[Wed Oct 19 00:37:27 2011] Detection parameters:
  Position = (399.9, 387.4) = 15 16 28.80 6 55 28.7
  Extent = 2.2" x 1.5", rotation angle = 18 degrees
  Source counts = 45.7 +/- 9.0
  Background counts = 35.3
  Rate = 0.0004 +/- 8e-05

[Wed Oct 19 00:37:28 2011] Off-axis axis estimate = 5.97'
[Wed Oct 19 00:40:19 2011] Using EEF radius (= 1.62 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 00:40:19 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Wed Oct 19 00:40:19 2011] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.978
[Wed Oct 19 00:40:19 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.62"
[Wed Oct 19 00:40:20 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src6.ximg exists
[Wed Oct 19 00:40:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src6.csv
[Wed Oct 19 00:40:20 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Oct 19 00:40:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src6.csv
[Wed Oct 19 00:40:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10478_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 00:40:20 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct 19 00:40:20 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct 19 00:40:20 2011] Fit fullrun_ccd6_acisf10478_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Oct 19 00:40:29 2011] Spatial fit model total counts = 76.445800, observed total counts = 76.000000
[Wed Oct 19 00:40:29 2011] Offset between fit and detection position for source 2 = 5.273830 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.273830 pixels
  Position = (395.0, 385.4) = 15 16 28.97 6 55 27.5
  Extent = 2.8 (2.1-3.2)", rotation angle = 0
  Source counts = 82.6 +/- 9.1
  Background counts = 0.0
  Rate = 0.0007 +/- 8e-05
[Wed Oct 19 00:40:29 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 00:40:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 00:40:29 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 00:40:29 2011] Source does appear to be extended
[Wed Oct 19 00:40:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 00:40:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 00:40:52 2011] Initial guess for spatial extent in simple fitting = 2.78"
[Wed Oct 19 00:40:52 2011] source mask rpix=5.6, npix_max = 150, mask sum = 156, frac = 1.034
[Wed Oct 19 00:40:52 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 2.78"
[Wed Oct 19 00:40:53 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src6.ximg exists
[Wed Oct 19 00:40:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src6.csv
[Wed Oct 19 00:40:53 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Oct 19 00:40:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src6.csv
[Wed Oct 19 00:40:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10478_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 00:40:53 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct 19 00:40:53 2011] fullrun_ccd6_acisf10478_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct 19 00:40:53 2011] Fit fullrun_ccd6_acisf10478_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Oct 19 00:41:01 2011] Spatial fit model total counts = 146.995000, observed total counts = 147.000000
[Wed Oct 19 00:41:01 2011] Offset between fit and detection position for source 2 = 6.186028 pixels
[Wed Oct 19 00:41:01 2011] 146.756300 total counts/ 106.161000 bgd. counts: snr = 3.939973
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 6.186028 pixels
  Position = (400.7, 387.9) = 15 16 28.79 6 55 28.7
  Extent = 2.0 (0.7-2.9)", rotation angle = 0
  Source counts = 40.6 +/- 12.1
  Background counts = 106.2
  Rate = 0.0003 +/- 0.0001
[Wed Oct 19 00:41:01 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 00:41:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 00:41:01 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 00:41:01 2011] Source does appear to be extended
[Wed Oct 19 00:41:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 00:42:03 2011] Not overwriting source region fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 19 00:42:03 2011] Extracting stamp from image fullrun_ccd6_acisf10478_pi14-548_cl_sm2.00.img.gz, (310, 297) - (492, 479)
[Wed Oct 19 00:42:03 2011] Writing fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2.gif
[Wed Oct 19 00:42:19 2011] ../../acisf10478/products/events/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_src.evt and ../../acisf10478/products/events/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct 19 00:42:19 2011] Size of ../../acisf10478/products/events/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_src.evt.gz[events] = 108 counts
[Wed Oct 19 00:42:19 2011] Mean chipx,y = (633.26, 90.18)
[Wed Oct 19 00:42:19 2011] Mean tdetx,y = (3508.26, 1792.18)
[Wed Oct 19 00:42:19 2011] chipx,y range = (605.00-662.00, 66.00-114.00)
[Wed Oct 19 00:42:19 2011] Size of ../../acisf10478/products/events/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 879 counts
[Wed Oct 19 00:42:19 2011] ../../acisf10478/products/images/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_src.img and ../../acisf10478/products/images/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct 19 00:42:19 2011] ../../acisf10478/products/spectra/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_src.pi and ../../acisf10478/products/spectra/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct 19 00:42:19 2011] Not generating rmf since there are only 40 counts
[Wed Oct 19 00:42:22 2011] ../../acisf10478/products/lightcurves/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_src.lc and ../../acisf10478/products/lightcurves/fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct 19 00:42:46 2011] 185.287
[Wed Oct 19 00:44:14 2011] Updating aperture counts using extracted products
[Wed Oct 19 00:44:14 2011] Error reading totcts from fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 19 00:44:14 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 00:44:14 2011] Using photon index=1.80, rate=0.000341, arf fullrun_ccd6_acisf10478_pi14-548_pass1_cl_src2.arf
[Wed Oct 19 00:44:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 00:44:14 2011] Updating source flux to 4.2e-15
[Wed Oct 19 00:44:29 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting