[Tue Sep 27 12:09:32 2011] Detection parameters:
  Position = (1052.5, 331.5) = 14 31 18.34 32 22 15.7
  Extent = 1.0" x 0.9", rotation angle = 137 degrees
  Source counts = 60.8 +/- 8.4
  Background counts = 10.2
  Rate = 0.002 +/- 0.0003

[Tue Sep 27 12:09:33 2011] Off-axis axis estimate = 8.25'
[Tue Sep 27 12:10:36 2011] Using EEF radius (= 3.01 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 12:10:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 12:10:36 2011] Initial guess for spatial extent in simple fitting = 3.01"
[Tue Sep 27 12:10:36 2011] source mask rpix=6.1, npix_max = 174, mask sum = 169, frac = 0.967
[Tue Sep 27 12:10:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.01"
[Tue Sep 27 12:10:37 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 12:10:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 12:10:37 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 12:10:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 12:10:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10496_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 12:10:37 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 12:10:37 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 12:10:37 2011] Fit fullrun_ccd6_acisf10496_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 12:10:46 2011] Spatial fit model total counts = 145.467000, observed total counts = 144.000000
[Tue Sep 27 12:10:46 2011] Offset between fit and detection position for source 1 = 4.272397 pixels
[Tue Sep 27 12:10:46 2011] 145.479800 total counts/ 42.889800 bgd. counts: snr = 15.664914
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.272397 pixels
  Position = (1053.6, 327.4) = 14 31 18.31 32 22 13.4
  Extent = 3.4 (3.0-4.0)", rotation angle = 0
  Source counts = 102.6 +/- 12.1
  Background counts = 42.9
  Rate = 0.004 +/- 0.0004
[Tue Sep 27 12:10:46 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 12:10:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 12:10:46 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 12:10:46 2011] Source does appear to be extended
[Tue Sep 27 12:10:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 12:11:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 12:11:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 12:11:08 2011] Initial guess for spatial extent in simple fitting = 3.42"
[Tue Sep 27 12:11:08 2011] source mask rpix=7.0, npix_max = 222, mask sum = 225, frac = 1.012
[Tue Sep 27 12:11:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.42"
[Tue Sep 27 12:11:08 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 12:11:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 12:11:08 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 12:11:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 12:11:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10496_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 12:11:09 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 12:11:09 2011] fullrun_ccd6_acisf10496_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 12:11:09 2011] Fit fullrun_ccd6_acisf10496_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 12:11:16 2011] Spatial fit model total counts = 154.156000, observed total counts = 152.000000
[Tue Sep 27 12:11:16 2011] Offset between fit and detection position for source 1 = 0.425202 pixels
[Tue Sep 27 12:11:16 2011] 154.209900 total counts/ 50.593900 bgd. counts: snr = 14.567256
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.425202 pixels
  Position = (1053.2, 327.6) = 14 31 18.33 32 22 13.6
  Extent = 3.5 (3.0-4.2)", rotation angle = 0
  Source counts = 103.6 +/- 12.4
  Background counts = 50.6
  Rate = 0.004 +/- 0.0004
[Tue Sep 27 12:11:16 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 12:11:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 12:11:16 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 12:11:16 2011] Source does appear to be extended
[Tue Sep 27 12:11:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 12:12:36 2011] Not overwriting source region fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 12:12:36 2011] Extracting stamp from image fullrun_ccd6_acisf10496_pi14-548_cl_sm2.00.img.gz, (895, 170) - (1211, 486)
[Tue Sep 27 12:12:36 2011] Writing fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 12:12:37 2011] ../../acisf10496/products/events/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_src.evt and ../../acisf10496/products/events/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 12:12:37 2011] Size of ../../acisf10496/products/events/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_src.evt.gz[events] = 144 counts
[Tue Sep 27 12:12:37 2011] Mean chipx,y = (353.81, 992.14)
[Tue Sep 27 12:12:37 2011] Mean tdetx,y = (3228.81, 2694.14)
[Tue Sep 27 12:12:37 2011] chipx,y range = (320.00-392.00, 955.00-1022.00)
[Tue Sep 27 12:12:37 2011] Size of ../../acisf10496/products/events/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 185 counts
[Tue Sep 27 12:12:37 2011] ../../acisf10496/products/images/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_src.img and ../../acisf10496/products/images/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 12:12:37 2011] ../../acisf10496/products/spectra/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_src.pi and ../../acisf10496/products/spectra/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 12:12:41 2011] ../../acisf10496/products/lightcurves/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_src.lc and ../../acisf10496/products/lightcurves/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 12:13:30 2011] Keeping rmf generated by specextract
[Tue Sep 27 12:13:31 2011] 168.682
[Tue Sep 27 12:16:48 2011] Updating aperture counts using extracted products
[Tue Sep 27 12:16:48 2011] Error reading totcts from fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 12:16:48 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 12:16:48 2011] Using photon index=1.80, rate=0.0036, arf fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 12:16:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 12:16:48 2011] Updating source flux to 5e-14
[Tue Sep 27 12:17:01 2011] Reading fit data from acisf10496/analysis//spectral/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_pl.csv
[Tue Sep 27 12:17:01 2011] Spectral fit parameter nH value = 2.24683e+21
[Tue Sep 27 12:17:01 2011] Spectral fit parameter PhoIndex value = 1.98987
[Tue Sep 27 12:17:01 2011] Failed to get F(0.3-8.0) from acisf10496/analysis//spectral/fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 12:17:01 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 12:17:01 2011] Using Nh = 2.2e+21, photon index=1.99, rate=0.0036, arf fullrun_ccd6_acisf10496_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 12:17:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 12:17:01 2011] Updating source flux to 4.4e-14