[Wed Oct 19 01:23:10 2011] Detection parameters:
  Position = (378.8, 226.6) = 5 12 19.12 60 32 30.3
  Extent = 0.9" x 0.6", rotation angle = 65 degrees
  Source counts = 77.5 +/- 9.1
  Background counts = 5.5
  Rate = 0.0008 +/- 9e-05

[Wed Oct 19 01:23:11 2011] Off-axis axis estimate = 4.01'
[Wed Oct 19 01:24:27 2011] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:24:27 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Wed Oct 19 01:24:27 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.041
[Wed Oct 19 01:24:27 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.83"
[Wed Oct 19 01:24:28 2011] fullrun_ccd0_acisf10489_pi14-548_cl_pass0_src11.ximg exists
[Wed Oct 19 01:24:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10489_pi14-548_cl_pass0_src11.csv
[Wed Oct 19 01:24:28 2011] fullrun_ccd0_acisf10489_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Oct 19 01:24:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10489_pi14-548_cl_pass0_src11.csv
[Wed Oct 19 01:24:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10489_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10489_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:24:28 2011] fullrun_ccd0_acisf10489_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Oct 19 01:24:28 2011] fullrun_ccd0_acisf10489_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Oct 19 01:24:28 2011] Fit fullrun_ccd0_acisf10489_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Oct 19 01:24:42 2011] Spatial fit model total counts = 85.000000, observed total counts = 85.000000
[Wed Oct 19 01:24:42 2011] Offset between fit and detection position for source 11 = 0.711783 pixels
[Wed Oct 19 01:24:42 2011] 85.286600 total counts/ 15.918400 bgd. counts: snr = 17.386442
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.711783 pixels
  Position = (379.2, 227.2) = 5 12 19.12 60 32 30.3
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 69.4 +/- 9.2
  Background counts = 15.9
  Rate = 0.0007 +/- 9e-05
[Wed Oct 19 01:24:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:24:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:24:42 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:24:42 2011] Source does appear to be extended
[Wed Oct 19 01:24:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:25:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 01:25:13 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Wed Oct 19 01:25:13 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.070
[Wed Oct 19 01:25:13 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.71"
[Wed Oct 19 01:25:14 2011] fullrun_ccd0_acisf10489_pi14-548_cl_pass1_src11.ximg exists
[Wed Oct 19 01:25:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10489_pi14-548_cl_pass1_src11.csv
[Wed Oct 19 01:25:14 2011] fullrun_ccd0_acisf10489_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Oct 19 01:25:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10489_pi14-548_cl_pass1_src11.csv
[Wed Oct 19 01:25:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10489_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10489_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 01:25:14 2011] fullrun_ccd0_acisf10489_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Oct 19 01:25:14 2011] fullrun_ccd0_acisf10489_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Oct 19 01:25:14 2011] Fit fullrun_ccd0_acisf10489_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Oct 19 01:25:26 2011] Spatial fit model total counts = 85.407900, observed total counts = 86.000000
[Wed Oct 19 01:25:26 2011] Offset between fit and detection position for source 11 = 0.024898 pixels
[Wed Oct 19 01:25:26 2011] 85.668000 total counts/ 16.723800 bgd. counts: snr = 16.858940
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.024898 pixels
  Position = (379.2, 227.2) = 5 12 19.12 60 32 30.3
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 68.9 +/- 9.3
  Background counts = 16.7
  Rate = 0.0007 +/- 9e-05
[Wed Oct 19 01:25:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 01:25:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 01:25:26 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 01:25:26 2011] Source does appear to be extended
[Wed Oct 19 01:25:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 01:25:56 2011] Not overwriting source region fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_src.reg
[Wed Oct 19 01:25:56 2011] Extracting stamp from image fullrun_ccd0_acisf10489_pi14-548_cl_sm2.00.img.gz, (347, 195) - (412, 260)
[Wed Oct 19 01:25:56 2011] Writing fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11.gif
[Wed Oct 19 01:26:26 2011] ../../acisf10489/products/events/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_src.evt and ../../acisf10489/products/events/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed Oct 19 01:26:26 2011] Size of ../../acisf10489/products/events/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_src.evt.gz[events] = 79 counts
[Wed Oct 19 01:26:26 2011] Mean chipx,y = (811.18, 662.53)
[Wed Oct 19 01:26:26 2011] Mean tdetx,y = (3723.53, 4320.82)
[Wed Oct 19 01:26:26 2011] chipx,y range = (793.00-832.00, 644.00-682.00)
[Wed Oct 19 01:26:26 2011] Size of ../../acisf10489/products/events/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 44 counts
[Wed Oct 19 01:26:26 2011] ../../acisf10489/products/images/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_src.img and ../../acisf10489/products/images/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed Oct 19 01:26:26 2011] ../../acisf10489/products/spectra/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_src.pi and ../../acisf10489/products/spectra/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed Oct 19 01:26:26 2011] Not generating rmf since there are only 68 counts
[Wed Oct 19 01:26:28 2011] ../../acisf10489/products/lightcurves/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_src.lc and ../../acisf10489/products/lightcurves/fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed Oct 19 01:27:06 2011] 191.759
[Wed Oct 19 01:31:16 2011] Updating aperture counts using extracted products
[Wed Oct 19 01:31:16 2011] Error reading totcts from fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Oct 19 01:31:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 01:31:17 2011] Using photon index=1.80, rate=0.000698, arf fullrun_ccd0_acisf10489_pi14-548_pass1_cl_src11.arf
[Wed Oct 19 01:31:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 01:31:17 2011] Updating source flux to 8.2e-15
[Wed Oct 19 01:31:22 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting