[Wed Oct 19 01:23:14 2011] Detection parameters:
  Position = (808.9, 42.2) = 5 12 59.85 60 30 57.2
  Extent = 0.7" x 0.5", rotation angle = 119 degrees
  Source counts = 18.6 +/- 4.7
  Background counts = 3.4
  Rate = 0.0002 +/- 5e-05

[Wed Oct 19 01:23:14 2011] Off-axis axis estimate = 2.13'
[Wed Oct 19 01:24:29 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:24:29 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Oct 19 01:24:29 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.145
[Wed Oct 19 01:24:29 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.44"
[Wed Oct 19 01:24:29 2011] fullrun_ccd1_acisf10489_pi14-548_cl_pass0_src12.ximg exists
[Wed Oct 19 01:24:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10489_pi14-548_cl_pass0_src12.csv
[Wed Oct 19 01:24:29 2011] fullrun_ccd1_acisf10489_pi14-548_cl_pass0_src12_1.ximg exists
[Wed Oct 19 01:24:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10489_pi14-548_cl_pass0_src12.csv
[Wed Oct 19 01:24:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10489_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10489_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:24:30 2011] fullrun_ccd1_acisf10489_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Wed Oct 19 01:24:30 2011] fullrun_ccd1_acisf10489_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Oct 19 01:24:30 2011] Fit fullrun_ccd1_acisf10489_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Oct 19 01:24:45 2011] Spatial fit model total counts = 28.993200, observed total counts = 29.000000
[Wed Oct 19 01:24:45 2011] Offset between fit and detection position for source 42 = 0.732787 pixels
[Wed Oct 19 01:24:45 2011] 29.603500 total counts/ 10.249900 bgd. counts: snr = 6.045079
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.732787 pixels
  Position = (809.6, 42.3) = 5 12 59.84 60 30 57.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 19.4 +/- 5.4
  Background counts = 10.2
  Rate = 0.0002 +/- 6e-05
[Wed Oct 19 01:24:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:24:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:24:45 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:24:45 2011] Source does appear to be extended
[Wed Oct 19 01:24:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:25:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:25:15 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Oct 19 01:25:15 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.365
[Wed Oct 19 01:25:15 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.39"
[Wed Oct 19 01:25:15 2011] fullrun_ccd1_acisf10489_pi14-548_cl_pass1_src11.ximg exists
[Wed Oct 19 01:25:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10489_pi14-548_cl_pass1_src11.csv
[Wed Oct 19 01:25:16 2011] fullrun_ccd1_acisf10489_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Oct 19 01:25:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10489_pi14-548_cl_pass1_src11.csv
[Wed Oct 19 01:25:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10489_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10489_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:25:16 2011] fullrun_ccd1_acisf10489_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Oct 19 01:25:16 2011] fullrun_ccd1_acisf10489_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Oct 19 01:25:16 2011] Fit fullrun_ccd1_acisf10489_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Oct 19 01:25:29 2011] Spatial fit model total counts = 28.992600, observed total counts = 29.000000
[Wed Oct 19 01:25:29 2011] Offset between fit and detection position for source 42 = 0.003408 pixels
[Wed Oct 19 01:25:29 2011] 29.601000 total counts/ 10.218300 bgd. counts: snr = 6.063522
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.003408 pixels
  Position = (809.6, 42.3) = 5 12 59.84 60 30 57.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 19.4 +/- 5.4
  Background counts = 10.2
  Rate = 0.0002 +/- 6e-05
[Wed Oct 19 01:25:29 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:25:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:25:29 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:25:29 2011] Source does appear to be extended
[Wed Oct 19 01:25:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:27:07 2011] Not overwriting source region fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_src.reg
[Wed Oct 19 01:27:07 2011] Extracting stamp from image fullrun_ccd1_acisf10489_pi14-548_cl_sm2.00.img.gz, (791, 24) - (828, 60)
[Wed Oct 19 01:27:07 2011] Writing fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42.gif
[Wed Oct 19 01:27:35 2011] ../../acisf10489/products/events/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_src.evt and ../../acisf10489/products/events/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_bgd.evt exist, delete to re-create
[Wed Oct 19 01:27:35 2011] Size of ../../acisf10489/products/events/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_src.evt.gz[events] = 20 counts
[Wed Oct 19 01:27:35 2011] Mean chipx,y = (29.60, 795.90)
[Wed Oct 19 01:27:35 2011] Mean tdetx,y = (4336.10, 4136.60)
[Wed Oct 19 01:27:35 2011] chipx,y range = (5.00-43.00, 779.00-811.00)
[Wed Oct 19 01:27:35 2011] Size of ../../acisf10489/products/events/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_bgd.evt.gz[events] = 13 counts
[Wed Oct 19 01:27:35 2011] ../../acisf10489/products/images/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_src.img and ../../acisf10489/products/images/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_bgd.img exist, delete to re-create
[Wed Oct 19 01:27:35 2011] ../../acisf10489/products/spectra/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_src.pi and ../../acisf10489/products/spectra/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_bgd.pi exist, delete to re-create
[Wed Oct 19 01:27:35 2011] Not generating rmf since there are only 19 counts
[Wed Oct 19 01:27:38 2011] ../../acisf10489/products/lightcurves/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_src.lc and ../../acisf10489/products/lightcurves/fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_bgd.lc exist, delete to re-create
[Wed Oct 19 01:28:13 2011] 192.519
[Wed Oct 19 01:31:17 2011] Updating aperture counts using extracted products
[Wed Oct 19 01:31:17 2011] Error reading totcts from fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42_src.pi.gz
[Wed Oct 19 01:31:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 01:31:17 2011] Using photon index=1.80, rate=0.000196, arf fullrun_ccd1_acisf10489_pi14-548_pass1_cl_src42.arf
[Wed Oct 19 01:31:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 01:31:17 2011] Updating source flux to 2.3e-15
[Wed Oct 19 01:31:26 2011] Source 42 has fewer than 100.000000 counts, skipping spectral fitting