[Fri Sep 30 00:24:03 2011] Detection parameters:
  Position = (504.1, 807.0) = 19 43 10.97 23 17 45.6
  Extent = 0.5" x 0.5", rotation angle = 116 degrees
  Source counts = 31.6 +/- 5.7
  Background counts = 0.4
  Rate = 0.02 +/- 0.003

[Fri Sep 30 00:24:05 2011] Off-axis axis estimate = 1.39'
[Fri Sep 30 00:24:46 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:24:46 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Sep 30 00:24:46 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.603
[Fri Sep 30 00:24:46 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Fri Sep 30 00:24:47 2011] fullrun_ccd7_acisf10502_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 00:24:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10502_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 00:24:47 2011] fullrun_ccd7_acisf10502_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 00:24:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10502_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 00:24:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10502_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10502_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:24:47 2011] fullrun_ccd7_acisf10502_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 00:24:48 2011] fullrun_ccd7_acisf10502_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 00:24:48 2011] Fit fullrun_ccd7_acisf10502_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 00:24:51 2011] Spatial fit model total counts = 34.533500, observed total counts = 34.000000
[Fri Sep 30 00:24:51 2011] Offset between fit and detection position for source 2 = 0.603124 pixels
[Fri Sep 30 00:24:51 2011] 34.971180 total counts/ 4.828380 bgd. counts: snr = 13.717750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.603124 pixels
  Position = (504.6, 807.3) = 19 43 10.98 23 17 45.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 30.1 +/- 5.9
  Background counts = 4.8
  Rate = 0.01 +/- 0.003
[Fri Sep 30 00:24:51 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:24:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:24:51 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:24:51 2011] Source does appear to be extended
[Fri Sep 30 00:24:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:25:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 00:25:14 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Fri Sep 30 00:25:14 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.052
[Fri Sep 30 00:25:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Fri Sep 30 00:25:14 2011] fullrun_ccd7_acisf10502_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 00:25:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10502_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 00:25:14 2011] fullrun_ccd7_acisf10502_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 00:25:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10502_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 00:25:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10502_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10502_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 00:25:15 2011] fullrun_ccd7_acisf10502_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 00:25:15 2011] fullrun_ccd7_acisf10502_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 00:25:15 2011] Fit fullrun_ccd7_acisf10502_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 00:25:21 2011] Spatial fit model total counts = 33.601600, observed total counts = 34.000000
[Fri Sep 30 00:25:21 2011] Offset between fit and detection position for source 2 = 0.026627 pixels
[Fri Sep 30 00:25:21 2011] 33.945120 total counts/ 4.122820 bgd. counts: snr = 14.687367
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.026627 pixels
  Position = (504.6, 807.3) = 19 43 10.97 23 17 45.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 29.8 +/- 5.8
  Background counts = 4.1
  Rate = 0.01 +/- 0.003
[Fri Sep 30 00:25:21 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 00:25:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 00:25:21 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 00:25:21 2011] Source does appear to be extended
[Fri Sep 30 00:25:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 00:26:02 2011] Not overwriting source region fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 30 00:26:02 2011] Extracting stamp from image fullrun_ccd7_acisf10502_pi14-548_cl_sm2.00.img.gz, (482, 785) - (527, 830)
[Fri Sep 30 00:26:02 2011] Writing fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2.gif
[Fri Sep 30 00:26:04 2011] ../../acisf10502/products/events/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_src.evt and ../../acisf10502/products/events/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 30 00:26:04 2011] Size of ../../acisf10502/products/events/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_src.evt.gz[events] = 31 counts
[Fri Sep 30 00:26:04 2011] Mean chipx,y = (323.65, 602.94)
[Fri Sep 30 00:26:04 2011] Mean tdetx,y = (4240.65, 2304.94)
[Fri Sep 30 00:26:04 2011] chipx,y range = (309.00-341.00, 586.00-619.00)
[Fri Sep 30 00:26:04 2011] Size of ../../acisf10502/products/events/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 5 counts
[Fri Sep 30 00:26:04 2011] ../../acisf10502/products/images/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_src.img and ../../acisf10502/products/images/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 30 00:26:04 2011] ../../acisf10502/products/spectra/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_src.pi and ../../acisf10502/products/spectra/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 30 00:26:04 2011] Not generating rmf since there are only 29 counts
[Fri Sep 30 00:26:09 2011] ../../acisf10502/products/lightcurves/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_src.lc and ../../acisf10502/products/lightcurves/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 30 00:26:57 2011] 234.649
[Fri Sep 30 00:26:58 2011] Updating aperture counts using extracted products
[Fri Sep 30 00:26:58 2011] Error reading totcts from fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 30 00:26:58 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 00:26:58 2011] Using photon index=1.80, rate=0.0145, arf fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 00:26:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 00:26:58 2011] Updating source flux to 1.8e-13
[Fri Sep 30 00:27:04 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 00:27:05 2011] acisf10502/analysis//spectral/fullrun_ccd7_acisf10502_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete