[Wed Oct 26 00:36:47 2011] Detection parameters:
  Position = (678.6, 1027.2) = 15 16 22.50 6 59 39.6
  Extent = 0.8" x 0.6", rotation angle = 39 degrees
  Source counts = 76.3 +/- 9.4
  Background counts = 12.7
  Rate = 0.001 +/- 0.0001

[Wed Oct 26 00:36:48 2011] Off-axis axis estimate = 4.50'
[Wed Oct 26 00:38:35 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 00:38:35 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Wed Oct 26 00:38:35 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Wed Oct 26 00:38:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.99"
[Wed Oct 26 00:38:35 2011] fullrun_ccd6_acisf10479_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 26 00:38:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10479_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 00:38:35 2011] fullrun_ccd6_acisf10479_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 26 00:38:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10479_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 00:38:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10479_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10479_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 00:38:35 2011] fullrun_ccd6_acisf10479_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 26 00:38:35 2011] fullrun_ccd6_acisf10479_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 26 00:38:35 2011] Fit fullrun_ccd6_acisf10479_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 26 00:38:43 2011] Source 1 is offset by 6.279690 and 7.274993 pixels which is larger than
2 X fitted extent = 1.011074 x 1.011074, not incorporating fit results
[Wed Oct 26 00:38:43 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 00:38:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 00:38:43 2011] Assessing source extent using major
[Wed Oct 26 00:38:43 2011] Source does appear to be extended
[Wed Oct 26 00:38:43 2011] Computing asymmetry using major and minor axis, asym = 1.25
[Wed Oct 26 00:39:04 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 00:39:04 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Wed Oct 26 00:39:04 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Wed Oct 26 00:39:04 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.99"
[Wed Oct 26 00:39:05 2011] fullrun_ccd6_acisf10479_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 26 00:39:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10479_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 00:39:05 2011] fullrun_ccd6_acisf10479_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 26 00:39:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10479_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 00:39:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10479_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10479_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 00:39:05 2011] fullrun_ccd6_acisf10479_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 26 00:39:05 2011] fullrun_ccd6_acisf10479_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 26 00:39:05 2011] Fit fullrun_ccd6_acisf10479_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 26 00:39:11 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 655.179072 pixels away
[Wed Oct 26 00:39:11 2011] Spatial fit model total counts = 95.999400, observed total counts = 96.000000
[Wed Oct 26 00:39:11 2011] Offset between fit and detection position for source 1 = 0.281528 pixels
[Wed Oct 26 00:39:11 2011] 99.198900 total counts/ 58.760500 bgd. counts: snr = 5.275349
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.281528 pixels
  Position = (678.3, 1027.2) = 15 16 22.52 6 59 39.3
  Extent = 0.7 (0.5-1.3)", rotation angle = 0
  Source counts = 40.4 +/- 10.0
  Background counts = 58.8
  Rate = 0.0006 +/- 0.0002
[Wed Oct 26 00:39:11 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 00:39:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 00:39:11 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 00:39:11 2011] Source does appear to be extended
[Wed Oct 26 00:39:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 00:39:59 2011] Not overwriting source region fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 26 00:39:59 2011] Extracting stamp from image fullrun_ccd6_acisf10479_pi14-548_cl_sm2.00.img.gz, (648, 997) - (709, 1058)
[Wed Oct 26 00:39:59 2011] Writing fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1.gif
[Wed Oct 26 00:40:05 2011] ../../acisf10479/products/events/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_src.evt and ../../acisf10479/products/events/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 26 00:40:05 2011] Size of ../../acisf10479/products/events/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_src.evt.gz[events] = 69 counts
[Wed Oct 26 00:40:05 2011] Mean chipx,y = (743.68, 734.17)
[Wed Oct 26 00:40:05 2011] Mean tdetx,y = (3618.68, 2436.17)
[Wed Oct 26 00:40:05 2011] chipx,y range = (723.00-758.00, 718.00-754.00)
[Wed Oct 26 00:40:05 2011] Size of ../../acisf10479/products/events/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 70 counts
[Wed Oct 26 00:40:05 2011] ../../acisf10479/products/images/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_src.img and ../../acisf10479/products/images/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 26 00:40:05 2011] ../../acisf10479/products/spectra/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_src.pi and ../../acisf10479/products/spectra/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 26 00:40:05 2011] Not generating rmf since there are only 40 counts
[Wed Oct 26 00:40:08 2011] ../../acisf10479/products/lightcurves/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_src.lc and ../../acisf10479/products/lightcurves/fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 26 00:40:30 2011] 190.214
[Wed Oct 26 00:41:25 2011] Updating aperture counts using extracted products
[Wed Oct 26 00:41:25 2011] Error reading totcts from fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 26 00:41:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 00:41:25 2011] Using photon index=1.80, rate=0.000623, arf fullrun_ccd6_acisf10479_pi14-548_pass1_cl_src1.arf
[Wed Oct 26 00:41:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 00:41:25 2011] Updating source flux to 7.2e-15
[Wed Oct 26 00:41:30 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Oct 26 00:41:30 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting