[Wed Oct 26 07:55:55 2011] Detection parameters:
  Position = (1107.1, 1022.7) = 2 22 24.54 1 48 1.4
  Extent = 2.1" x 1.3", rotation angle = 150 degrees
  Source counts = 36.4 +/- 6.6
  Background counts = 6.6
  Rate = 0.002 +/- 0.0003

[Wed Oct 26 07:55:56 2011] Off-axis axis estimate = 6.57'
[Wed Oct 26 07:56:37 2011] Using EEF radius (= 1.93 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 07:56:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 07:56:37 2011] Initial guess for spatial extent in simple fitting = 1.93"
[Wed Oct 26 07:56:37 2011] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.036
[Wed Oct 26 07:56:37 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.93"
[Wed Oct 26 07:56:38 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct 26 07:56:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src5.csv
[Wed Oct 26 07:56:38 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct 26 07:56:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src5.csv
[Wed Oct 26 07:56:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10485_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 07:56:38 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct 26 07:56:38 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct 26 07:56:38 2011] Fit fullrun_ccd7_acisf10485_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct 26 07:56:44 2011] Spatial fit model total counts = 39.198800, observed total counts = 44.000000
[Wed Oct 26 07:56:44 2011] Offset between fit and detection position for source 11 = 0.830295 pixels
[Wed Oct 26 07:56:44 2011] 38.990800 total counts/ 13.079800 bgd. counts: snr = 7.164463
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.830295 pixels
  Position = (1107.9, 1022.9) = 2 22 24.53 1 48 1.2
  Extent = 1.5" x 1.3", rotation angle = 12
  Source counts = 25.9 +/- 6.2
  Background counts = 13.1
  Rate = 0.001 +/- 0.0003
[Wed Oct 26 07:56:44 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 07:56:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 07:56:44 2011] Assessing source extent using major
[Wed Oct 26 07:56:44 2011] Source does appear to be extended
[Wed Oct 26 07:56:44 2011] Computing asymmetry using major and minor axis, asym = 1.17
[Wed Oct 26 07:57:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 07:57:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 26 07:57:00 2011] Initial guess for spatial extent in simple fitting = 1.39"
[Wed Oct 26 07:57:00 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.812
[Wed Oct 26 07:57:00 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.39"
[Wed Oct 26 07:57:00 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src5.ximg exists
[Wed Oct 26 07:57:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src5.csv
[Wed Oct 26 07:57:00 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Oct 26 07:57:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src5.csv
[Wed Oct 26 07:57:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10485_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 07:57:01 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct 26 07:57:01 2011] fullrun_ccd7_acisf10485_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct 26 07:57:01 2011] Fit fullrun_ccd7_acisf10485_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Oct 26 07:57:07 2011] Spatial fit model total counts = 37.229400, observed total counts = 36.000000
[Wed Oct 26 07:57:07 2011] Offset between fit and detection position for source 11 = 2.774125 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.774125 pixels
  Position = (1110.2, 1021.4) = 2 22 24.46 1 48 0.5
  Extent = 2.0 (1.0-2.8)", rotation angle = 0
  Source counts = 38.0 +/- 6.2
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Wed Oct 26 07:57:07 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 07:57:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 07:57:07 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 07:57:07 2011] Source does appear to be extended
[Wed Oct 26 07:57:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 07:58:11 2011] Not overwriting source region fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_src.reg
[Wed Oct 26 07:58:11 2011] Extracting stamp from image fullrun_ccd7_acisf10485_pi14-548_cl_sm2.00.img.gz, (1021, 932) - (1200, 1111)
[Wed Oct 26 07:58:11 2011] Writing fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11.gif
[Wed Oct 26 07:58:23 2011] ../../acisf10485/products/events/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_src.evt and ../../acisf10485/products/events/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed Oct 26 07:58:23 2011] Size of ../../acisf10485/products/events/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_src.evt.gz[events] = 46 counts
[Wed Oct 26 07:58:23 2011] Mean chipx,y = (989.07, 599.37)
[Wed Oct 26 07:58:23 2011] Mean tdetx,y = (4906.07, 2301.37)
[Wed Oct 26 07:58:23 2011] chipx,y range = (969.00-1014.00, 575.00-618.00)
[Wed Oct 26 07:58:23 2011] Size of ../../acisf10485/products/events/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 93 counts
[Wed Oct 26 07:58:23 2011] ../../acisf10485/products/images/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_src.img and ../../acisf10485/products/images/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed Oct 26 07:58:23 2011] ../../acisf10485/products/spectra/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_src.pi and ../../acisf10485/products/spectra/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed Oct 26 07:58:23 2011] Not generating rmf since there are only 38 counts
[Wed Oct 26 07:58:26 2011] ../../acisf10485/products/lightcurves/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_src.lc and ../../acisf10485/products/lightcurves/fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed Oct 26 07:59:00 2011] 204.14
[Wed Oct 26 07:59:03 2011] Updating aperture counts using extracted products
[Wed Oct 26 07:59:03 2011] Error reading totcts from fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Oct 26 07:59:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 07:59:03 2011] Using photon index=1.80, rate=0.00163, arf fullrun_ccd7_acisf10485_pi14-548_pass1_cl_src11.arf
[Wed Oct 26 07:59:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 07:59:03 2011] Updating source flux to 1.3e-14
[Wed Oct 26 07:59:12 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting