[Wed Oct 19 01:23:18 2011] Detection parameters:
  Position = (950.5, 575.2) = 5 12 50.13 60 26 45.4
  Extent = 0.7" x 0.5", rotation angle = 137 degrees
  Source counts = 18.7 +/- 4.6
  Background counts = 2.3
  Rate = 0.0002 +/- 5e-05

[Wed Oct 19 01:23:20 2011] Off-axis axis estimate = 3.30'
[Wed Oct 19 01:24:32 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:24:32 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Oct 19 01:24:32 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.914
[Wed Oct 19 01:24:32 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.65"
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src9.ximg exists
[Wed Oct 19 01:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src9.csv
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src9_1.ximg exists
[Wed Oct 19 01:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src9.csv
[Wed Oct 19 01:24:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Oct 19 01:24:33 2011] Fit fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Oct 19 01:24:52 2011] Spatial fit model total counts = 26.992700, observed total counts = 27.000000
[Wed Oct 19 01:24:52 2011] Offset between fit and detection position for source 11 = 0.931579 pixels
[Wed Oct 19 01:24:52 2011] 26.795390 total counts/ 9.082790 bgd. counts: snr = 5.877230
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.931579 pixels
  Position = (951.4, 575.4) = 5 12 50.11 60 26 45.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 17.7 +/- 5.2
  Background counts = 9.1
  Rate = 0.0002 +/- 5e-05
[Wed Oct 19 01:24:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:24:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:24:52 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:24:52 2011] Source does appear to be extended
[Wed Oct 19 01:24:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:25:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:25:18 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Wed Oct 19 01:25:18 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.921
[Wed Oct 19 01:25:18 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.52"
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src9.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src9.csv
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src9_1.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src9.csv
[Wed Oct 19 01:25:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Oct 19 01:25:19 2011] Fit fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Oct 19 01:25:35 2011] Spatial fit model total counts = 26.000000, observed total counts = 26.000000
[Wed Oct 19 01:25:35 2011] Offset between fit and detection position for source 11 = 0.120891 pixels
[Wed Oct 19 01:25:35 2011] 25.703020 total counts/ 7.166420 bgd. counts: snr = 6.924349
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.120891 pixels
  Position = (951.3, 575.4) = 5 12 50.11 60 26 45.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 18.5 +/- 5.1
  Background counts = 7.2
  Rate = 0.0002 +/- 5e-05
[Wed Oct 19 01:25:35 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:25:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:25:35 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:25:35 2011] Source does appear to be extended
[Wed Oct 19 01:25:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:30:06 2011] Not overwriting source region fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_src.reg
[Wed Oct 19 01:30:06 2011] Extracting stamp from image fullrun_ccd3_acisf10489_pi14-548_cl_sm2.00.img.gz, (925, 549) - (978, 602)
[Wed Oct 19 01:30:06 2011] Writing fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11.gif
[Wed Oct 19 01:30:30 2011] ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_src.evt and ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed Oct 19 01:30:30 2011] Size of ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_src.evt.gz[events] = 20 counts
[Wed Oct 19 01:30:30 2011] Mean chipx,y = (555.50, 941.55)
[Wed Oct 19 01:30:30 2011] Mean tdetx,y = (4190.45, 3616.50)
[Wed Oct 19 01:30:30 2011] chipx,y range = (543.00-574.00, 920.00-956.00)
[Wed Oct 19 01:30:30 2011] Size of ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 22 counts
[Wed Oct 19 01:30:30 2011] ../../acisf10489/products/images/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_src.img and ../../acisf10489/products/images/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed Oct 19 01:30:30 2011] ../../acisf10489/products/spectra/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_src.pi and ../../acisf10489/products/spectra/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed Oct 19 01:30:30 2011] Not generating rmf since there are only 18 counts
[Wed Oct 19 01:30:32 2011] ../../acisf10489/products/lightcurves/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_src.lc and ../../acisf10489/products/lightcurves/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed Oct 19 01:31:12 2011] 188.874
[Wed Oct 19 01:31:18 2011] Updating aperture counts using extracted products
[Wed Oct 19 01:31:18 2011] Error reading totcts from fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Oct 19 01:31:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 01:31:18 2011] Using photon index=1.80, rate=0.000188, arf fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src11.arf
[Wed Oct 19 01:31:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 01:31:18 2011] Updating source flux to 2.2e-15
[Wed Oct 19 01:31:31 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting