[Wed Oct 19 01:23:15 2011] Detection parameters:
  Position = (243.1, 732.6) = 5 12 27.81 60 28 5.7
  Extent = 0.8" x 0.6", rotation angle = 60 degrees
  Source counts = 13.4 +/- 4.0
  Background counts = 2.6
  Rate = 0.0001 +/- 4e-05

[Wed Oct 19 01:23:18 2011] Off-axis axis estimate = 2.79'
[Wed Oct 19 01:24:30 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:24:30 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Wed Oct 19 01:24:30 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.176
[Wed Oct 19 01:24:30 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.54"
[Wed Oct 19 01:24:31 2011] fullrun_ccd2_acisf10489_pi14-548_cl_pass0_src27.ximg exists
[Wed Oct 19 01:24:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10489_pi14-548_cl_pass0_src27.csv
[Wed Oct 19 01:24:31 2011] fullrun_ccd2_acisf10489_pi14-548_cl_pass0_src27_1.ximg exists
[Wed Oct 19 01:24:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10489_pi14-548_cl_pass0_src27.csv
[Wed Oct 19 01:24:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10489_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10489_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:24:32 2011] fullrun_ccd2_acisf10489_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Wed Oct 19 01:24:32 2011] fullrun_ccd2_acisf10489_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Oct 19 01:24:32 2011] Fit fullrun_ccd2_acisf10489_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Oct 19 01:24:49 2011] Spatial fit model total counts = 21.744300, observed total counts = 22.000000
[Wed Oct 19 01:24:49 2011] Offset between fit and detection position for source 16 = 0.657283 pixels
[Wed Oct 19 01:24:49 2011] 22.402400 total counts/ 11.758800 bgd. counts: snr = 3.103895
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.657283 pixels
  Position = (243.6, 733.0) = 5 12 27.80 60 28 5.6
  Extent = 0.5 (0.2-0.9)", rotation angle = 0
  Source counts = 10.6 +/- 4.7
  Background counts = 11.8
  Rate = 0.0001 +/- 5e-05
[Wed Oct 19 01:24:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:24:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:24:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:24:49 2011] Source does appear to be extended
[Wed Oct 19 01:24:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:25:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:25:16 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Wed Oct 19 01:25:16 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.964
[Wed Oct 19 01:25:16 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.51"
[Wed Oct 19 01:25:17 2011] fullrun_ccd2_acisf10489_pi14-548_cl_pass1_src25.ximg exists
[Wed Oct 19 01:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10489_pi14-548_cl_pass1_src25.csv
[Wed Oct 19 01:25:17 2011] fullrun_ccd2_acisf10489_pi14-548_cl_pass1_src25_1.ximg exists
[Wed Oct 19 01:25:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10489_pi14-548_cl_pass1_src25.csv
[Wed Oct 19 01:25:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10489_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10489_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:25:18 2011] fullrun_ccd2_acisf10489_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Wed Oct 19 01:25:18 2011] fullrun_ccd2_acisf10489_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Oct 19 01:25:18 2011] Fit fullrun_ccd2_acisf10489_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Oct 19 01:25:32 2011] Spatial fit model total counts = 21.622800, observed total counts = 22.000000
[Wed Oct 19 01:25:32 2011] Offset between fit and detection position for source 16 = 0.035393 pixels
[Wed Oct 19 01:25:32 2011] 21.995400 total counts/ 11.058300 bgd. counts: snr = 3.288956
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.035393 pixels
  Position = (243.7, 733.0) = 5 12 27.80 60 28 5.6
  Extent = 0.5 (0.2-0.9)", rotation angle = 0
  Source counts = 10.9 +/- 4.7
  Background counts = 11.1
  Rate = 0.0001 +/- 5e-05
[Wed Oct 19 01:25:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:25:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:25:32 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:25:32 2011] Source does appear to be extended
[Wed Oct 19 01:25:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:28:14 2011] Not overwriting source region fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_src.reg
[Wed Oct 19 01:28:14 2011] Extracting stamp from image fullrun_ccd2_acisf10489_pi14-548_cl_sm2.00.img.gz, (220, 710) - (267, 756)
[Wed Oct 19 01:28:14 2011] Writing fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16.gif
[Wed Oct 19 01:29:23 2011] ../../acisf10489/products/events/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_src.evt and ../../acisf10489/products/events/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Wed Oct 19 01:29:23 2011] Size of ../../acisf10489/products/events/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_src.evt.gz[events] = 14 counts
[Wed Oct 19 01:29:23 2011] Mean chipx,y = (313.93, 793.50)
[Wed Oct 19 01:29:23 2011] Mean tdetx,y = (3854.50, 3772.07)
[Wed Oct 19 01:29:23 2011] chipx,y range = (294.00-319.00, 779.00-815.00)
[Wed Oct 19 01:29:23 2011] Size of ../../acisf10489/products/events/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 22 counts
[Wed Oct 19 01:29:23 2011] ../../acisf10489/products/images/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_src.img and ../../acisf10489/products/images/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Wed Oct 19 01:29:23 2011] ../../acisf10489/products/spectra/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_src.pi and ../../acisf10489/products/spectra/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Wed Oct 19 01:29:23 2011] Not generating rmf since there are only 10 counts
[Wed Oct 19 01:29:26 2011] ../../acisf10489/products/lightcurves/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_src.lc and ../../acisf10489/products/lightcurves/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Wed Oct 19 01:30:06 2011] 192.993
[Wed Oct 19 01:31:17 2011] Updating aperture counts using extracted products
[Wed Oct 19 01:31:17 2011] Error reading totcts from fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_src.pi.gz
[Wed Oct 19 01:31:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 01:31:18 2011] Using photon index=1.80, rate=0.000111, arf fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16.arf
[Wed Oct 19 01:31:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 01:31:18 2011] Updating source flux to 1.3e-15
[Wed Oct 19 01:31:30 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 01:31:31 2011] acisf10489/analysis//spectral/fullrun_ccd2_acisf10489_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete