[Wed Oct 26 07:55:55 2011] Detection parameters:
  Position = (1081.8, 673.7) = 2 22 25.37 1 45 9.7
  Extent = 1.0" x 0.7", rotation angle = 152 degrees
  Source counts = 97.3 +/- 10.0
  Background counts = 3.7
  Rate = 0.004 +/- 0.0004

[Wed Oct 26 07:55:56 2011] Off-axis axis estimate = 4.96'
[Wed Oct 26 07:56:37 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 07:56:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 07:56:37 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Wed Oct 26 07:56:37 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.094
[Wed Oct 26 07:56:37 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.17"
[Wed Oct 26 07:56:38 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 26 07:56:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 07:56:38 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 26 07:56:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 07:56:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 07:56:38 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 26 07:56:38 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 26 07:56:38 2011] Fit fullrun_ccd7_acisf10485_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 26 07:56:44 2011] Spatial fit model total counts = 100.763000, observed total counts = 99.000000
[Wed Oct 26 07:56:44 2011] Offset between fit and detection position for source 6 = 0.843607 pixels
[Wed Oct 26 07:56:44 2011] 100.818377 total counts/ 0.281377 bgd. counts: snr = 189.531598
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.843607 pixels
  Position = (1082.6, 674.1) = 2 22 25.36 1 45 9.6
  Extent = 1.2 (1.0-1.3)", rotation angle = 0
  Source counts = 100.5 +/- 10.0
  Background counts = 0.3
  Rate = 0.004 +/- 0.0004
[Wed Oct 26 07:56:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 07:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 07:56:44 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 07:56:44 2011] Source does appear to be extended
[Wed Oct 26 07:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 07:57:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 07:57:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 07:57:00 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Wed Oct 26 07:57:00 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.882
[Wed Oct 26 07:57:00 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.19"
[Wed Oct 26 07:57:00 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 26 07:57:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 07:57:00 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 26 07:57:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 07:57:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 07:57:01 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 26 07:57:01 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 26 07:57:01 2011] Fit fullrun_ccd7_acisf10485_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 26 07:57:07 2011] Spatial fit model total counts = 102.833000, observed total counts = 101.000000
[Wed Oct 26 07:57:07 2011] Offset between fit and detection position for source 6 = 0.049767 pixels
[Wed Oct 26 07:57:07 2011] 103.229000 total counts/ 5.769900 bgd. counts: snr = 40.573106
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.049767 pixels
  Position = (1082.5, 674.1) = 2 22 25.37 1 45 9.6
  Extent = 1.2 (1.0-1.3)", rotation angle = 0
  Source counts = 97.5 +/- 10.2
  Background counts = 5.8
  Rate = 0.004 +/- 0.0004
[Wed Oct 26 07:57:07 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 07:57:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 07:57:07 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 07:57:07 2011] Source does appear to be extended
[Wed Oct 26 07:57:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 07:58:11 2011] Not overwriting source region fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_src.reg
[Wed Oct 26 07:58:11 2011] Extracting stamp from image fullrun_ccd7_acisf10485_pi14-548_cl_sm2.00.img.gz, (1029, 621) - (1136, 727)
[Wed Oct 26 07:58:11 2011] Writing fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6.gif
[Wed Oct 26 07:58:17 2011] ../../acisf10485/products/events/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_src.evt and ../../acisf10485/products/events/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed Oct 26 07:58:18 2011] Size of ../../acisf10485/products/events/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_src.evt.gz[events] = 102 counts
[Wed Oct 26 07:58:18 2011] Mean chipx,y = (716.77, 812.95)
[Wed Oct 26 07:58:18 2011] Mean tdetx,y = (4633.77, 2514.95)
[Wed Oct 26 07:58:18 2011] chipx,y range = (699.00-739.00, 794.00-834.00)
[Wed Oct 26 07:58:18 2011] Size of ../../acisf10485/products/events/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 46 counts
[Wed Oct 26 07:58:18 2011] ../../acisf10485/products/images/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_src.img and ../../acisf10485/products/images/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed Oct 26 07:58:18 2011] ../../acisf10485/products/spectra/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_src.pi and ../../acisf10485/products/spectra/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed Oct 26 07:58:18 2011] Not generating rmf since there are only 97 counts
[Wed Oct 26 07:58:20 2011] ../../acisf10485/products/lightcurves/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_src.lc and ../../acisf10485/products/lightcurves/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed Oct 26 07:59:00 2011] 219.765
[Wed Oct 26 07:59:03 2011] Updating aperture counts using extracted products
[Wed Oct 26 07:59:03 2011] Error reading totcts from fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Oct 26 07:59:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 07:59:03 2011] Using photon index=1.80, rate=0.00418, arf fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src6.arf
[Wed Oct 26 07:59:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 07:59:03 2011] Updating source flux to 3.3e-14
[Wed Oct 26 07:59:12 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting