[Wed Sep 28 17:07:24 2011] Detection parameters:
  Position = (855.7, 455.4) = 5 44 10.89 69 26 40.1
  Extent = 0.7" x 0.6", rotation angle = 49 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Wed Sep 28 17:07:25 2011] Off-axis axis estimate = 5.24'
[Wed Sep 28 17:08:18 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:08:18 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Wed Sep 28 17:08:18 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.096
[Wed Sep 28 17:08:18 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 1.28"
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src18.ximg exists
[Wed Sep 28 17:08:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src18.csv
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src18_1.ximg exists
[Wed Sep 28 17:08:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src18.csv
[Wed Sep 28 17:08:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Sep 28 17:08:19 2011] Fit fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Sep 28 17:08:32 2011] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 14.601376 pixels away
[Wed Sep 28 17:08:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:08:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:08:32 2011] Assessing source extent using major
[Wed Sep 28 17:08:32 2011] Source does appear to be extended
[Wed Sep 28 17:08:32 2011] Computing asymmetry using major and minor axis, asym = 1.31
[Wed Sep 28 17:09:01 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:09:01 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Wed Sep 28 17:09:01 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.096
[Wed Sep 28 17:09:01 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.28"
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src18.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src18.csv
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src18_1.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src18.csv
[Wed Sep 28 17:09:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Sep 28 17:09:02 2011] Fit fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Wed Sep 28 17:09:14 2011] Spatial fit model total counts = 15.027600, observed total counts = 15.000000
[Wed Sep 28 17:09:14 2011] Offset between fit and detection position for source 19 = 0.822937 pixels
[Wed Sep 28 17:09:14 2011] 15.315610 total counts/ 3.676710 bgd. counts: snr = 6.069910
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.822937 pixels
  Position = (856.3, 456.0) = 5 44 10.88 69 26 40.2
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 11.6 +/- 3.9
  Background counts = 3.7
  Rate = 0.0004 +/- 0.0001
[Wed Sep 28 17:09:14 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:09:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:09:14 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:09:14 2011] Source does appear to be extended
[Wed Sep 28 17:09:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:11:05 2011] Not overwriting source region fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_src.reg
[Wed Sep 28 17:11:05 2011] Extracting stamp from image fullrun_ccd2_acisf10528_pi14-548_cl_sm2.00.img.gz, (819, 419) - (894, 493)
[Wed Sep 28 17:11:05 2011] Writing fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19.gif
[Wed Sep 28 17:11:54 2011] ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_src.evt and ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Wed Sep 28 17:11:54 2011] Size of ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_src.evt.gz[events] = 13 counts
[Wed Sep 28 17:11:54 2011] Mean chipx,y = (228.92, 427.77)
[Wed Sep 28 17:11:54 2011] Mean tdetx,y = (3488.77, 3857.08)
[Wed Sep 28 17:11:54 2011] chipx,y range = (213.00-245.00, 407.00-442.00)
[Wed Sep 28 17:11:54 2011] Size of ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 9 counts
[Wed Sep 28 17:11:54 2011] ../../acisf10528/products/images/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_src.img and ../../acisf10528/products/images/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Wed Sep 28 17:11:54 2011] ../../acisf10528/products/spectra/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_src.pi and ../../acisf10528/products/spectra/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Wed Sep 28 17:11:54 2011] Not generating rmf since there are only 11 counts
[Wed Sep 28 17:11:57 2011] ../../acisf10528/products/lightcurves/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_src.lc and ../../acisf10528/products/lightcurves/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Wed Sep 28 17:12:23 2011] 177.894
[Wed Sep 28 17:13:35 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:13:35 2011] Error reading totcts from fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19_src.pi.gz
[Wed Sep 28 17:13:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:13:36 2011] Using photon index=1.80, rate=0.000368, arf fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src19.arf
[Wed Sep 28 17:13:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:13:36 2011] Updating source flux to 4.6e-15
[Wed Sep 28 17:13:41 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting