[Mon Oct 10 12:41:07 2011] Detection parameters:
  Position = (805.4, 598.2) = 14 47 20.50 8 26 12.8
  Extent = 4.7" x 3.5", rotation angle = 36 degrees
  Source counts = 20.1 +/- 6.8
  Background counts = 25.9
  Rate = 0.002 +/- 0.0006

[Mon Oct 10 12:41:07 2011] Off-axis axis estimate = 3.87'
[Mon Oct 10 12:42:01 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 12:42:01 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Mon Oct 10 12:42:01 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.126
[Mon Oct 10 12:42:01 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.79"
[Mon Oct 10 12:42:01 2011] fullrun_ccd7_acisf10481_pi14-548_cl_pass0_src7.ximg exists
[Mon Oct 10 12:42:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10481_pi14-548_cl_pass0_src7.csv
[Mon Oct 10 12:42:01 2011] fullrun_ccd7_acisf10481_pi14-548_cl_pass0_src7_1.ximg exists
[Mon Oct 10 12:42:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10481_pi14-548_cl_pass0_src7.csv
[Mon Oct 10 12:42:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10481_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10481_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 12:42:02 2011] fullrun_ccd7_acisf10481_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Mon Oct 10 12:42:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10481_pi14-548_cl_pass0_tfrozen_src7.csv
[Mon Oct 10 12:42:02 2011] fullrun_ccd7_acisf10481_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Oct 10 12:42:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10481_pi14-548_cl_pass0_tfrozen_src7.csv
[Mon Oct 10 12:42:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10481_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10481_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 12:42:10 2011] Source 16 is offset by 5.595037 and 3.813626 pixels which is larger than
2 X fitted extent = 0.647744 x 0.647744, not incorporating fit results
[Mon Oct 10 12:42:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 12:42:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 12:42:10 2011] Assessing source extent using major
[Mon Oct 10 12:42:10 2011] Source does appear to be extended
[Mon Oct 10 12:42:10 2011] Computing asymmetry using major and minor axis, asym = 1.34
[Mon Oct 10 12:42:11 2011] Deleting source due to low Poisson probability 0.9