[Tue Sep 27 20:11:24 2011] Detection parameters:
  Position = (1096.6, 1017.5) = 16 15 34.33 30 47 27.8
  Extent = 1.8" x 1.6", rotation angle = 72 degrees
  Source counts = 135.4 +/- 12.7
  Background counts = 26.6
  Rate = 0.005 +/- 0.0005

[Tue Sep 27 20:11:24 2011] Off-axis axis estimate = 10.22'
[Tue Sep 27 20:12:06 2011] Using EEF radius (= 4.63 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:12:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 20:12:06 2011] Initial guess for spatial extent in simple fitting = 4.63"
[Tue Sep 27 20:12:06 2011] source mask rpix=9.4, npix_max = 392, mask sum = 380, frac = 0.968
[Tue Sep 27 20:12:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.63"
[Tue Sep 27 20:12:06 2011] fullrun_ccd3_acisf10482_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 20:12:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10482_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 20:12:06 2011] fullrun_ccd3_acisf10482_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 20:12:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10482_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 20:12:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10482_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10482_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:12:06 2011] fullrun_ccd3_acisf10482_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 20:12:06 2011] fullrun_ccd3_acisf10482_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 20:12:06 2011] Fit fullrun_ccd3_acisf10482_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 20:12:13 2011] Spatial fit model total counts = 199.930000, observed total counts = 194.000000
[Tue Sep 27 20:12:13 2011] Offset between fit and detection position for source 4 = 1.318906 pixels
[Tue Sep 27 20:12:13 2011] 199.545700 total counts/ 54.556700 bgd. counts: snr = 19.629580
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.318906 pixels
  Position = (1097.9, 1017.6) = 16 15 34.30 30 47 27.6
  Extent = 3.3 (2.8-3.9)", rotation angle = 0
  Source counts = 145.0 +/- 14.1
  Background counts = 54.6
  Rate = 0.005 +/- 0.0005
[Tue Sep 27 20:12:13 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:12:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:12:13 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:12:13 2011] Source does appear to be extended
[Tue Sep 27 20:12:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:12:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:12:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 20:12:31 2011] Initial guess for spatial extent in simple fitting = 3.34"
[Tue Sep 27 20:12:31 2011] source mask rpix=6.8, npix_max = 212, mask sum = 210, frac = 0.989
[Tue Sep 27 20:12:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.34"
[Tue Sep 27 20:12:31 2011] fullrun_ccd3_acisf10482_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 20:12:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10482_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 20:12:31 2011] fullrun_ccd3_acisf10482_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 20:12:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10482_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 20:12:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10482_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10482_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:12:31 2011] fullrun_ccd3_acisf10482_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 20:12:31 2011] fullrun_ccd3_acisf10482_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 20:12:31 2011] Fit fullrun_ccd3_acisf10482_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 20:12:38 2011] Spatial fit model total counts = 179.938000, observed total counts = 179.000000
[Tue Sep 27 20:12:38 2011] Offset between fit and detection position for source 4 = 0.212327 pixels
[Tue Sep 27 20:12:38 2011] 179.754800 total counts/ 49.114800 bgd. counts: snr = 18.641033
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.212327 pixels
  Position = (1097.8, 1017.8) = 16 15 34.30 30 47 27.7
  Extent = 3.0 (2.2-3.7)", rotation angle = 0
  Source counts = 130.6 +/- 13.4
  Background counts = 49.1
  Rate = 0.005 +/- 0.0005
[Tue Sep 27 20:12:38 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:12:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:12:38 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:12:38 2011] Source does appear to be extended
[Tue Sep 27 20:12:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:13:11 2011] Not overwriting source region fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_src.reg
[Tue Sep 27 20:13:11 2011] Extracting stamp from image fullrun_ccd3_acisf10482_pi14-548_cl_sm2.00.img.gz, (960, 880) - (1236, 1156)
[Tue Sep 27 20:13:11 2011] Writing fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4.gif
[Tue Sep 27 20:13:11 2011] ../../acisf10482/products/events/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_src.evt and ../../acisf10482/products/events/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Sep 27 20:13:11 2011] Size of ../../acisf10482/products/events/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_src.evt.gz[events] = 170 counts
[Tue Sep 27 20:13:11 2011] Mean chipx,y = (21.71, 141.07)
[Tue Sep 27 20:13:11 2011] Mean tdetx,y = (4990.93, 3082.71)
[Tue Sep 27 20:13:11 2011] chipx,y range = (2.00-57.00, 105.00-175.00)
[Tue Sep 27 20:13:11 2011] Size of ../../acisf10482/products/events/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 123 counts
[Tue Sep 27 20:13:11 2011] ../../acisf10482/products/images/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_src.img and ../../acisf10482/products/images/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Sep 27 20:13:11 2011] ../../acisf10482/products/spectra/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_src.pi and ../../acisf10482/products/spectra/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Sep 27 20:13:14 2011] ../../acisf10482/products/lightcurves/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_src.lc and ../../acisf10482/products/lightcurves/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Sep 27 20:13:24 2011] Keeping rmf generated by specextract
[Tue Sep 27 20:13:24 2011] 161.853
[Tue Sep 27 20:14:39 2011] Updating aperture counts using extracted products
[Tue Sep 27 20:14:39 2011] Error reading totcts from fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Sep 27 20:14:39 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:14:39 2011] Using photon index=1.80, rate=0.0047, arf fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4.arf
[Tue Sep 27 20:14:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 20:14:39 2011] Updating source flux to 7e-14
[Tue Sep 27 20:14:45 2011] Reading fit data from acisf10482/analysis//spectral/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_pl.csv
[Tue Sep 27 20:14:45 2011] Spectral fit parameter nH value = 2.65637e+21
[Tue Sep 27 20:14:45 2011] Spectral fit parameter PhoIndex value = 1.5141
[Tue Sep 27 20:14:45 2011] Failed to get F(0.3-8.0) from acisf10482/analysis//spectral/fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 20:14:45 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:14:45 2011] Using Nh = 2.7e+21, photon index=1.51, rate=0.0047, arf fullrun_ccd3_acisf10482_pi14-548_pass1_cl_src4.arf
[Tue Sep 27 20:14:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 20:14:45 2011] Updating source flux to 7.5e-14