[Wed Oct 19 01:23:18 2011] Detection parameters:
  Position = (839.4, 560.8) = 5 12 57.52 60 26 38.2
  Extent = 0.5" x 0.5", rotation angle = 14 degrees
  Source counts = 10.5 +/- 3.5
  Background counts = 1.5
  Rate = 0.0001 +/- 4e-05

[Wed Oct 19 01:23:20 2011] Off-axis axis estimate = 3.72'
[Wed Oct 19 01:24:32 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:24:32 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Wed Oct 19 01:24:32 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.979
[Wed Oct 19 01:24:32 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.75"
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src19.ximg exists
[Wed Oct 19 01:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src19.csv
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src19_1.ximg exists
[Wed Oct 19 01:24:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src19.csv
[Wed Oct 19 01:24:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10489_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed Oct 19 01:24:33 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Oct 19 01:24:33 2011] Fit fullrun_ccd3_acisf10489_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Oct 19 01:24:52 2011] Spatial fit model total counts = 17.999700, observed total counts = 18.000000
[Wed Oct 19 01:24:52 2011] Offset between fit and detection position for source 10 = 0.692114 pixels
[Wed Oct 19 01:24:52 2011] 18.168590 total counts/ 6.705090 bgd. counts: snr = 4.427055
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.692114 pixels
  Position = (839.9, 561.2) = 5 12 57.52 60 26 38.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 11.5 +/- 4.3
  Background counts = 6.7
  Rate = 0.0001 +/- 4e-05
[Wed Oct 19 01:24:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:24:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:24:52 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:24:52 2011] Source does appear to be extended
[Wed Oct 19 01:24:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:25:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:25:18 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Wed Oct 19 01:25:18 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.929
[Wed Oct 19 01:25:18 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.52"
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src17.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src17.csv
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src17_1.ximg exists
[Wed Oct 19 01:25:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src17.csv
[Wed Oct 19 01:25:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10489_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Wed Oct 19 01:25:19 2011] fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Oct 19 01:25:20 2011] Fit fullrun_ccd3_acisf10489_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Oct 19 01:25:35 2011] Spatial fit model total counts = 17.982400, observed total counts = 18.000000
[Wed Oct 19 01:25:35 2011] Offset between fit and detection position for source 10 = 0.008842 pixels
[Wed Oct 19 01:25:35 2011] 17.825680 total counts/ 6.351780 bgd. counts: snr = 4.552640
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.008842 pixels
  Position = (839.9, 561.2) = 5 12 57.52 60 26 38.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 11.5 +/- 4.2
  Background counts = 6.4
  Rate = 0.0001 +/- 4e-05
[Wed Oct 19 01:25:35 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:25:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:25:35 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:25:35 2011] Source does appear to be extended
[Wed Oct 19 01:25:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:30:07 2011] Not overwriting source region fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_src.reg
[Wed Oct 19 01:30:07 2011] Extracting stamp from image fullrun_ccd3_acisf10489_pi14-548_cl_sm2.00.img.gz, (817, 538) - (863, 584)
[Wed Oct 19 01:30:07 2011] Writing fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10.gif
[Wed Oct 19 01:30:54 2011] ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_src.evt and ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Oct 19 01:30:54 2011] Size of ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_src.evt.gz[events] = 12 counts
[Wed Oct 19 01:30:54 2011] Mean chipx,y = (547.75, 824.08)
[Wed Oct 19 01:30:54 2011] Mean tdetx,y = (4307.92, 3608.75)
[Wed Oct 19 01:30:54 2011] chipx,y range = (528.00-561.00, 811.00-844.00)
[Wed Oct 19 01:30:54 2011] Size of ../../acisf10489/products/events/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 19 counts
[Wed Oct 19 01:30:54 2011] ../../acisf10489/products/images/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_src.img and ../../acisf10489/products/images/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Oct 19 01:30:54 2011] ../../acisf10489/products/spectra/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_src.pi and ../../acisf10489/products/spectra/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Oct 19 01:30:54 2011] Not generating rmf since there are only 11 counts
[Wed Oct 19 01:30:56 2011] ../../acisf10489/products/lightcurves/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_src.lc and ../../acisf10489/products/lightcurves/fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Oct 19 01:31:12 2011] 183.277
[Wed Oct 19 01:31:18 2011] Updating aperture counts using extracted products
[Wed Oct 19 01:31:18 2011] Error reading totcts from fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Oct 19 01:31:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 01:31:18 2011] Using photon index=1.80, rate=0.000116, arf fullrun_ccd3_acisf10489_pi14-548_pass1_cl_src10.arf
[Wed Oct 19 01:31:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 01:31:18 2011] Updating source flux to 1.4e-15
[Wed Oct 19 01:31:31 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting