[Tue Sep 27 12:09:32 2011] Detection parameters:
  Position = (633.8, 979.1) = 14 31 34.61 32 27 34.3
  Extent = 1.0" x 0.8", rotation angle = 68 degrees
  Source counts = 33.5 +/- 5.9
  Background counts = 1.5
  Rate = 0.001 +/- 0.0002

[Tue Sep 27 12:09:33 2011] Off-axis axis estimate = 4.35'
[Tue Sep 27 12:10:36 2011] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 12:10:36 2011] Initial guess for spatial extent in simple fitting = 0.94"
[Tue Sep 27 12:10:36 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.857
[Tue Sep 27 12:10:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.94"
[Tue Sep 27 12:10:37 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src3.ximg exists
[Tue Sep 27 12:10:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 12:10:37 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Sep 27 12:10:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 12:10:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 12:10:37 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 12:10:37 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 12:10:37 2011] Fit fullrun_ccd6_acisf10496_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 12:10:46 2011] Spatial fit model total counts = 39.409100, observed total counts = 39.000000
[Tue Sep 27 12:10:46 2011] Offset between fit and detection position for source 4 = 0.917788 pixels
[Tue Sep 27 12:10:46 2011] 38.611280 total counts/ 8.345580 bgd. counts: snr = 10.476651
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.917788 pixels
  Position = (634.3, 979.8) = 14 31 34.61 32 27 34.4
  Extent = 1.1 (0.8-1.7)", rotation angle = 0
  Source counts = 30.3 +/- 6.2
  Background counts = 8.3
  Rate = 0.001 +/- 0.0002
[Tue Sep 27 12:10:46 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 12:10:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 12:10:46 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 12:10:46 2011] Source does appear to be extended
[Tue Sep 27 12:10:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 12:11:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 12:11:08 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Tue Sep 27 12:11:08 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.972
[Tue Sep 27 12:11:08 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.12"
[Tue Sep 27 12:11:08 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src3.ximg exists
[Tue Sep 27 12:11:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 12:11:08 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Sep 27 12:11:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 12:11:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 12:11:09 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 12:11:09 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 12:11:09 2011] Fit fullrun_ccd6_acisf10496_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 12:11:16 2011] Spatial fit model total counts = 39.305200, observed total counts = 39.000000
[Tue Sep 27 12:11:16 2011] Offset between fit and detection position for source 4 = 0.025253 pixels
[Tue Sep 27 12:11:16 2011] 38.471350 total counts/ 7.401150 bgd. counts: snr = 11.420745
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.025253 pixels
  Position = (634.3, 979.8) = 14 31 34.61 32 27 34.4
  Extent = 1.2 (0.8-1.7)", rotation angle = 0
  Source counts = 31.1 +/- 6.2
  Background counts = 7.4
  Rate = 0.001 +/- 0.0002
[Tue Sep 27 12:11:16 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 12:11:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 12:11:16 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 12:11:16 2011] Source does appear to be extended
[Tue Sep 27 12:11:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 12:12:36 2011] Not overwriting source region fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_src.reg
[Tue Sep 27 12:12:36 2011] Extracting stamp from image fullrun_ccd6_acisf10496_pi14-548_cl_sm2.00.img.gz, (581, 926) - (688, 1033)
[Tue Sep 27 12:12:36 2011] Writing fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4.gif
[Tue Sep 27 12:12:46 2011] ../../acisf10496/products/events/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_src.evt and ../../acisf10496/products/events/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Sep 27 12:12:46 2011] Size of ../../acisf10496/products/events/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_src.evt.gz[events] = 39 counts
[Tue Sep 27 12:12:46 2011] Mean chipx,y = (735.13, 319.18)
[Tue Sep 27 12:12:46 2011] Mean tdetx,y = (3610.13, 2021.18)
[Tue Sep 27 12:12:46 2011] chipx,y range = (710.00-755.00, 302.00-341.00)
[Tue Sep 27 12:12:46 2011] Size of ../../acisf10496/products/events/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 25 counts
[Tue Sep 27 12:12:46 2011] ../../acisf10496/products/images/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_src.img and ../../acisf10496/products/images/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Sep 27 12:12:46 2011] ../../acisf10496/products/spectra/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_src.pi and ../../acisf10496/products/spectra/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Sep 27 12:12:46 2011] Not generating rmf since there are only 31 counts
[Tue Sep 27 12:12:51 2011] ../../acisf10496/products/lightcurves/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_src.lc and ../../acisf10496/products/lightcurves/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Sep 27 12:13:31 2011] 192.21
[Tue Sep 27 12:16:48 2011] Updating aperture counts using extracted products
[Tue Sep 27 12:16:48 2011] Error reading totcts from fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Sep 27 12:16:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 12:16:48 2011] Using photon index=1.80, rate=0.00108, arf fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src4.arf
[Tue Sep 27 12:16:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 12:16:48 2011] Updating source flux to 1.3e-14
[Tue Sep 27 12:16:55 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting