[Wed Oct 19 01:23:19 2011] Detection parameters:
  Position = (964.3, 839.9) = 5 12 49.22 60 28 55.6
  Extent = 0.7" x 0.5", rotation angle = 13 degrees
  Source counts = 10.7 +/- 3.6
  Background counts = 2.3
  Rate = 0.0001 +/- 4e-05

[Wed Oct 19 01:23:20 2011] Off-axis axis estimate = 1.21'
[Wed Oct 19 01:24:32 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:24:32 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 19 01:24:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.920
[Wed Oct 19 01:24:32 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.38"
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src17.ximg exists
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src17_1.ximg exists
[Wed Oct 19 01:24:33 2011] Fit fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src17 appears to have run properly
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Oct 19 01:24:33 2011] Fit fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Oct 19 01:24:52 2011] Spatial fit model total counts = 18.937700, observed total counts = 20.000000
[Wed Oct 19 01:24:52 2011] Offset between fit and detection position for source 23 = 0.895345 pixels
[Wed Oct 19 01:24:52 2011] 19.276450 total counts/ 8.158450 bgd. counts: snr = 3.892448
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.895345 pixels
  Position = (965.1, 840.4) = 5 12 49.20 60 28 55.6
  Extent = 0.6 (0.1-1.0)", rotation angle = 0
  Source counts = 11.1 +/- 4.4
  Background counts = 8.2
  Rate = 0.0001 +/- 4e-05
[Wed Oct 19 01:24:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:24:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:24:52 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:24:52 2011] Source does appear to be extended
[Wed Oct 19 01:24:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:25:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:25:18 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Oct 19 01:25:18 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.976
[Wed Oct 19 01:25:18 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.62"
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src15.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src15.csv
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src15_1.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src15.csv
[Wed Oct 19 01:25:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src15.csv
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src15.csv
[Wed Oct 19 01:25:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:25:35 2011] Spatial fit model total counts = 15.288600, observed total counts = 19.000000
[Wed Oct 19 01:25:35 2011] Offset between fit and detection position for source 23 = 0.068507 pixels
[Wed Oct 19 01:25:35 2011] 15.919920 total counts/ 3.317020 bgd. counts: snr = 6.919846
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.068507 pixels
  Position = (965.0, 840.4) = 5 12 49.21 60 28 55.6
  Extent = 0.8 (0.2-1.1)", rotation angle = 0
  Source counts = 12.6 +/- 4.0
  Background counts = 3.3
  Rate = 0.0001 +/- 4e-05
[Wed Oct 19 01:25:35 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:25:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:25:35 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:25:35 2011] Source does appear to be extended
[Wed Oct 19 01:25:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:30:07 2011] Not overwriting source region fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_src.reg
[Wed Oct 19 01:30:07 2011] Extracting stamp from image fullrun_ccd3_acisf10489_pi14-548_cl_sm2.00.img.gz, (931, 806) - (999, 875)
[Wed Oct 19 01:30:07 2011] Writing fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23.gif
[Wed Oct 19 01:30:48 2011] ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_src.evt and ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed Oct 19 01:30:48 2011] Size of ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_src.evt.gz[events] = 14 counts
[Wed Oct 19 01:30:48 2011] Mean chipx,y = (814.50, 965.07)
[Wed Oct 19 01:30:48 2011] Mean tdetx,y = (4166.93, 3875.50)
[Wed Oct 19 01:30:48 2011] chipx,y range = (805.00-834.00, 940.00-971.00)
[Wed Oct 19 01:30:48 2011] Size of ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 37 counts
[Wed Oct 19 01:30:49 2011] ../../acisf10489/products/images/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_src.img and ../../acisf10489/products/images/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed Oct 19 01:30:49 2011] ../../acisf10489/products/spectra/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_src.pi and ../../acisf10489/products/spectra/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Wed Oct 19 01:30:49 2011] Not generating rmf since there are only 12 counts
[Wed Oct 19 01:30:51 2011] ../../acisf10489/products/lightcurves/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_src.lc and ../../acisf10489/products/lightcurves/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Wed Oct 19 01:31:12 2011] 199.998
[Wed Oct 19 01:31:18 2011] Updating aperture counts using extracted products
[Wed Oct 19 01:31:18 2011] Error reading totcts from fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23_src.pi.gz
[Wed Oct 19 01:31:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 01:31:18 2011] Using photon index=1.80, rate=0.000127, arf fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src23.arf
[Wed Oct 19 01:31:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 01:31:18 2011] Updating source flux to 1.4e-15
[Wed Oct 19 01:31:31 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting