[Sat Oct  1 11:14:24 2011] Detection parameters:
  Position = (929.3, 1098.4) = 14 27 14.66 34 8 46.2
  Extent = 0.6" x 0.5", rotation angle = 96 degrees
  Source counts = 87.0 +/- 9.4
  Background counts = 2.0
  Rate = 0.003 +/- 0.0003

[Sat Oct  1 11:14:25 2011] Off-axis axis estimate = 2.52'
[Sat Oct  1 11:15:29 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 11:15:29 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Sat Oct  1 11:15:29 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.991
[Sat Oct  1 11:15:29 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.50"
[Sat Oct  1 11:15:30 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src2.ximg exists
[Sat Oct  1 11:15:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src2.csv
[Sat Oct  1 11:15:30 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src2_1.ximg exists
[Sat Oct  1 11:15:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src2.csv
[Sat Oct  1 11:15:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:15:30 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat Oct  1 11:15:30 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Oct  1 11:15:30 2011] Fit fullrun_ccd6_acisf10495_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Oct  1 11:15:38 2011] Spatial fit model total counts = 88.526500, observed total counts = 90.000000
[Sat Oct  1 11:15:38 2011] Offset between fit and detection position for source 2 = 0.772925 pixels
[Sat Oct  1 11:15:38 2011] 88.088090 total counts/ 2.995990 bgd. counts: snr = 49.160814
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.772925 pixels
  Position = (929.8, 1099.0) = 14 27 14.66 34 8 46.3
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 85.1 +/- 9.4
  Background counts = 3.0
  Rate = 0.003 +/- 0.0003
[Sat Oct  1 11:15:38 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 11:15:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 11:15:38 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 11:15:38 2011] Source does appear to be extended
[Sat Oct  1 11:15:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 11:15:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 11:15:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 11:15:58 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Oct  1 11:15:58 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.256
[Sat Oct  1 11:15:58 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.63"
[Sat Oct  1 11:15:58 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src2.ximg exists
[Sat Oct  1 11:15:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src2.csv
[Sat Oct  1 11:15:58 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src2_1.ximg exists
[Sat Oct  1 11:15:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src2.csv
[Sat Oct  1 11:15:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:15:59 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat Oct  1 11:15:59 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Oct  1 11:15:59 2011] Fit fullrun_ccd6_acisf10495_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct  1 11:16:05 2011] Spatial fit model total counts = 89.224900, observed total counts = 91.000000
[Sat Oct  1 11:16:05 2011] Offset between fit and detection position for source 2 = 0.012526 pixels
[Sat Oct  1 11:16:05 2011] 89.221670 total counts/ 5.422570 bgd. counts: snr = 35.986265
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.012526 pixels
  Position = (929.8, 1099.0) = 14 27 14.66 34 8 46.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 83.8 +/- 9.4
  Background counts = 5.4
  Rate = 0.003 +/- 0.0003
[Sat Oct  1 11:16:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 11:16:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 11:16:05 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 11:16:05 2011] Source does appear to be extended
[Sat Oct  1 11:16:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 11:17:13 2011] Not overwriting source region fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_src.reg
[Sat Oct  1 11:17:13 2011] Extracting stamp from image fullrun_ccd6_acisf10495_pi14-548_cl_sm2.00.img.gz, (901, 1070) - (959, 1128)
[Sat Oct  1 11:17:13 2011] Writing fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2.gif
[Sat Oct  1 11:17:16 2011] ../../acisf10495/products/events/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_src.evt and ../../acisf10495/products/events/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct  1 11:17:16 2011] Size of ../../acisf10495/products/events/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_src.evt.gz[events] = 88 counts
[Sat Oct  1 11:17:16 2011] Mean chipx,y = (937.17, 435.56)
[Sat Oct  1 11:17:16 2011] Mean tdetx,y = (3812.17, 2137.56)
[Sat Oct  1 11:17:16 2011] chipx,y range = (919.00-956.00, 416.00-456.00)
[Sat Oct  1 11:17:16 2011] Size of ../../acisf10495/products/events/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 17 counts
[Sat Oct  1 11:17:16 2011] ../../acisf10495/products/images/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_src.img and ../../acisf10495/products/images/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct  1 11:17:16 2011] ../../acisf10495/products/spectra/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_src.pi and ../../acisf10495/products/spectra/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct  1 11:17:16 2011] Not generating rmf since there are only 83 counts
[Sat Oct  1 11:17:21 2011] ../../acisf10495/products/lightcurves/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_src.lc and ../../acisf10495/products/lightcurves/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct  1 11:18:03 2011] 206.745
[Sat Oct  1 11:19:36 2011] Updating aperture counts using extracted products
[Sat Oct  1 11:19:36 2011] Error reading totcts from fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct  1 11:19:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 11:19:36 2011] Using photon index=1.80, rate=0.00273, arf fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src2.arf
[Sat Oct  1 11:19:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 11:19:36 2011] Updating source flux to 3e-14
[Sat Oct  1 11:19:43 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting