[Thu Oct 20 09:21:40 2011] Detection parameters:
  Position = (795.8, 752.0) = 10 46 0.32 4 28 15.5
  Extent = 0.9" x 0.6", rotation angle = 138 degrees
  Source counts = 97.6 +/- 10.1
  Background counts = 5.4
  Rate = 0.01 +/- 0.001

[Thu Oct 20 09:21:41 2011] Off-axis axis estimate = 6.01'
[Thu Oct 20 09:22:15 2011] Using EEF radius (= 1.64 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 09:22:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 09:22:15 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Thu Oct 20 09:22:15 2011] source mask rpix=3.3, npix_max = 58, mask sum = 58, frac = 0.992
[Thu Oct 20 09:22:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.64"
[Thu Oct 20 09:22:16 2011] fullrun_ccd6_acisf10476_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 09:22:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10476_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 09:22:16 2011] fullrun_ccd6_acisf10476_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 09:22:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10476_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 09:22:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10476_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10476_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 09:22:16 2011] fullrun_ccd6_acisf10476_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 09:22:16 2011] fullrun_ccd6_acisf10476_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 09:22:16 2011] Fit fullrun_ccd6_acisf10476_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 09:22:20 2011] Spatial fit model total counts = 144.845000, observed total counts = 138.000000
[Thu Oct 20 09:22:20 2011] Offset between fit and detection position for source 1 = 1.334814 pixels
[Thu Oct 20 09:22:20 2011] 143.965950 total counts/ 0.295950 bgd. counts: snr = 264.093018
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.334814 pixels
  Position = (796.9, 751.4) = 10 46 0.30 4 28 14.9
  Extent = 2.4 (2.0-2.6)", rotation angle = 0
  Source counts = 143.7 +/- 12.0
  Background counts = 0.3
  Rate = 0.01 +/- 0.001
[Thu Oct 20 09:22:20 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 09:22:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 09:22:20 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 09:22:20 2011] Source does appear to be extended
[Thu Oct 20 09:22:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 09:22:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 09:22:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 09:22:34 2011] Initial guess for spatial extent in simple fitting = 2.36"
[Thu Oct 20 09:22:34 2011] source mask rpix=4.8, npix_max = 111, mask sum = 92, frac = 0.822
[Thu Oct 20 09:22:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.36"
[Thu Oct 20 09:22:34 2011] fullrun_ccd6_acisf10476_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 09:22:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10476_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 09:22:34 2011] fullrun_ccd6_acisf10476_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 09:22:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10476_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 09:22:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10476_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10476_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 09:22:34 2011] fullrun_ccd6_acisf10476_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 09:22:34 2011] fullrun_ccd6_acisf10476_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 09:22:34 2011] Fit fullrun_ccd6_acisf10476_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 09:22:39 2011] Spatial fit model total counts = 152.624000, observed total counts = 146.000000
[Thu Oct 20 09:22:39 2011] Offset between fit and detection position for source 1 = 0.427967 pixels
[Thu Oct 20 09:22:39 2011] 152.370220 total counts/ 8.170220 bgd. counts: snr = 50.448515
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.427967 pixels
  Position = (796.5, 751.4) = 10 46 0.31 4 28 14.9
  Extent = 2.4 (2.1-2.7)", rotation angle = 0
  Source counts = 144.2 +/- 12.3
  Background counts = 8.2
  Rate = 0.01 +/- 0.001
[Thu Oct 20 09:22:39 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 09:22:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 09:22:39 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 09:22:39 2011] Source does appear to be extended
[Thu Oct 20 09:22:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 09:23:10 2011] Not overwriting source region fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 20 09:23:10 2011] Extracting stamp from image fullrun_ccd6_acisf10476_pi14-548_cl_sm2.00.img.gz, (686, 641) - (907, 862)
[Thu Oct 20 09:23:10 2011] Writing fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1.gif
[Thu Oct 20 09:23:11 2011] ../../acisf10476/products/events/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_src.evt and ../../acisf10476/products/events/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 20 09:23:11 2011] Size of ../../acisf10476/products/events/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_src.evt.gz[events] = 145 counts
[Thu Oct 20 09:23:11 2011] Mean chipx,y = (509.95, 398.95)
[Thu Oct 20 09:23:11 2011] Mean tdetx,y = (3384.95, 2100.95)
[Thu Oct 20 09:23:11 2011] chipx,y range = (485.00-533.00, 370.00-424.00)
[Thu Oct 20 09:23:11 2011] Size of ../../acisf10476/products/events/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 42 counts
[Thu Oct 20 09:23:11 2011] ../../acisf10476/products/images/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_src.img and ../../acisf10476/products/images/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 20 09:23:11 2011] ../../acisf10476/products/spectra/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_src.pi and ../../acisf10476/products/spectra/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 20 09:23:14 2011] ../../acisf10476/products/lightcurves/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_src.lc and ../../acisf10476/products/lightcurves/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 20 09:24:16 2011] Keeping rmf generated by specextract
[Thu Oct 20 09:24:16 2011] 179.662
[Thu Oct 20 09:24:42 2011] Updating aperture counts using extracted products
[Thu Oct 20 09:24:42 2011] Error reading totcts from fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 20 09:24:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 09:24:42 2011] Using photon index=1.80, rate=0.0146, arf fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 09:24:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 09:24:42 2011] Updating source flux to 1.7e-13
[Thu Oct 20 09:24:50 2011] Reading fit data from acisf10476/analysis//spectral/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_pl.csv
[Thu Oct 20 09:24:50 2011] Spectral fit parameter nH value = 424874000000.0
[Thu Oct 20 09:24:50 2011] Spectral fit parameter PhoIndex value = 1.74327
[Thu Oct 20 09:24:50 2011] Failed to get F(0.3-8.0) from acisf10476/analysis//spectral/fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 09:24:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 09:24:50 2011] Using Nh = 4.2e+11, photon index=1.74, rate=0.0146, arf fullrun_ccd6_acisf10476_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 09:24:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 09:24:50 2011] Updating source flux to 1.8e-13