[Fri Oct 28 12:14:40 2011] Detection parameters:
  Position = (58.4, 471.7) = 15 38 13.33 -55 42 15.9
  Extent = 3.5" x 3.2", rotation angle = 152 degrees
  Source counts = 477.5 +/- 29.7
  Background counts = 405.5
  Rate = 0.1 +/- 0.007

[Fri Oct 28 12:14:40 2011] Off-axis axis estimate = 14.14'
[Fri Oct 28 12:15:02 2011] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:15:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 12:15:02 2011] Initial guess for spatial extent in simple fitting = 9.02"
[Fri Oct 28 12:15:02 2011] source mask rpix=18.3, npix_max = 1417, mask sum = 1377, frac = 0.971
[Fri Oct 28 12:15:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.02"
[Fri Oct 28 12:15:02 2011] fullrun_ccd5_acisf10509_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 12:15:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf10509_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 12:15:02 2011] fullrun_ccd5_acisf10509_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 12:15:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf10509_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 12:15:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf10509_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf10509_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:15:02 2011] fullrun_ccd5_acisf10509_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 12:15:02 2011] fullrun_ccd5_acisf10509_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 12:15:02 2011] Fit fullrun_ccd5_acisf10509_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 12:15:06 2011] Spatial fit model total counts = 1241.060000, observed total counts = 1170.000000
[Fri Oct 28 12:15:06 2011] Offset between fit and detection position for source 1 = 2.446906 pixels
[Fri Oct 28 12:15:06 2011] 1241.479000 total counts/ 141.919000 bgd. counts: snr = 92.299354
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.446906 pixels
  Position = (59.8, 473.7) = 15 38 13.28 -55 42 15.1
  Extent = 10.1 (9.4-10.8)", rotation angle = 0
  Source counts = 1099.6 +/- 35.2
  Background counts = 141.9
  Rate = 0.2 +/- 0.008
[Fri Oct 28 12:15:06 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:15:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:15:06 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:15:06 2011] Source does appear to be extended
[Fri Oct 28 12:15:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:15:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:15:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 12:15:15 2011] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Oct 28 12:15:15 2011] source mask rpix=20.5, npix_max = 1765, mask sum = 1687, frac = 0.956
[Fri Oct 28 12:15:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.09"
[Fri Oct 28 12:15:15 2011] fullrun_ccd5_acisf10509_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 12:15:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf10509_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 12:15:15 2011] fullrun_ccd5_acisf10509_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 12:15:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf10509_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 12:15:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd5_acisf10509_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd5_acisf10509_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:15:15 2011] fullrun_ccd5_acisf10509_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 12:15:15 2011] fullrun_ccd5_acisf10509_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 12:15:15 2011] Fit fullrun_ccd5_acisf10509_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 12:15:18 2011] Spatial fit model total counts = 1286.260000, observed total counts = 1212.000000
[Fri Oct 28 12:15:18 2011] Offset between fit and detection position for source 1 = 0.170213 pixels
[Fri Oct 28 12:15:18 2011] 1286.486000 total counts/ 189.706000 bgd. counts: snr = 79.630417
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.170213 pixels
  Position = (59.9, 473.8) = 15 38 13.27 -55 42 15.1
  Extent = 10.1 (9.4-10.7)", rotation angle = 0
  Source counts = 1096.8 +/- 35.9
  Background counts = 189.7
  Rate = 0.2 +/- 0.008
[Fri Oct 28 12:15:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:15:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:15:18 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:15:18 2011] Source does appear to be extended
[Fri Oct 28 12:15:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:15:27 2011] Not overwriting source region fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 28 12:15:27 2011] Extracting stamp from image fullrun_ccd5_acisf10509_pi14-548_cl_sm2.00.img.gz, (0, 14) - (520, 934)
[Fri Oct 28 12:15:27 2011] Writing fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1.gif
[Fri Oct 28 12:15:27 2011] ../../acisf10509/products/events/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_src.evt and ../../acisf10509/products/events/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 28 12:15:27 2011] Size of ../../acisf10509/products/events/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1153 counts
[Fri Oct 28 12:15:27 2011] Mean chipx,y = (627.90, 994.40)
[Fri Oct 28 12:15:27 2011] Mean tdetx,y = (2460.90, 2696.40)
[Fri Oct 28 12:15:27 2011] chipx,y range = (538.00-708.00, 911.00-1023.00)
[Fri Oct 28 12:15:27 2011] Size of ../../acisf10509/products/events/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 921 counts
[Fri Oct 28 12:15:27 2011] ../../acisf10509/products/images/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_src.img and ../../acisf10509/products/images/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 28 12:15:27 2011] ../../acisf10509/products/spectra/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_src.pi and ../../acisf10509/products/spectra/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 28 12:15:30 2011] ../../acisf10509/products/lightcurves/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_src.lc and ../../acisf10509/products/lightcurves/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 28 12:15:30 2011] Keeping rmf generated by specextract
[Fri Oct 28 12:15:30 2011] 136.538
[Fri Oct 28 12:15:54 2011] Updating aperture counts using extracted products
[Fri Oct 28 12:15:54 2011] Error reading totcts from fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 28 12:15:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 12:15:54 2011] Using photon index=1.80, rate=0.244, arf fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 12:15:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 12:15:54 2011] Updating source flux to 5.8e-12
[Fri Oct 28 12:16:02 2011] Reading fit data from acisf10509/analysis//spectral/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 28 12:16:02 2011] Spectral fit parameter nH value = 7.71208e+22
[Fri Oct 28 12:16:02 2011] Spectral fit parameter PhoIndex value = 1.94548
[Fri Oct 28 12:16:02 2011] Failed to get F(0.3-8.0) from acisf10509/analysis//spectral/fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 12:16:02 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 12:16:02 2011] Using Nh = 7.7e+22, photon index=1.95, rate=0.244, arf fullrun_ccd5_acisf10509_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 12:16:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 12:16:02 2011] Updating source flux to 1e-11