[Wed Sep 28 17:07:24 2011] Detection parameters:
  Position = (1262.3, 769.1) = 5 43 32.93 69 29 14.9
  Extent = 0.5" x 0.5", rotation angle = 41 degrees
  Source counts = 16.5 +/- 4.1
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0001

[Wed Sep 28 17:07:25 2011] Off-axis axis estimate = 1.12'
[Wed Sep 28 17:08:18 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:08:18 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Sep 28 17:08:18 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Wed Sep 28 17:08:18 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.38"
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src13.ximg exists
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src13_1.ximg exists
[Wed Sep 28 17:08:19 2011] Fit fullrun_ccd2_acisf10528_pi14-548_cl_pass0_src13 appears to have run properly
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed Sep 28 17:08:19 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Sep 28 17:08:19 2011] Fit fullrun_ccd2_acisf10528_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Sep 28 17:08:32 2011] Spatial fit model total counts = 18.719000, observed total counts = 19.000000
[Wed Sep 28 17:08:32 2011] Offset between fit and detection position for source 14 = 0.723360 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.723360 pixels
  Position = (1262.8, 769.7) = 5 43 32.93 69 29 14.9
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 18.1 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Wed Sep 28 17:08:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:08:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:08:32 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:08:32 2011] Source does appear to be extended
[Wed Sep 28 17:08:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:09:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 17:09:01 2011] Initial guess for spatial extent in simple fitting = 0.35"
[Wed Sep 28 17:09:01 2011] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.037
[Wed Sep 28 17:09:01 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.35"
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src13.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src13.csv
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src13_1.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src13.csv
[Wed Sep 28 17:09:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10528_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src13.csv
[Wed Sep 28 17:09:02 2011] fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Sep 28 17:09:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src13.csv
[Wed Sep 28 17:09:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10528_pi14-548_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 17:09:14 2011] Spatial fit model total counts = 16.716800, observed total counts = 19.000000
[Wed Sep 28 17:09:14 2011] Offset between fit and detection position for source 14 = 0.006999 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.006999 pixels
  Position = (1262.8, 769.7) = 5 43 32.93 69 29 14.9
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed Sep 28 17:09:14 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 17:09:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 17:09:14 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 17:09:14 2011] Source does appear to be extended
[Wed Sep 28 17:09:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 17:11:05 2011] Not overwriting source region fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_src.reg
[Wed Sep 28 17:11:05 2011] Extracting stamp from image fullrun_ccd2_acisf10528_pi14-548_cl_sm2.00.img.gz, (1246, 753) - (1280, 786)
[Wed Sep 28 17:11:05 2011] Writing fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14.gif
[Wed Sep 28 17:11:39 2011] ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_src.evt and ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Wed Sep 28 17:11:39 2011] Size of ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_src.evt.gz[events] = 17 counts
[Wed Sep 28 17:11:39 2011] Mean chipx,y = (156.41, 934.82)
[Wed Sep 28 17:11:39 2011] Mean tdetx,y = (3995.82, 3929.59)
[Wed Sep 28 17:11:39 2011] chipx,y range = (141.00-172.00, 917.00-950.00)
[Wed Sep 28 17:11:39 2011] Size of ../../acisf10528/products/events/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 2 counts
[Wed Sep 28 17:11:39 2011] ../../acisf10528/products/images/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_src.img and ../../acisf10528/products/images/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Wed Sep 28 17:11:39 2011] ../../acisf10528/products/spectra/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_src.pi and ../../acisf10528/products/spectra/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Wed Sep 28 17:11:39 2011] Not generating rmf since there are only 16 counts
[Wed Sep 28 17:11:42 2011] ../../acisf10528/products/lightcurves/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_src.lc and ../../acisf10528/products/lightcurves/fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Wed Sep 28 17:12:23 2011] 195.44
[Wed Sep 28 17:13:35 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:13:35 2011] Error reading totcts from fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14_src.pi.gz
[Wed Sep 28 17:13:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:13:36 2011] Using photon index=1.80, rate=0.000516, arf fullrun_ccd2_acisf10528_pi14-548_pass1_cl_src14.arf
[Wed Sep 28 17:13:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 17:13:36 2011] Updating source flux to 5.9e-15
[Wed Sep 28 17:13:41 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting