[Thu Oct 20 02:04:43 2011] Detection parameters:
  Position = (253.0, 605.7) = 7 42 6.99 74 15 36.9
  Extent = 0.8" x 0.5", rotation angle = 161 degrees
  Source counts = 19.3 +/- 4.6
  Background counts = 1.7
  Rate = 0.001 +/- 0.0002

[Thu Oct 20 02:04:44 2011] Off-axis axis estimate = 1.79'
[Thu Oct 20 02:05:16 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 02:05:16 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Oct 20 02:05:16 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.842
[Thu Oct 20 02:05:16 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.41"
[Thu Oct 20 02:05:16 2011] fullrun_ccd3_acisf10471_pi14-548_cl_pass0_src4.ximg exists
[Thu Oct 20 02:05:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10471_pi14-548_cl_pass0_src4.csv
[Thu Oct 20 02:05:16 2011] fullrun_ccd3_acisf10471_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Oct 20 02:05:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10471_pi14-548_cl_pass0_src4.csv
[Thu Oct 20 02:05:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10471_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10471_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 02:05:16 2011] fullrun_ccd3_acisf10471_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Oct 20 02:05:16 2011] fullrun_ccd3_acisf10471_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Oct 20 02:05:16 2011] Fit fullrun_ccd3_acisf10471_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Oct 20 02:05:21 2011] Spatial fit model total counts = 22.998300, observed total counts = 23.000000
[Thu Oct 20 02:05:21 2011] Offset between fit and detection position for source 3 = 1.271677 pixels
[Thu Oct 20 02:05:21 2011] 23.419250 total counts/ 7.043450 bgd. counts: snr = 6.170350
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.271677 pixels
  Position = (254.2, 605.9) = 7 42 6.90 74 15 36.7
  Extent = 0.5 (0.4-0.9)", rotation angle = 0
  Source counts = 16.4 +/- 4.8
  Background counts = 7.0
  Rate = 0.0008 +/- 0.0002
[Thu Oct 20 02:05:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 02:05:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 02:05:21 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 02:05:21 2011] Source does appear to be extended
[Thu Oct 20 02:05:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 02:05:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 02:05:37 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Thu Oct 20 02:05:37 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.901
[Thu Oct 20 02:05:37 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.53"
[Thu Oct 20 02:05:38 2011] fullrun_ccd3_acisf10471_pi14-548_cl_pass1_src4.ximg exists
[Thu Oct 20 02:05:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10471_pi14-548_cl_pass1_src4.csv
[Thu Oct 20 02:05:38 2011] fullrun_ccd3_acisf10471_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Oct 20 02:05:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10471_pi14-548_cl_pass1_src4.csv
[Thu Oct 20 02:05:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10471_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10471_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 02:05:38 2011] fullrun_ccd3_acisf10471_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Oct 20 02:05:38 2011] fullrun_ccd3_acisf10471_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Oct 20 02:05:38 2011] Fit fullrun_ccd3_acisf10471_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Oct 20 02:05:43 2011] Spatial fit model total counts = 23.992100, observed total counts = 24.000000
[Thu Oct 20 02:05:43 2011] Offset between fit and detection position for source 3 = 0.006195 pixels
[Thu Oct 20 02:05:43 2011] 24.485410 total counts/ 8.256010 bgd. counts: snr = 5.648295
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006195 pixels
  Position = (254.2, 605.9) = 7 42 6.90 74 15 36.7
  Extent = 0.5 (0.4-0.8)", rotation angle = 0
  Source counts = 16.2 +/- 4.9
  Background counts = 8.3
  Rate = 0.0008 +/- 0.0003
[Thu Oct 20 02:05:43 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 02:05:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 02:05:43 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 02:05:43 2011] Source does appear to be extended
[Thu Oct 20 02:05:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 02:07:00 2011] Not overwriting source region fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_src.reg
[Thu Oct 20 02:07:00 2011] Extracting stamp from image fullrun_ccd3_acisf10471_pi14-548_cl_sm2.00.img.gz, (230, 582) - (278, 630)
[Thu Oct 20 02:07:00 2011] Writing fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3.gif
[Thu Oct 20 02:07:09 2011] ../../acisf10471/products/events/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_src.evt and ../../acisf10471/products/events/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct 20 02:07:09 2011] Size of ../../acisf10471/products/events/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_src.evt.gz[events] = 18 counts
[Thu Oct 20 02:07:09 2011] Mean chipx,y = (412.50, 938.56)
[Thu Oct 20 02:07:09 2011] Mean tdetx,y = (4193.44, 3473.50)
[Thu Oct 20 02:07:09 2011] chipx,y range = (395.00-430.00, 920.00-954.00)
[Thu Oct 20 02:07:09 2011] Size of ../../acisf10471/products/events/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 12 counts
[Thu Oct 20 02:07:09 2011] ../../acisf10471/products/images/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_src.img and ../../acisf10471/products/images/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct 20 02:07:09 2011] ../../acisf10471/products/spectra/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_src.pi and ../../acisf10471/products/spectra/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct 20 02:07:09 2011] Not generating rmf since there are only 16 counts
[Thu Oct 20 02:07:12 2011] ../../acisf10471/products/lightcurves/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_src.lc and ../../acisf10471/products/lightcurves/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct 20 02:07:16 2011] 196.153
[Thu Oct 20 02:07:18 2011] Updating aperture counts using extracted products
[Thu Oct 20 02:07:18 2011] Error reading totcts from fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct 20 02:07:18 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 02:07:18 2011] Using photon index=1.80, rate=0.000834, arf fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3.arf
[Thu Oct 20 02:07:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 02:07:18 2011] Updating source flux to 1e-14
[Thu Oct 20 02:07:23 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 20 02:07:24 2011] acisf10471/analysis//spectral/fullrun_ccd3_acisf10471_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete