17.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src17.csv
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src17_1.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src17.csv
[Wed Sep 28 17:09:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src17.csv
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src17.csv
[Wed Sep 28 17:09:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:09:14 2011] Warning, spatial fit 17 centroid is now closest to src. 21
[Wed Sep 28 17:09:14 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:09:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:09:14 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:09:14 2011] Source does appear to be extended
[Wed Sep 28 17:09:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:11:05 2011] Not overwriting source region fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_src.reg
[Wed Sep 28 17:11:05 2011] Extracting stamp from image fullrun_ccd2_acisf10528_pi14-548_cl_sm2.00.img.gz, (265, 898) - (477, 1110)
[Wed Sep 28 17:11:05 2011] Writing fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23.gif
[Wed Sep 28 17:11:51 2011] ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_src.evt and ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed Sep 28 17:11:51 2011] Size of ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_src.evt.gz[events] = 25 counts
[Wed Sep 28 17:11:51 2011] Mean chipx,y = (958.48, 472.20)
[Wed Sep 28 17:11:51 2011] Mean tdetx,y = (3533.20, 3127.52)
[Wed Sep 28 17:11:51 2011] chipx,y range = (933.00-986.00, 446.00-495.00)
[Wed Sep 28 17:11:51 2011] Size of ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 107 counts
[Wed Sep 28 17:11:51 2011] ../../acisf10528/products/images/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_src.img and ../../acisf10528/products/images/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed Sep 28 17:11:51 2011] ../../acisf10528/products/spectra/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_src.pi and ../../acisf10528/products/spectra/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Wed Sep 28 17:11:51 2011] Not generating rmf since there are only 13 counts
[Wed Sep 28 17:11:54 2011] ../../acisf10528/products/lightcurves/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_src.lc and ../../acisf10528/products/lightcurves/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Wed Sep 28 17:12:23 2011] 155.689
[Wed Sep 28 17:13:35 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:13:35 2011] Error reading totcts from fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23_src.pi.gz
[Wed Sep 28 17:13:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:13:36 2011] Using photon index=1.80, rate=0.000415, arf fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src23.arf
[Wed Sep 28 17:13:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:13:36 2011] Updating source flux to 6e-15
[Wed Sep 28 17:13:41 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting