[Wed Oct 19 01:23:19 2011] Detection parameters:
  Position = (783.4, 976.0) = 5 13 1.28 60 30 2.5
  Extent = 0.6" x 0.5", rotation angle = 111 degrees
  Source counts = 14.6 +/- 4.1
  Background counts = 2.4
  Rate = 0.0001 +/- 4e-05

[Wed Oct 19 01:23:20 2011] Off-axis axis estimate = 2.07'
[Wed Oct 19 01:24:32 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:24:32 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Oct 19 01:24:32 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.777
[Wed Oct 19 01:24:32 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.44"
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src13.ximg exists
[Wed Oct 19 01:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src13.csv
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src13_1.ximg exists
[Wed Oct 19 01:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src13.csv
[Wed Oct 19 01:24:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Oct 19 01:24:33 2011] Fit fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Oct 19 01:24:52 2011] Spatial fit model total counts = 23.136900, observed total counts = 24.000000
[Wed Oct 19 01:24:52 2011] Offset between fit and detection position for source 28 = 0.611077 pixels
[Wed Oct 19 01:24:52 2011] 23.893650 total counts/ 9.956450 bgd. counts: snr = 4.416958
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.611077 pixels
  Position = (783.9, 976.3) = 5 13 1.27 60 30 2.4
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 13.9 +/- 4.9
  Background counts = 10.0
  Rate = 0.0001 +/- 5e-05
[Wed Oct 19 01:24:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:24:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:24:52 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:24:52 2011] Source does appear to be extended
[Wed Oct 19 01:24:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:25:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:25:18 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Oct 19 01:25:18 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.914
[Wed Oct 19 01:25:18 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.65"
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src13.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src13.csv
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src13_1.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src13.csv
[Wed Oct 19 01:25:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Oct 19 01:25:19 2011] Fit fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Oct 19 01:25:35 2011] Spatial fit model total counts = 23.455400, observed total counts = 24.000000
[Wed Oct 19 01:25:35 2011] Offset between fit and detection position for source 28 = 0.020642 pixels
[Wed Oct 19 01:25:35 2011] 24.272800 total counts/ 10.065400 bgd. counts: snr = 4.478155
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.020642 pixels
  Position = (783.9, 976.3) = 5 13 1.27 60 30 2.4
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 14.2 +/- 4.9
  Background counts = 10.1
  Rate = 0.0001 +/- 5e-05
[Wed Oct 19 01:25:35 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:25:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:25:35 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:25:35 2011] Source does appear to be extended
[Wed Oct 19 01:25:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:30:07 2011] Not overwriting source region fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_src.reg
[Wed Oct 19 01:30:07 2011] Extracting stamp from image fullrun_ccd3_acisf10489_pi14-548_cl_sm2.00.img.gz, (755, 947) - (813, 1006)
[Wed Oct 19 01:30:07 2011] Writing fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28.gif
[Wed Oct 19 01:30:40 2011] ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_src.evt and ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Wed Oct 19 01:30:40 2011] Size of ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_src.evt.gz[events] = 18 counts
[Wed Oct 19 01:30:40 2011] Mean chipx,y = (961.39, 776.06)
[Wed Oct 19 01:30:40 2011] Mean tdetx,y = (4355.94, 4022.39)
[Wed Oct 19 01:30:40 2011] chipx,y range = (943.00-977.00, 756.00-795.00)
[Wed Oct 19 01:30:40 2011] Size of ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 27 counts
[Wed Oct 19 01:30:40 2011] ../../acisf10489/products/images/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_src.img and ../../acisf10489/products/images/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Wed Oct 19 01:30:40 2011] ../../acisf10489/products/spectra/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_src.pi and ../../acisf10489/products/spectra/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Wed Oct 19 01:30:40 2011] Not generating rmf since there are only 14 counts
[Wed Oct 19 01:30:43 2011] ../../acisf10489/products/lightcurves/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_src.lc and ../../acisf10489/products/lightcurves/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Wed Oct 19 01:31:12 2011] 202.336
[Wed Oct 19 01:31:18 2011] Updating aperture counts using extracted products
[Wed Oct 19 01:31:18 2011] Error reading totcts from fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28_src.pi.gz
[Wed Oct 19 01:31:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 01:31:18 2011] Using photon index=1.80, rate=0.000144, arf fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src28.arf
[Wed Oct 19 01:31:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 01:31:18 2011] Updating source flux to 1.6e-15
[Wed Oct 19 01:31:31 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting