[Sat Oct  1 11:14:24 2011] Detection parameters:
  Position = (937.5, 1128.6) = 14 27 14.33 34 9 1.1
  Extent = 0.6" x 0.5", rotation angle = 83 degrees
  Source counts = 101.4 +/- 10.1
  Background counts = 1.6
  Rate = 0.003 +/- 0.0003

[Sat Oct  1 11:14:25 2011] Off-axis axis estimate = 2.32'
[Sat Oct  1 11:15:29 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 11:15:29 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sat Oct  1 11:15:29 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.073
[Sat Oct  1 11:15:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.47"
[Sat Oct  1 11:15:30 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 11:15:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 11:15:30 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 11:15:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 11:15:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10495_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:15:30 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 11:15:30 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 11:15:30 2011] Fit fullrun_ccd6_acisf10495_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 11:15:38 2011] Spatial fit model total counts = 104.450000, observed total counts = 103.000000
[Sat Oct  1 11:15:38 2011] Offset between fit and detection position for source 1 = 0.726514 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.726514 pixels
  Position = (938.0, 1129.1) = 14 27 14.33 34 9 1.1
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 104.5 +/- 10.2
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Sat Oct  1 11:15:38 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 11:15:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 11:15:38 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 11:15:38 2011] Source does appear to be extended
[Sat Oct  1 11:15:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 11:15:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 11:15:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 11:15:58 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sat Oct  1 11:15:58 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.431
[Sat Oct  1 11:15:58 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.58"
[Sat Oct  1 11:15:58 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 11:15:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 11:15:58 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 11:15:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 11:15:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10495_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:15:59 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 11:15:59 2011] fullrun_ccd6_acisf10495_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 11:15:59 2011] Fit fullrun_ccd6_acisf10495_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 11:16:05 2011] Spatial fit model total counts = 105.135000, observed total counts = 103.000000
[Sat Oct  1 11:16:05 2011] Offset between fit and detection position for source 1 = 0.010020 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.010020 pixels
  Position = (938.0, 1129.1) = 14 27 14.33 34 9 1.1
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 105.1 +/- 10.3
  Background counts = 0.0
  Rate = 0.003 +/- 0.0003
[Sat Oct  1 11:16:05 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 11:16:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 11:16:05 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 11:16:05 2011] Source does appear to be extended
[Sat Oct  1 11:16:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 11:17:13 2011] Not overwriting source region fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  1 11:17:13 2011] Extracting stamp from image fullrun_ccd6_acisf10495_pi14-548_cl_sm2.00.img.gz, (911, 1103) - (965, 1156)
[Sat Oct  1 11:17:13 2011] Writing fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1.gif
[Sat Oct  1 11:17:13 2011] ../../acisf10495/products/events/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_src.evt and ../../acisf10495/products/events/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  1 11:17:13 2011] Size of ../../acisf10495/products/events/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_src.evt.gz[events] = 102 counts
[Sat Oct  1 11:17:13 2011] Mean chipx,y = (966.15, 423.72)
[Sat Oct  1 11:17:13 2011] Mean tdetx,y = (3841.15, 2125.72)
[Sat Oct  1 11:17:13 2011] chipx,y range = (947.00-984.00, 405.00-443.00)
[Sat Oct  1 11:17:13 2011] Size of ../../acisf10495/products/events/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 5 counts
[Sat Oct  1 11:17:13 2011] ../../acisf10495/products/images/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_src.img and ../../acisf10495/products/images/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  1 11:17:13 2011] ../../acisf10495/products/spectra/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_src.pi and ../../acisf10495/products/spectra/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct  1 11:17:16 2011] ../../acisf10495/products/lightcurves/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_src.lc and ../../acisf10495/products/lightcurves/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  1 11:18:03 2011] Keeping rmf generated by specextract
[Sat Oct  1 11:18:03 2011] 207.997
[Sat Oct  1 11:19:36 2011] Updating aperture counts using extracted products
[Sat Oct  1 11:19:36 2011] Error reading totcts from fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct  1 11:19:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 11:19:36 2011] Using photon index=1.80, rate=0.00342, arf fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 11:19:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 11:19:36 2011] Updating source flux to 3.7e-14
[Sat Oct  1 11:19:50 2011] Reading fit data from acisf10495/analysis//spectral/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct  1 11:19:50 2011] Spectral fit parameter nH value = 4.85572e+14
[Sat Oct  1 11:19:50 2011] Spectral fit parameter PhoIndex value = 1.14515
[Sat Oct  1 11:19:50 2011] Failed to get F(0.3-8.0) from acisf10495/analysis//spectral/fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 11:19:50 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 11:19:50 2011] Using Nh = 4.9e+14, photon index=1.15, rate=0.00342, arf fullrun_ccd6_acisf10495_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 11:19:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 11:19:50 2011] Updating source flux to 4.7e-14