[Wed Oct 19 00:37:28 2011] Detection parameters: Position = (311.2, 802.8) = 15 16 31.72 6 58 53.1 Extent = 0.6" x 0.5", rotation angle = 177 degrees Source counts = 838.9 +/- 29.8 Background counts = 50.1 Rate = 0.007 +/- 0.0003 [Wed Oct 19 00:37:28 2011] Off-axis axis estimate = 2.77' [Wed Oct 19 00:40:19 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting [Wed Oct 19 00:40:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Oct 19 00:40:19 2011] Initial guess for spatial extent in simple fitting = 0.54" [Wed Oct 19 00:40:19 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.889 [Wed Oct 19 00:40:19 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.54" [Wed Oct 19 00:40:20 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src1.ximg exists [Wed Oct 19 00:40:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src1.csv [Wed Oct 19 00:40:20 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src1_1.ximg exists [Wed Oct 19 00:40:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src1.csv [Wed Oct 19 00:40:20 2011] It looks like the fit did not converge You should probably delete fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 19 00:40:20 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Wed Oct 19 00:40:20 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Wed Oct 19 00:40:20 2011] Fit fullrun_ccd6_acisf10478_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Wed Oct 19 00:40:29 2011] Spatial fit model total counts = 896.998000, observed total counts = 897.000000 [Wed Oct 19 00:40:29 2011] Offset between fit and detection position for source 8 = 0.697208 pixels [Wed Oct 19 00:40:29 2011] 895.735900 total counts/ 69.039900 bgd. counts: snr = 99.493741 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.697208 pixels Position = (311.7, 803.3) = 15 16 31.73 6 58 53.1 Extent = 0.8 (0.7-0.8)", rotation angle = 0 Source counts = 826.7 +/- 29.9 Background counts = 69.0 Rate = 0.007 +/- 0.0003 [Wed Oct 19 00:40:29 2011] Vigneting correction estimate = 1.000000 [Wed Oct 19 00:40:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 19 00:40:29 2011] Assessing source extent using major axis lower bound [Wed Oct 19 00:40:29 2011] Source does appear to be extended [Wed Oct 19 00:40:29 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 19 00:40:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Oct 19 00:40:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Oct 19 00:40:52 2011] Initial guess for spatial extent in simple fitting = 0.75" [Wed Oct 19 00:40:52 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.974 [Wed Oct 19 00:40:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.75" [Wed Oct 19 00:40:53 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src1.ximg exists [Wed Oct 19 00:40:53 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src1_1.ximg exists [Wed Oct 19 00:40:53 2011] Fit fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src1 appears to have run properly [Wed Oct 19 00:40:53 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Wed Oct 19 00:40:53 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Wed Oct 19 00:40:53 2011] Fit fullrun_ccd6_acisf10478_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Wed Oct 19 00:41:01 2011] Spatial fit model total counts = 906.326000, observed total counts = 897.000000 [Wed Oct 19 00:41:01 2011] Offset between fit and detection position for source 8 = 0.002111 pixels [Wed Oct 19 00:41:01 2011] 905.098300 total counts/ 70.150300 bgd. counts: snr = 99.688408 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.002111 pixels Position = (311.7, 803.3) = 15 16 31.73 6 58 53.1 Extent = 0.7 (0.7-0.8)", rotation angle = 0 Source counts = 834.9 +/- 30.1 Background counts = 70.2 Rate = 0.007 +/- 0.0003 [Wed Oct 19 00:41:01 2011] Vigneting correction estimate = 1.000000 [Wed Oct 19 00:41:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 19 00:41:01 2011] Assessing source extent using major axis lower bound [Wed Oct 19 00:41:01 2011] Source does appear to be extended [Wed Oct 19 00:41:01 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 19 00:42:03 2011] Not overwriting source region fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_src.reg [Wed Oct 19 00:42:03 2011] Extracting stamp from image fullrun_ccd6_acisf10478_pi14-548_cl_sm2.00.img.gz, (277, 769) - (346, 837) [Wed Oct 19 00:42:03 2011] Writing fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8.gif [Wed Oct 19 00:42:04 2011] ../../acisf10478/products/events/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_src.evt and ../../acisf10478/products/events/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create [Wed Oct 19 00:42:04 2011] Size of ../../acisf10478/products/events/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_src.evt.gz[events] = 854 counts [Wed Oct 19 00:42:04 2011] Mean chipx,y = (907.66, 414.43) [Wed Oct 19 00:42:04 2011] Mean tdetx,y = (3782.66, 2116.43) [Wed Oct 19 00:42:04 2011] chipx,y range = (884.00-931.00, 393.00-437.00) [Wed Oct 19 00:42:04 2011] Size of ../../acisf10478/products/events/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 318 counts [Wed Oct 19 00:42:04 2011] ../../acisf10478/products/images/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_src.img and ../../acisf10478/products/images/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create [Wed Oct 19 00:42:04 2011] ../../acisf10478/products/spectra/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_src.pi and ../../acisf10478/products/spectra/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create [Wed Oct 19 00:42:07 2011] ../../acisf10478/products/lightcurves/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_src.lc and ../../acisf10478/products/lightcurves/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create [Wed Oct 19 00:42:46 2011] Keeping rmf generated by specextract [Wed Oct 19 00:42:46 2011] 205.329 [Wed Oct 19 00:44:14 2011] Updating aperture counts using extracted products [Wed Oct 19 00:44:14 2011] Error reading totcts from fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_src.pi.gz [Wed Oct 19 00:44:14 2011] Calculating source flux in energy range 0.30-8.00 [Wed Oct 19 00:44:14 2011] Using photon index=1.80, rate=0.00701, arf fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8.arf [Wed Oct 19 00:44:14 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Oct 19 00:44:14 2011] Updating source flux to 7.6e-14 [Wed Oct 19 00:44:40 2011] Reading fit data from acisf10478/analysis//spectral/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_pl.csv [Wed Oct 19 00:44:40 2011] Spectral fit parameter nH value = 4.63819e+20 [Wed Oct 19 00:44:40 2011] Spectral fit parameter PhoIndex value = 1.92114 [Wed Oct 19 00:44:40 2011] Failed to get F(0.3-8.0) from acisf10478/analysis//spectral/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected [Wed Oct 19 00:44:40 2011] Calculating source flux in energy range 0.30-8.00 [Wed Oct 19 00:44:40 2011] Using Nh = 4.6e+20, photon index=1.92, rate=0.00701, arf fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src8.arf [Wed Oct 19 00:44:40 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Oct 19 00:44:40 2011] Updating source flux to 7.2e-14